Measurement of the surface gloss of paint, powder coating, marble, granite, plastic, woodenware, paper and ceramic, metallic coatings

• The light source needs no replacing forever. A full-scale charged low consumption AA battery works more than 24 hours. The instrument is absolutely portable .

• CE Certified
• Double wall construction
• Fulfills storage conditions of 25 C - 60% RH, 40 C - 75% RH, 30 C - 65% RH, 25 C - 40% RH, 30 C - 35% RH
• Designed for testing product shelf life, Packing and Electronic test.
• Specially designed to meet ICH, WHO & USFDA requirements.
• Full size polycarbonate sheet inner door to inspect samples without affecting the control parameters.
• Electrical wiring as per CE Compliances
• Illuminated working area
• User friendly and tactfully designed chamber door and locking mechanism
• Forced air circulation for uniform temperature and RH Distribution
• Ensures smooth air-flow pattern to improve the Temp & Humidity distribution across the chamber
• U-Shaped tubular heaters as heating element.
• Unit mounted on castor wheels for easy movement.
• Uniformity module with 4 + 4 RH & Temp Sensors (Optional)
• Password protected door access and monitoring (Optional)
• GSM module for SMS Alert (Optional)
• Serial port for PC interface with 21-CFR Compliant software (Optional software)
• Standby Humidity control system and Standby refrigeration system (Optional)

• CE Certified
• Light weight Sandwich panel
• Fulfills storage conditions of25 C - 60% RH, 40 C - 75% RH, 30 C - 65% RH, 25 C - 40% RH, 30 C - 35% RH
• Designed for testing product shelf life, packing and electronic test.
• Specially designed to meet ICH, WHO & USFDA requirements.
• Main Door with observation window to inspect samples
• Electrical wiring as per CE Compliances
• Illuminated Working area
• Password protected door access and monitoring
• U-Shaped tubular heaters as heating element.
• Non Condensing steam injection type humidity system with standby heater & auto switch over
• Mains-Fail Detection & Automatic Change Over to Battery/Inverter
• High speed Ethernet communication
• Uniformity module with 4 + 4 RH & Temp Sensors
• Forced air circulation for uniform temperature and RH Distribution
• Ensures smooth air-flow pattern to improve the Temp & Humidity distribution across the chamber
• GSM module for SMS Alert(Optional)
• Serial port for PC interface with 21-CFR Compliant software(Optional software)
• Standby Humidity control system and Standby refrigeration system(Optional)

ASTM D5, ASTM D217, ASTM D937, ASTM D1321, AASTHO T-49, IP 50, IP 49, IP 179

• Needle Penetration of Bituminous Materials ASTM D5; IP 49; DIN 52010
• Cone Penetration of Lubricating Grease ASTM D217; IP 50; ISO 2137; DIN 51804; FTM 791-311, FTM 791-313
• Cone Penetration of Petrolatum ASTM D937; IP 179; ISO 2137; DIN 51580
• Needle Penetration of Petroleum Waxes ASTM D1321; IP 376; DIN 51579
• Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment ASTM D1403; IP 310; ISO 2137; DIN 51804

• Paper, Pigents, Textiles, Tiles, Food Items, Minerals

• Ideal for measuring whiteness & brightness of objective samples
• Same instrument can be used to measure Whiteness & Brightness by changing filters only
• Standard MgCo3 block supplied with the instrument
• Simple to operate
• Instrument conforms to the basic requirement of IS : 101
• Specifications
  • Light Source : Long life LED / Tungsten Lamp
  • Detector : Sealed silicon photo detector
  • Diffuse Reflectance : 00.0 to 100.00 with negative & over range indication,
  • Display : 3.5 digit LED (With decimal display)
  • Accuracy : 1 %
  • Accessories : MgCO3 block as a secondary standard, Power Trays, Pressure Plate, Dust Cover, Manual, Plate for MgO Deposition, Mg wire
  • Dimensions : 12" x 8" x 7.5"
  • Weight Net : 3.5 Kg
  • Operating Voltage : 230 V, 50 Hz, Single Phase, AC Power supply

This test covers determination of the density of freshly mixed concrete and gives formulas for calculating the yield, cement content, and air content of the concrete. Yield is defined as the volume of concrete produced from a mixture of known quantities of the component materials.
Bulk density is determined by filling a container of known volume and mass of concrete required to fill the container divided by the volume .

Made from thick walled Mild steel or cast aluminum. Stout and rigid to retain form and Precision machined for true measurements. Complete with handles for easy carriage. It comprises of set of two measures 20 litres & 10 litres.

Used for specific gravity and absorption of fine aggregates. The equipment comprises of a conical metal mould 1.5 dia at the top, 3.5 dia at the base and 2.7/8 in height and a metal tamping rod weighing 12 ounces and having a flat circular tamping face 1 dia.

• Hand operated
• With Automatic Timer

Hand Operated :

The apparatus consist of a cast aluminium base with an iron stand on which moves an aluminium arm. A 6" dial is fixed on this arm and a brass chromium plated rod slide through the lower portion of the arm. A needle with weights is fitted to this rod. The dial is graduated from 0-400 in one tenth millimeter sub division. Supplied complete with adjustable needle holder, penetration needle sample container, transfer dish and weight of 50 gms.

With Automatic Timer :

Same as above but with automatic digital timer and electrical arrangement.

With 45 Diffuse reflectance head with Tristimulus green filter for whiteness of sample with head for brightness measurement or for opacity measurement.

Air content of fresh concrete is normally measured, by the use of a special air meter, to assess whether the concrete contains the required amount of air. This would be measured when airs entrapment or entrainment is required by the concrete design. The method uses the principle of replacing the air in a known volume of concrete with water, the volume of which can then be measured.

General Descripation & Specifications

The apparatus consists of a pressure tight flanged cylindrical measuring bowl of specified volume in accordance with size of aggregate to be tested. The bowl is fitted with a removable flanged conical cover assembly with the help of a airtight sealing gasket. The conical cover has an air valve and a pet cock for bleeding off the water. A transparent cylindrical stand pipe, which is graduated in air content, is fixed to the conical cover assembly.
Pressure is applied to the specimen with the help of pressure bulb and the pressure is recorded on the pressure gauge which is mounted on the stand pipe. The whole assembly is mounted on a flat base.

Standard Accessories :

Calibration cylinder with spring clamp, Trowel, Tamping rod, Straight edge, Rubber mallet andmeasure. 1 No. each

This test is used to determine the elapsed time between batching of a concrete sample and when it is deemed by standard methods to have set. The method involves measuring the penetration resistance of a test sample, which has had coarse particles removed at periodic intervals. It is particularly useful, in determining the effect on setting time of admixtures in the concrete, where these may have been introduced specifically to increase the setting time.
It consists of cylindrical spring housing with a plunger attached to the top of the spring. Penetration needle is attached to the other end of the spring housing. The plunger is graduated in 1 kg divisions, to a maximum capacity of 60kg, which can be read with respect to the top end of the spring housing. A set of six needle points with areas of 645, 323, 161, 65, 32 and 16mm2 are provided. Supplied complete in a wooden carrying case.

Consists of a needle having face area 3/10 sq.cm. and graduated at a distance of 25mm. The needles point is an integral part of barrel which houses a calibrated spring. The spring is confined in a sleeve. The resistance offered by the concrete mortar is shown on the direct reading scale with a marker ring which holds its position when released. Scale range is 0-50 kg/cm2 when the penetration resistance reaches a value of 35kg/cm2 the concrete is assumed initially set. Supplied complete in a leather carrying case. AS PER ASTM C-403

The unit consists of two movable frames pivoted at one end. The lateral extensometer is fixed to the specimen with the help of tightening screws. The lateral extension is indicated on a dial gauge of 0.002 mm x 12 mm travel. The extension is magnified 2.5 times and the dial gauge readings are to be divided by 2.5 to get the exact readings. A spacer strip is provided to initially set the dial gauge and can be removed after initial setting. Supplied in a wooden carrying case.

With consists of a brass cup held on an adjustable bracket. The bowl can be adjusted for a fall raised & dropped on a rubber of standard hardness by cam action. Complete with one casagrande grooving tool, one ASTM grooving tools and a height gauge block. Hand operated, with counter. As per IS : 2720 (Part-V), IS : 9259, BS : 1377, AS : 89

With consists of a brass cup held on an adjustable bracket. The bowl can be adjusted for a fall raised & dropped on a rubber of standard hardness by cam action. Complete with one casagrande-grooving tool, one ASTM grooving tools and a height gauge block. With counter. Fitted with a motor geared down to give approximately 120 RPM. Suitable for operation on 230 Volts, single phase, 50 cycles, A.C. supply.

IS : 2720 (Part-V)

The unit consists of a pressure vessel with clamp for sealing cap, rubber sealing gasket, pressure gauge calibrated in percentage moisture content 0-25% X 1% on the wet weight basis, a counter poised balance for weighing sample, a scoop for measuring carbide reagent, a bottle of reagent, one cleaning brush and a set of 4 steel balls(3 OF 12.5MM AND 1 OF 25MM DIA) for thorough mixing. Complete in highly polished wooden carrying case with handle. AS PER IS : 2720(PART II)
OR
Same as above but Deluxe Model with 150mm dia and horizontal pace readout moisture gauge.

Suitable for measuring the diameter of inhibited zone within the range of 0 to 35 mm. with accuracy of 0.02 mm. The equipment operates on 230 Volts Single phase 50 c/s. A.C.

Measurement of the surface gloss of paint, powder coating, marble, granite, plastic, woodenware, paper and ceramic, metallic coatings

• The light source needs no replacing forever. A full-scale charged low consumption AA battery works more than 24 hours. The instrument is absolutely portable .

• CE Certified
• Double wall construction
• Fulfills storage conditions of 25 C - 60% RH, 40 C - 75% RH, 30 C - 65% RH, 25 C - 40% RH, 30 C - 35% RH
• Designed for testing product shelf life, Packing and Electronic test.
• Specially designed to meet ICH, WHO & USFDA requirements.
• Full size polycarbonate sheet inner door to inspect samples without affecting the control parameters.
• Electrical wiring as per CE Compliances
• Illuminated working area
• User friendly and tactfully designed chamber door and locking mechanism
• Forced air circulation for uniform temperature and RH Distribution
• Ensures smooth air-flow pattern to improve the Temp & Humidity distribution across the chamber
• U-Shaped tubular heaters as heating element.
• Unit mounted on castor wheels for easy movement.
• Uniformity module with 4 + 4 RH & Temp Sensors (Optional)
• Password protected door access and monitoring (Optional)
• GSM module for SMS Alert (Optional)
• Serial port for PC interface with 21-CFR Compliant software (Optional software)
• Standby Humidity control system and Standby refrigeration system (Optional)

• CE Certified
• Light weight Sandwich panel
• Fulfills storage conditions of25 C - 60% RH, 40 C - 75% RH, 30 C - 65% RH, 25 C - 40% RH, 30 C - 35% RH
• Designed for testing product shelf life, packing and electronic test.
• Specially designed to meet ICH, WHO & USFDA requirements.
• Main Door with observation window to inspect samples
• Electrical wiring as per CE Compliances
• Illuminated Working area
• Password protected door access and monitoring
• U-Shaped tubular heaters as heating element.
• Non Condensing steam injection type humidity system with standby heater & auto switch over
• Mains-Fail Detection & Automatic Change Over to Battery/Inverter
• High speed Ethernet communication
• Uniformity module with 4 + 4 RH & Temp Sensors
• Forced air circulation for uniform temperature and RH Distribution
• Ensures smooth air-flow pattern to improve the Temp & Humidity distribution across the chamber
• GSM module for SMS Alert(Optional)
• Serial port for PC interface with 21-CFR Compliant software(Optional software)
• Standby Humidity control system and Standby refrigeration system(Optional)

ASTM D5, ASTM D217, ASTM D937, ASTM D1321, AASTHO T-49, IP 50, IP 49, IP 179

• Needle Penetration of Bituminous Materials ASTM D5; IP 49; DIN 52010
• Cone Penetration of Lubricating Grease ASTM D217; IP 50; ISO 2137; DIN 51804; FTM 791-311, FTM 791-313
• Cone Penetration of Petrolatum ASTM D937; IP 179; ISO 2137; DIN 51580
• Needle Penetration of Petroleum Waxes ASTM D1321; IP 376; DIN 51579
• Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment ASTM D1403; IP 310; ISO 2137; DIN 51804

• Paper, Pigents, Textiles, Tiles, Food Items, Minerals

• Ideal for measuring whiteness & brightness of objective samples
• Same instrument can be used to measure Whiteness & Brightness by changing filters only
• Standard MgCo3 block supplied with the instrument
• Simple to operate
• Instrument conforms to the basic requirement of IS : 101
• Specifications
  • Light Source : Long life LED / Tungsten Lamp
  • Detector : Sealed silicon photo detector
  • Diffuse Reflectance : 00.0 to 100.00 with negative & over range indication,
  • Display : 3.5 digit LED (With decimal display)
  • Accuracy : 1 %
  • Accessories : MgCO3 block as a secondary standard, Power Trays, Pressure Plate, Dust Cover, Manual, Plate for MgO Deposition, Mg wire
  • Dimensions : 12" x 8" x 7.5"
  • Weight Net : 3.5 Kg
  • Operating Voltage : 230 V, 50 Hz, Single Phase, AC Power supply

This test covers determination of the density of freshly mixed concrete and gives formulas for calculating the yield, cement content, and air content of the concrete. Yield is defined as the volume of concrete produced from a mixture of known quantities of the component materials.
Bulk density is determined by filling a container of known volume and mass of concrete required to fill the container divided by the volume .

Made from thick walled Mild steel or cast aluminum. Stout and rigid to retain form and Precision machined for true measurements. Complete with handles for easy carriage. It comprises of set of two measures 20 litres & 10 litres.

Used for specific gravity and absorption of fine aggregates. The equipment comprises of a conical metal mould 1.5 dia at the top, 3.5 dia at the base and 2.7/8 in height and a metal tamping rod weighing 12 ounces and having a flat circular tamping face 1 dia.

• Hand operated
• With Automatic Timer

Hand Operated :

The apparatus consist of a cast aluminium base with an iron stand on which moves an aluminium arm. A 6" dial is fixed on this arm and a brass chromium plated rod slide through the lower portion of the arm. A needle with weights is fitted to this rod. The dial is graduated from 0-400 in one tenth millimeter sub division. Supplied complete with adjustable needle holder, penetration needle sample container, transfer dish and weight of 50 gms.

With Automatic Timer :

Same as above but with automatic digital timer and electrical arrangement.

With 45 Diffuse reflectance head with Tristimulus green filter for whiteness of sample with head for brightness measurement or for opacity measurement.

Air content of fresh concrete is normally measured, by the use of a special air meter, to assess whether the concrete contains the required amount of air. This would be measured when airs entrapment or entrainment is required by the concrete design. The method uses the principle of replacing the air in a known volume of concrete with water, the volume of which can then be measured.

General Descripation & Specifications

The apparatus consists of a pressure tight flanged cylindrical measuring bowl of specified volume in accordance with size of aggregate to be tested. The bowl is fitted with a removable flanged conical cover assembly with the help of a airtight sealing gasket. The conical cover has an air valve and a pet cock for bleeding off the water. A transparent cylindrical stand pipe, which is graduated in air content, is fixed to the conical cover assembly.
Pressure is applied to the specimen with the help of pressure bulb and the pressure is recorded on the pressure gauge which is mounted on the stand pipe. The whole assembly is mounted on a flat base.

Standard Accessories :

Calibration cylinder with spring clamp, Trowel, Tamping rod, Straight edge, Rubber mallet andmeasure. 1 No. each

This test is used to determine the elapsed time between batching of a concrete sample and when it is deemed by standard methods to have set. The method involves measuring the penetration resistance of a test sample, which has had coarse particles removed at periodic intervals. It is particularly useful, in determining the effect on setting time of admixtures in the concrete, where these may have been introduced specifically to increase the setting time.
It consists of cylindrical spring housing with a plunger attached to the top of the spring. Penetration needle is attached to the other end of the spring housing. The plunger is graduated in 1 kg divisions, to a maximum capacity of 60kg, which can be read with respect to the top end of the spring housing. A set of six needle points with areas of 645, 323, 161, 65, 32 and 16mm2 are provided. Supplied complete in a wooden carrying case.

Consists of a needle having face area 3/10 sq.cm. and graduated at a distance of 25mm. The needles point is an integral part of barrel which houses a calibrated spring. The spring is confined in a sleeve. The resistance offered by the concrete mortar is shown on the direct reading scale with a marker ring which holds its position when released. Scale range is 0-50 kg/cm2 when the penetration resistance reaches a value of 35kg/cm2 the concrete is assumed initially set. Supplied complete in a leather carrying case. AS PER ASTM C-403

The unit consists of two movable frames pivoted at one end. The lateral extensometer is fixed to the specimen with the help of tightening screws. The lateral extension is indicated on a dial gauge of 0.002 mm x 12 mm travel. The extension is magnified 2.5 times and the dial gauge readings are to be divided by 2.5 to get the exact readings. A spacer strip is provided to initially set the dial gauge and can be removed after initial setting. Supplied in a wooden carrying case.

With consists of a brass cup held on an adjustable bracket. The bowl can be adjusted for a fall raised & dropped on a rubber of standard hardness by cam action. Complete with one casagrande grooving tool, one ASTM grooving tools and a height gauge block. Hand operated, with counter. As per IS : 2720 (Part-V), IS : 9259, BS : 1377, AS : 89

With consists of a brass cup held on an adjustable bracket. The bowl can be adjusted for a fall raised & dropped on a rubber of standard hardness by cam action. Complete with one casagrande-grooving tool, one ASTM grooving tools and a height gauge block. With counter. Fitted with a motor geared down to give approximately 120 RPM. Suitable for operation on 230 Volts, single phase, 50 cycles, A.C. supply.

IS : 2720 (Part-V)

The unit consists of a pressure vessel with clamp for sealing cap, rubber sealing gasket, pressure gauge calibrated in percentage moisture content 0-25% X 1% on the wet weight basis, a counter poised balance for weighing sample, a scoop for measuring carbide reagent, a bottle of reagent, one cleaning brush and a set of 4 steel balls(3 OF 12.5MM AND 1 OF 25MM DIA) for thorough mixing. Complete in highly polished wooden carrying case with handle. AS PER IS : 2720(PART II)
OR
Same as above but Deluxe Model with 150mm dia and horizontal pace readout moisture gauge.

Suitable for measuring the diameter of inhibited zone within the range of 0 to 35 mm. with accuracy of 0.02 mm. The equipment operates on 230 Volts Single phase 50 c/s. A.C.