EIE Instruments Pvt. Ltd

Paldi, Ahmedabad, Gujarat

Dissolution rate test equipment consists of a water bath made of perspex sheet with transparent at top, fitted with a thermostatic control, maintains the temperature of water 37 deg. C. Covered vessel 1000 ml made of corning glass. Provided with variable speed motor. Cylindrical basket and shaft with blades of stainless steel. Only distilled water be filled in the water bath.

Digital RPM display for above, at extra cost.

G.I. Frame Sieves (30 & 45 cms Dia)

• EIE-202 Aluminium Chamber
• EIE-202 Stainless Steel Chamber
• EIE-202 Complete Stainless Steel Chamber

Double walled, outer CRC - powder coated, 75 mm thick glasswool insulation, 80/20 Nichrome heating elements placed under ribs at bottom and sides for uniform heat distribution., Temp. range 5 C above ambient to 70 C controlled by sensitive thermostat, complete with \'L\' Shaped thermometer having glass window on door.

Salient Features

• Exterior boy is fabricated from Mild Steel material, which is powder coated in attractive shades.
• Interior chamber is also fabricated from Mirror polished Stainless Steel S.S. - 304 Material
• Doube walled metal door with sponge - type silicon gasket to offer air-tight sealing
• Air-tight sealing avoids leakage of chamber uniformity
• Electrical wiring as per CE
• Cord wire is duly tested and inspected with stress factor as per CE standard
• Electric Motor of blower is located at the back side of unit, which is protected with safety cover to avoid accident
• Standard motor of Marathon/CG/Equivalent reputed make
• User friendly and tactfully designed chamber door and locking mechanism
• Aesthetic outer appearance and unique design features
• Unit mounted on castor wheels for easy movement.
• Supplied complete with Stainless Steel Trays for sample placement
• Supplied complete IQ, OQ, PQ, DQ Documentation and instruction manual.

• High temperature safety cut off (Thermostat)
• Electrical overload safety (Fuse 10 Amperes)
• Time delay for compressor switch ON

• An operator shall maintain Room temperature around machine preferably at 25 C with air conditioning system or shall arrange for a well ventilated room with exhaust fan. However, surrounding temperature should not exceed 30 C .
• Stabilized Input Voltage of 230 Volt, 50 Hz, 20 Amps, AC Supply must be available for error less performance of the instrument. Use of Servo Controlled Stabilizer is recommended.

Fume hoods are recommended for exhaust from the hood working area of gases, vapour, toxic particles & odour to improve working environment of people who regularly handle toxic substances. Theese eqipment reduce personal exposures and odor level in the laboratory. The Fume Hoods are designed to exhaust toxic or otherwise harmful vapors etc. for protecting laboratory personnel & equipments. A motor-blower exhaust system generates negative pressure within the hood, extracting the contaminated air from the working area and expelling it outside the building atmosphere and thereby preventing the fumes spreading into the room.

• The main body of the fumes hood is asbestos or FRP lined.
• The work surface (worktable) is of stainless steel sheet.
• A small S.S. Sink, water tap and water outlet are provided.
• A sliding door made of acrylic, moves vertically up/down with counter balanced weight operated by steel rope.
• Hood is provided with fluorescent light for easy working in the chamber.
• A metal clad socket and gas cock is also provided in the chamber.
• The control panel is fitted with on/off toggle switches for mains, motor-blower and tube light and mains indicator.
• Powerful exhaust assembly of 150 mm dia 20 feet long PVC ducting with rain guard. The additional length of PVC ducting will be at extra cost.

• L4 x D2 x H2
• L5 x D2 1/2 x H3
• L6 x D3 x H3

Double Walled - Inner SS - Outer GI - 3" Gap Puf/Glass Wool Insulation; Full length inner glass or acrylic door for clear inner view - Outer metal door with Magnetic Gasket & Lock. Forced air circulation for uniform temperature throughout the chamber. Dual preset electronic Digital Temperature Controller Cum Indicator. Temperature Range : 5C above ambient to 60C 1C Humidity Range from atmospheric humidity to 90% Rh Controlled by Digital Display Controller (Direct RH Indicator) 3% Rh.(The old system of wet and dry bulb temp. indicator is now obslote)

• EIE-203, TEMP. 5 ABOVE AMBIENT TO 60C
• EIE-203 TEMP. RANGE 5 TO 60C

Specifically designed to have combined advantage of a closely controlled incubation / Storage temperatures with orbital shaking necessary for many laboratory procedures. Dual display digital electronic temperature controller and a platform capacity of 16 conical flasks of 500 ml. The shaking speed to vary between 50 to 250 R.P.M. with digital speed meter. The interior of incubator will be made of S. S. with glass window. Chamber illumination by 4 nos. fluorescent tubes of 60 cm. with 7 days programmable timer.

Construction Details

• CE Certified
• Double wall construction
• Designed as per ICH guidelines to meet, WHO and USFDA requirement
• Fulfills storage conditions of 25° C - 60% RH, 40° C - 75% RH, 30° C - 65% RH, 25° C - 40% RH, 30° C - 35% RH
• Interior fabricated from high grade stainless steel (S.S.304).
• Exterior body made of Mild steel material - which is duly powder coated in attractive shades
• Full size polycarbonate sheet inner door to inspect samples without affecting the control parameters.
• Electrical wiring as per CE Compliances
• Chamber illumination is accomplished by Fluorescent light with door switch.
• Cord wire duly tested and inspected with stress factor as per CE standard
• Standard motor of reputed companies for chamber blower
• User friendly and tactfully designed chamber door and locking mechanism
• Aesthetic outer appearance and high quality
• Unit mounted on castor wheels for easy movement.

Insulation

70mm polyurethane insulation (PUF)/ fiberboard to ensure better insulation and less leakage of temperature or RH from inner body to the surroundings.

Air Circulation

Quiet running blower maintains Uniform Temperature Distribution throughout the chamber. Forced air circulated vertically down and re-circulated throughout the chamber for uniform temperature distribution.

Heating & Cooling System

Long lasting U-Shaped tubular heaters used as heating element. Hermetically sealed compressor, which is CFC free and eco-friendly, utilizes the refrigerant (R-134A gas) to maintain chamber temperature within specified range.

Trays for samples

• Removable perforated trays
• Can withstand heavy load
• Offer better air circulation

Safety Features

• High temperature safety cut off
• Low water level boiler cut off
• Electrical overload cut off
• Time delay for compressor switch ON
• Electrical circuit breaker
• Optional accessories
• 21-CFR Compliance software with PC Communication
• Highly advanced HMI & PLC Control system
• SMS facility to Mobile device
• Data logger with 4 temperature + 4 Humidity sensors
• Spare RH Sensor for validation purpose
• Spare PT-100 Sensor for validation purpose