We are the main supplier of this product.

Laboratory Jaw Crusher is designed to speed up the crushing of aggregate, ores, minerals, coal, coke, chemicals and other similar materials. Its compact and of rugged construction is advantageous for general laboratory or small pilot plant operations. Introduction

Two jaws of manganese steel are provided in the jaw crusher. The moveable jaw produces two blows for every revolution, thus reducing over sizing to a minimum. A combination of forward and downward and strokes with a rocking action exerts pressure on the coarse material to pass through the jaws. A hopper is provided at the top for feeding materials. The smooth jaws ensure a uniform product and easy cleaning is possible.

Oven is designed to determine the the effect of heat & air on asphaltic materials (thin film test).

The unit is heavily insulated & has a double glass built in door for view inside temperature is controlled at 163'deg C #1'deg C. by means of a calibrated PID based DIGITAL TEMP. INDICATOR CONTROLLER. inside platform rotated by external motor from 5 to 6 R.P.M. & 2 stainless steel pans are also provided to hold cups. (supplied without cups). Inner chamber made of stainless steel sheet of 304 grade & outer of mild steel sheet stoving painted. To work on 230 volts, AC 50 Hz supply.

For 150mm dia x 300mm high specimen. Consists of two frames for clamping to by means of five tightening screw with a hardened end tappered end. Two spacer hold the two frames in position. A pivot rod rests on pivot screws. A dial gauge, fixed to a bracket fitted to the top frame is used for taking deformation measurement. Supplied complete with dial gauge 0.002mm x 5mm in a nice wooden carrying case.

• EIE-1901, Ordinary
• EIE-1901, Digital

Body made of mild steel with attractive paint. Sloping at front cover with large magnifying lens. Built in large free illumination with black reflection free background. Complete with woulfheugel, counting plate.

Body made of mild steel with attractive paint. Sloping at front cover with large magnifying lens. Built in large free illumination with black reflection free background. Complete with woulfheugel, counting plate. Special pen type probe allows marking & counting simultaneously. Counting is registered on a four digit resettable Electronic counter. With audio beep at every count. A fluorescent light provides uniform day light illumination

An analytic apparatus that employs a manometer to determine changes in the amount of gas produced or absorbed by a test sample kept at constant temperature in a flask of constant gas volume and is used especially in the study of cellular respiration and metabolism and of some enzymatic reactions (as fermentation)

Polished Stainless Steel tank, with capacity of 7 manometers a side. Digital temperature display with resolution of 0.1 deg. C. Temperature control to within +/-0.5 deg. C. Stainless Steel immersion heater. Stirrer for uniform temperature. Manometers mounted on graduated scale for reading pressure changes. Flask with center well & side flask attached to manometer. Oscillation of manometer approximately 90 rpm. Powder coated exterior, with wheels for easy mobility. Capacity 7 manometers, temperature range of 5 deg. C above ambient to 60 deg. C.

With Refrigeration System. Double walled, inside chamber stainless steel, outer body made of CRC/G.I. powder coated, Temp. Range from 10C to 60C controlled by Dual display microprocessor based Digital temp. indicator cum controller with 1C accuracy or better. Cooling system consist of high efficiency Kirloskar Make compressor with relevant accessories. Humidity range from atmospheric humidity to 95% controlled by Dual display Microprocessor based Digital Temp. Controller (Dry and Wet bulb method) with accuracy + 3% RH or better. Inner water tank made of stainless steel with ball cock valve. Front door has a full view glass observation window.

• Dual display digital temperature controller (For Both Wet & Dry) with printer interface facility (Centronic port) to print set value, actual values, date and time with variable print time interval (Without Printer) at extra cost.
• Microprocessor based direct RH digital controller.
• Circular chart recorder - Daily / Weekly type.
• Fluorescent tube light provided with 24 hours ON/OFF Programmable timer for Day /Night effect. Temp.range15 to 60C.at extra cost.
• Automatic Voltage Stabilizer.

We are the main supplier of this product.

Laboratory Jaw Crusher is designed to speed up the crushing of aggregate, ores, minerals, coal, coke, chemicals and other similar materials. Its compact and of rugged construction is advantageous for general laboratory or small pilot plant operations. Introduction

Two jaws of manganese steel are provided in the jaw crusher. The moveable jaw produces two blows for every revolution, thus reducing over sizing to a minimum. A combination of forward and downward and strokes with a rocking action exerts pressure on the coarse material to pass through the jaws. A hopper is provided at the top for feeding materials. The smooth jaws ensure a uniform product and easy cleaning is possible.

Oven is designed to determine the the effect of heat & air on asphaltic materials (thin film test).

The unit is heavily insulated & has a double glass built in door for view inside temperature is controlled at 163'deg C #1'deg C. by means of a calibrated PID based DIGITAL TEMP. INDICATOR CONTROLLER. inside platform rotated by external motor from 5 to 6 R.P.M. & 2 stainless steel pans are also provided to hold cups. (supplied without cups). Inner chamber made of stainless steel sheet of 304 grade & outer of mild steel sheet stoving painted. To work on 230 volts, AC 50 Hz supply.

For 150mm dia x 300mm high specimen. Consists of two frames for clamping to by means of five tightening screw with a hardened end tappered end. Two spacer hold the two frames in position. A pivot rod rests on pivot screws. A dial gauge, fixed to a bracket fitted to the top frame is used for taking deformation measurement. Supplied complete with dial gauge 0.002mm x 5mm in a nice wooden carrying case.

• EIE-1901, Ordinary
• EIE-1901, Digital

Body made of mild steel with attractive paint. Sloping at front cover with large magnifying lens. Built in large free illumination with black reflection free background. Complete with woulfheugel, counting plate.

Body made of mild steel with attractive paint. Sloping at front cover with large magnifying lens. Built in large free illumination with black reflection free background. Complete with woulfheugel, counting plate. Special pen type probe allows marking & counting simultaneously. Counting is registered on a four digit resettable Electronic counter. With audio beep at every count. A fluorescent light provides uniform day light illumination

An analytic apparatus that employs a manometer to determine changes in the amount of gas produced or absorbed by a test sample kept at constant temperature in a flask of constant gas volume and is used especially in the study of cellular respiration and metabolism and of some enzymatic reactions (as fermentation)

Polished Stainless Steel tank, with capacity of 7 manometers a side. Digital temperature display with resolution of 0.1 deg. C. Temperature control to within +/-0.5 deg. C. Stainless Steel immersion heater. Stirrer for uniform temperature. Manometers mounted on graduated scale for reading pressure changes. Flask with center well & side flask attached to manometer. Oscillation of manometer approximately 90 rpm. Powder coated exterior, with wheels for easy mobility. Capacity 7 manometers, temperature range of 5 deg. C above ambient to 60 deg. C.

With Refrigeration System. Double walled, inside chamber stainless steel, outer body made of CRC/G.I. powder coated, Temp. Range from 10C to 60C controlled by Dual display microprocessor based Digital temp. indicator cum controller with 1C accuracy or better. Cooling system consist of high efficiency Kirloskar Make compressor with relevant accessories. Humidity range from atmospheric humidity to 95% controlled by Dual display Microprocessor based Digital Temp. Controller (Dry and Wet bulb method) with accuracy + 3% RH or better. Inner water tank made of stainless steel with ball cock valve. Front door has a full view glass observation window.

• Dual display digital temperature controller (For Both Wet & Dry) with printer interface facility (Centronic port) to print set value, actual values, date and time with variable print time interval (Without Printer) at extra cost.
• Microprocessor based direct RH digital controller.
• Circular chart recorder - Daily / Weekly type.
• Fluorescent tube light provided with 24 hours ON/OFF Programmable timer for Day /Night effect. Temp.range15 to 60C.at extra cost.
• Automatic Voltage Stabilizer.