EIE Instruments Private Limited

Paldi, Ahmedabad, Gujarat

• Robust & Heavy design
• Doesn't require special foundation
• Shaking in both the direction
• Simpler, quicker and more accurate
• Tapping action from the top
• The mechanism for imparting circular action and tapping is permanently lubricated in a tank and is motorized.
• Shaking per minute : 140-160
• Tapping per minute : 280-300
• Can accommodate : 07 sieves of 200mm diameter
• Timer : Digital Pre-settable timer
• Timer Range : 0 to 99 Minutes
• Power supply : 230 V, 50 Hz, Single Phase, AC

• Carries upto 7 sieves of 200mm diameter in single adaptor.
• The shaker is driven by a 1/4 HP motor through a reduction gear.
• A pair of rods and holders is supplied along with the main unit.
• The holder can be fixed on top of the upper most sieves, and thus the sieve set is firmly held.
• Suitable for operation on 230 volts, 50 cycles single phase A.C. Supply.
• Fitted with Digital adjustable timer
• No. of tapping from bottom : 85 to 90
• Timer : Digital Pre-settable timer
• Timer Range : 0 to 99 Minutes

We are the main supplier of this product.

This sieve shaker is designed to carry up to 7 sieves of 6 inch or 8 inch diameter. The 12 inch dia.sieves can be used with the help of Adaptor. A 1/4 HP. motor through a reduction gear immersed in oil drives the shaker. The sieve table dies not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in clockwise direction. If the stop-pin below the table is removed. the shaker can have a rotary motion. In addition to this gyratory motion of the table, there is an upward and downward movement ensuring that each square cm of the sieve is utilized. A pair of rods and a holder is supplied. The holder can be fixed on the top of the upper most sieves, and thus the sieve set is firmly held. Suitable for operation on 230 volts, 50 cycles single phase A.C. Supply.
Adaptor for 30cm dia test sieves can be fitted in above.

This sieve shaker is designed to carry up to 7 sieves of 18" diameter. The shaker is driven by a 1/2 H.P.Electric Motor through a reduction gear. The sieve table does not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in the clockwise direction, in addition to this gyratory motion of the table, there is and upward and downward movement at a frequency of about 270 vibration per minutes ensuring that each square inch of the sieve is utilised. The whole gear mechanism runs in an oil bath, without test sieves or time switch. Suitable for operation from 220 Volts 50 cycles A.C. supply.

• DIGITAL Time switch 0-99 minutes for above
• MECHANICAL Time switch 0-60 minutes for above

this sieve shaker is designed to carry up to 7 sieves of 6 inch or 8 inch diameter. The 12 inch dia.sieves can be used with the help of adaptor. A 1/4 hp. Motor through a reduction gear immersed in oil drives the shaker. The sieve table dies not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in clockwise direction. If the stop-pin below the table is removed. The shaker can have a rotary motion. In addition to this gyratory motion of the table, there is an upward and downward movement ensuring that each square cm of the sieve is utilized. A pair of rods and a holder is supplied. The holder can be fixed on the top of the upper most sieves, and thus the sieve set is firmly held. Suitable for operation on 230 volts, 50 cycles single phase a.c. Supply.
adaptor for 30cm dia test sieves can be fitted in above.

this sieve shaker is designed to carry up to 7 sieves of 18" diameter. The shaker is driven by a 1/2 h.p.electric motor through a reduction gear. The sieve table does not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in the clockwise direction, in addition to this gyratory motion of the table, there is and upward and downward movement at a frequency of about 270 vibration per minutes ensuring that each square inch of the sieve is utilised. The whole gear mechanism runs in an oil bath, without test sieves or time switch. Suitable for operation from 220 volts 50 cycles a.c. Supply.

• digital time switch 0-99 minutes for above
• mechanical time switch 0-60 minutes for above

This is a bench type model which is portable, sturdy and convenient for bench mounting. The side to side movement to the carrier which can take upto 7 sieves of 20cm diameter is through a chain of gears operated by a hand wheel.

This Shaker reproduces both circular and tapping motion, Produces Circular (280-320 RPM approx) and tapping (140-160 RPM approx) motion with a uniform mechanical action which ensures accurate and dependable test results. This shaker is heavy in construction and no special foundation is required. The running parts operate in oil. A 1/4 H.P. electric motor runs the machine, the machine can accommodate six test sieves + set of Lid-pan but is supplied without sieves.

Optional Extra:

• DIGITAL Time switch 0-99 minutes for above
• MECHANICAL Time switch 0-60 minutes for above

(Soundless) Vibration type cast iron body. Electrically operated Fitted with FHPElectric Motor inside the Body having speed regulator to increase of discrease the vibration. The table sieve shaker having the capacity of 6 test sieves of 20cm.dai(without test sieve and time switch.) Adaptor for 30 cm dia test sieves .

• Digital Time switch 0-99 minutes for above
• Mechanical Time switch 0-60 minutes for above

This is a bench type model which is portable, sturdy and convenient for bench mounting. The side to side movement to the carrier which can take upto 7 sieves of 20cm diameter is through a chain of gears operated by a hand wheel.

(Soundless) Vibration type cast iron body. Electrically operated Fitted with FHPElectric Motor inside the Body having speed regulator to increase of discrease the vibration. The table sieve shaker having the capacity of 6 test sieves of 20cm.dai(without test sieve and time switch.) Adaptor for 30 cm dia test sieves .

• Digital Time switch 0-99 minutes for above
• Mechanical Time switch 0-60 minutes for above

This is a bench type model which is portable, sturdy and convenient for bench mounting. The side to side movement to the carrier which can take upto 7 sieves of 20cm diameter is through a chain of gears operated by a hand wheel.