EIE Instruments Private Limited

Paldi, Ahmedabad, Gujarat

• 21-CFR Compliance software with PC Communication
• Highly advanced HMI & PLC Control system
• GSM Alert through SIM Card
• Data logger with 4 temperature + 4 Humidity sensors
• Spare PT-100 Sensor for validation purpose
• Standby Refrigeration System
• Biometrics Magnetic Door Access for Secured Door opening with software to maintain log
• On-Site Validation (mapping) for 24 hours on Empty, Half and Full load condition

• Standalone upright model with single front glass door, interior lighting and door handle
• Frost free cooling effect
• compressor coupled with evaporation coil & condenser
• Highly Energy efficient
• Uniform cooling by forced air circulation
• Adjustable epoxy plastic coated rods shelves
• Clear product visibility through transparent glass door
• Unique design for automatic defrost and condensate removal refrigerator
• Ultra fast pull down, Auto defrost with self-evaporating drip tray
• Rear to front hot air anti - condensation
• Temperature controller : Microprocessor based Auto-Tune Digital PID controller
• Temperature Display : LED Display
• Temperature Sensor : High-quality PT-100 Temperature sensor
• Temperature range : 2 C to 8 C
• Temperature Accuracy : 0.5 C
• Temperature Uniformity : 0.1 C
• Safety devices : Low temperature cut-off settable thermostats
• Alarm systems : Audio/Visual alarms for deviations
• Operation on : 230 Volts, 50 Hz, AC Supply
• Mobility : Feet on castor wheels fitted with brakes
• Available in following sizes

Most ideal for precise temperature control and simultaneous shaking applications required in fermentations studies, enzyme reaction s, life sciences, tissue culture and biotechnology, research labs.

• A standard load is allowed to fall on the empty tube and the resistance offered to this load is measured.
• Designed For tube of diameter :13.5mm
• Grooving radius : 32 mm
• Grooving Depth : 5 0.2 mm
• Distance b/w stopper & shutter : 32 mm
• Shutter weight : 70 1 Gram
• The auxiliary base plate is to be inserted in the apparatus.
• Complete with stand, shutter mechanism and scale.

• Salient Features
• Inner Tank & Outer body made of Stainless Steel
• Digital RED LED display
• Temperature with timer function
• Ceramic heaters provides improved heating effect
• Drainage and cool fan available in 6L to 25L
• Overheat protector, Cooling fan
• Moisture-proof PCB
• User friendly
• High-performance transducers

• Compact and Rugged construction
• Identical choice for general laboratory or small pilot plant
• Easy cleaning & Maintenance
• Extremely fast & efficient primary crushing
• Two jaws of manganese steel are provided in the jaw crusher.
• Moveable jaw produces two blows for every revolution, thus reducing over sizing to a minimum.
• Combination of forward and downward strokes with a rocking action exerts pressure on the coarse material to pass through the jaws.
• Fitted with hopper at the top for feeding materials.
• Smooth jaws ensure a uniform product output
• Start & Stop push button, overload protection for motor

We are the main supplier of this product.

.

We are the main supplier of this product.

• Aesthetic exterior appearance
• Reliable and sturdy construction
• Reduces testing time and cost
• Eliminates exposure to harmful solvents (Environmental friendly operation)
• Fully automatic test cycle, which frees technician for other tasks.
• Magnetic door lock system to avoid sudden accident
• Integrated weighing system monitors sample weight with high precision
• Automatic printout of test result at end of test
• 7 Touch screen HMI & PLC Controller
• Allows easy navigation of parameter setting, Debugging and Calibration

To prepare correct "V" or "U" notches in Charpy/Izod impact test specimens by means of an accurate multiple-toothed broach.

• Most simple and accurate
• Specifically drafted for ferrous & nonferrous material .
• Skilled operator not required
• Expensive machines not required
• Precision regrinding of tools eliminated
• Less power requirement
• Very compact in size
• Precisely cuts the desired notches as per respective standard in just single pass within few seconds.
• No efforts, all by motorized operation. Just press a push button to start.
• Equipped with broach guard for safety.
• Easy removal & assembly of broach
• Longer broach Life.
• Ball Screw for uniform cutting action.
• Hardness rods with LM bushes for smooth motion.
• Micrometer for fine feed and adjustment
• Excellent notch finish & Excellent Repeatability.
• Front door window access for observing the operation

ASTM A370, BS 131: Part 1: 1961 / Part 2&3: 1972, DIN: 50115, IS/1598/1977

Salient Features

• Double wall construction
• Interior fabricated from high grade stainless steel (S.S.304).
• Exterior body made of Mild steel material which is duly powder coated in attractive shades
• Double walled metal door with sponge type silicon gasket for air tight sealing
• Chamber illumination is accomplished by Fluorescent light with door switch.
• User friendly and tactfully designed chamber door and locking mechanism
• Equipped with Digital controller and Imported Temp, RH & CO2 Sensors
• Humidity generation by steam injection method
• Uniformity is maintained by quiet running blower.
• Hermetically sealed compressor CFC free compressor (134 A gas) coupled with evaporation coil and condenser.
• Removable perforated trays to facilitate better air circulation through samples
• Microprocessor based Digital Auto Tune PID temperature and direct RH digital controller.
• CO2 Indicator with imported CO2 Sensor
• Electrical wiring as per CE Compliances
• Aesthetic outer appearance and high quality

Safety Features

• High temperature safety cut off
• Low water level boiler cut off
• Electrical overload cut off
• Time delay for compressor switch ON
• Electrical circuit breaker

We are the main supplier of this product.

We are the main supplier of this product.

• Instrument to determine the resistance to Deep abrasion, by measuring the length of the Groove produced on the specimen surface by a disk that turns at controlled angular speed and makes constant pressure onto the specimen. A controlled feed of abrasive material falls between the disc and specimen.

• Corundum (white fused aluminium) (5 kg)
• Austrian granite for the calibration
• 400 g of lead to modify the weight
• special key for removing the abrasive disk

• Easy to use and with solid construction
• Electric operation
• Mild steel structure body with powder coating paint
• Electronic control of the disc speed with auto shut-off of the instrument at the achievement of the selected number of revolutions
• Strictly abiding to listed international standards

• Innovatively designed compact load frame
• Two pillar frame
• Equipped with Stepper Motor & Stepper Drive to offer various strain rates
• Also equipped with Touch screen HMI & PLC Controller
• HMI is loaded with highly advanced calculation programs for conducting triaxial test
• Offers results of mm extension, load and pressure indication
• Aesthetic exterior appearance
• Variable speed from 0.01 mm / min to 10 mm / min.
• Displays load and displacement both on the same screen
• Saves load and flow data at every 30 sec interval.

• Load Frame motorized capacity : 50 KN (5000 kgf) giving 08 different rates of strain
• Load cell 2 KN (200 kgf) capacity resolution (1 kgf) strain gauge in full bridge configuration.
• Pore Pressure transducer : 20 bars (20kg / cm2) WITH 0.01 kg/cm2 ACCURACY
• LVDT (displacement sensor) having a range of 25 mm with resolution of 10 microns (0.001 mm).
• Triaxial cell : Stationary bushing as per IS 2720 part XII for 38 mm dia specimen x 76 mm long. Consisting of Perspex chamber, anvil, loading pressure up to 10.5 kg/cm2 with oil plug, air vent and no volume change type valves and kit. Kit consists of plain Perspex disc pair 38 mm dia x 6 mm thick Perspex top loading pad two way split former pair of porous stones sheath. Stretcher 12 nos Rubber sheaths 8 nos. 'O'rings one drainage connection including. 3 part split former with collar, base plate, hinged clamp. End former for 2 mm bore x 4 mm triaxial cell will be compatible for electronic outfit system. Power Supply : 220-240 V, A.C. 50 Hz, single phase
• Self Compensating pressure apparatus oil-water dead weight type. Pressure range 10.5 kg/cm2 in steps of 0.5 kg/cm2 with indicator.
• Lateral pressure assembly : 0-10.5 kg/cm2 with pressure chamber, pressure gauge, null indicator, copper coil water reservoir and foot pump

Consists of a rigid support frame, incorporating a water tank mounted on a platform. A mechanical lifting device is used to raise the water tank through the frame height immersing the specimen suspended below the balance. The balance supplied may also be used as a standard weighing device, thus providing a versatile and comprehensive weighing system in the laboratory

WEIGHING IN AIR AND IN WATER FRAME : Consisting of a rigid frame, water tank, and cradle.

Used for specific gravity and water absorption test of aggregate. The basket is used in conjunction with a suitable electronic balance, a specially designed robust frame to support the electronic balance and water tight container.
The Density basket is of 20cm dia x 20cm high fitted with galvanized wire mesh of 6.3mm with handle for suspending it from the balance.

The following accessories are not part of the standard supply and are supplied at an extra cost.

• Electronic Balance capacity 5 kg x 0.5gm / 5 kg x 0.1 gm with under bench weighing facility.
• Laboratory Oven.
• Water tight container.

Used for rapid collection of the true representative sample from aggregate, sand and filters.

Consists of a metal box fitted with a series of chutes of equal width which discharge the material alternatively in opposite directions into separate pans. The chutes of the riffle are steep enough to allow rapid flowing of the material. Each riffle sample divider supplied with two pans and one scoop.