Eddy Cranes Engineers Pvt. Ltd.

Tardeo, Mumbai, Maharashtra

We offer Jib Cranes.STRUCTURE: The JIB crane will be fabricated from tested quality steel section with all welded construction. The structure will be designed as per ISS: 807-1976, for cranes. The complete JIB will be carried on ballroller thrust bearing in the top and bottom brackets to be fitted on the column to be provided by uscolumn to be provided by you. In case column is to be provided by us then the column will be fabricated from mild steel pipe. Suitable stiffeners will be provided on the column. A base plate of ample design will also be provided.

We offer Hot Cranes.The above Cranes & Chain Pulley Blocks will be manufactured in accordance with Class II Duty Specification as per relevant IS:807 & IS:3832. We shall be supplying INDEFMORISCHACK brand Chain Pulley Blocks only. The Chain Pulley Blocks shall confirm to IS:3832 and will carry IS stamp. Following parts will be made from Non-Ferrous Material (Phosphor Bronze Aluminum Bronze) for Hazardous Area Cranes :- Hand Chain Wheel.Load Chain Wheel.Hand Chain Guard.Ratchet Wheel.Rims of Traversing Wheel & Travelling Wheels.Pinions for LT Drive Mechanism. The hook will confirm to IS:3815 IS:15560 and will be hot dip galvanized in HOT Cranes for Hazardous Area Cranes.

We offer Single Grider Eot Crane.GENERAL DESIGN: The ELMECH crane will be designed in accordance with IS: 807-1976 code of practice for design manufacture, erection and testing (Structural position) of cranes and hoists and IS: 3177-1999 code of practice for design of overhead travelling cranes. In the design of components adequate factor of safety, as per relevant codes, shall be allowed. Impact fatigue, wear and stress concentration factors shall be taken into account whenever applicable.

We offer Double Grider Eot Cranes.ELMECH E.O.T Cranes are manufactured keeping in mind the following basic objectives. High quality : Minimum maintenance : Aesthetic Appearance. The above objective is achieved incorporating certain advanced technical feature described in the following pages. ELMECH cranes are designed keeping in mind Indian Standard Specification applicable to the crane, viz. IS:807-2006 Code of practice for design manufacture, erection and testing (structural position) of cranes and hoists. IS: 3177-1999. Code of practice for design of overhead travelling cranes and gantry cranes other than steel mill cranes. IS: 4137-1985. Code of practice of design of steel mill duty cranes. ELMECH double girder cranes are classified as class I, II, III & IV. These cranes are available in capacities ranging from 1 ton to 100 tons. STRUCTURAL ASSEMBLY: This basically comprises of two bridges girder fixed on two end carriages carried on forged steel wheels. In case of gantry cranes the two bridge girders are fixed on top of four gantry legs which in turn are carried on two under carriage provided with forged steel wheels. The bridge girders are fabricated from high quality steel plates forming a rectangular box section. Stiffening diaphragms are filled at regular intervals for the design to confirm to IS-807 and IS-800. The girders are so built that they have the required camber in the unloaded as required under Indian standard specifications.

We offer Flameproof Eot Cranes.ELMECH E.O.T. Cranes are manufactured keeping in mind the following basic objectives. 1. High Quality. 2. Minimum Maintenance. 3. Aesthetic Appearance. The above objectives are achieved incorporating certain advanced technical features described in the following pages. ELMECH Cranes are designed keeping in mind Indian Standard Specifications applicable to the Cranes, viz.