Ecosens Lighting Pvt. Ltd.

Rohini, Delhi

The LED lamp connected to the output of the IR Sensonr switch will trun ON when the hand pass over the IR switch within 10cm in distance, and will turn OFF when the hand pass over again. The sensor switch will turn ON or OFF with above repeatable steps

Function:The LED lamp connected to the output of the IR Sensonr switch will trun ON when the hand pass over the IR switch within 10cm in distance, and will turn OFF when the hand pass over again. The sensor switch will turn ON or OFF with above repeatable steps.
Detective Distance:5 to 10cm.

Battery-operated LED motion sensor lights that turn on and off automatically. Installs indoors or outdoors without wires to light up stairs, hallways, bathrooms, decks, RV's, boats and many other dark areas. Bright LED never needs replacing. Weatherproof design holds up through rain and snow. Motion sensor detects at 15 to activate light. Automatic shut off turns light off after 30 seconds.

Motion Detector Alarm with remote control. It utilizes human motion infrared rays as control signals, when human enter detection fields, it will start the sound system (alarm) to call attention that person enters detection fields; Turn on and off with the remote control. More than 100dB of sound. Four AA type batteries or an AC-DC adaptor to work. Wall mounting installation set included. It covers 6 to 8m space on an 110angle. it will give safety you never have for your family and travel ; Its using range is wide and its installation is easy.

SPECIFICATION FOR RECEIVING:

Battery: 41.5VDC Detection Range: 110

Detection Distance: max.8m(

The product can turn on or turn off light by automatically according to ambient-light. Ambient-temperature and humidity can't affect it. It is not only convenient but also practical; it can control the load working only at night. For instance road light, garden light etc. Its also known as Photocell Sensor, Light Sensor, Dusk to dawn sensor, Street light sensor, Day night Sensor, LDR Sensor. For street light. It has voltage protection.

The product can turn on or turn off light according to ambient-light; Ambient-temperature and humidity can't affect it. It is not only convenient but also practical, it can control the load working only at night. For instance road light, garden light etc. Its also known as Photocell Sensor, Light Sensor, Dusk to dawn sensor, Street light sensor, Day night Sensor, LDR Sensor.

The product adopts good sensitivity detector, integrated circuit. It gathers automatism, convenient safe, saving-energy and practical functions. It utilizes the infrared energy from human as control-signal source, it can start the load at once when one enters detection field. It can identify day and night automatically. It is easy to install and used widely.

The product can turn on or turn off light according to ambient-light; Ambient-temperature and humidity can't affect it. It is not only convenient but also practical, it can control the load working only at night. For instance road light, garden light etc. Its also known as Photocell Sensor, Light Sensor, Dusk to dawn sensor, Street light sensor, Day night Sensor, LDR Sensor.

Specification

• 1 Power source:220-240V/AC.
• 2.Rated Current: 6A.
• 3.Ambient Light:5-50LUX.
• 4.Application fields:Street lamp and road light, garden light etc.

Installation (see the figures)

• Switch off the power, connecting the wire as per the following figure.
• Please install the item with the correct orientation (see figure A) what shows in the metal bracket and according to the correct installation place with the enclosed inflated screws.

The sensor is an active motion detector, it emits high-frequency electro-magnetic wave ( 5.8GHz ) and receives their echo. The sensor detects the change in echo from even the slightest movement in its detection zone. A microprocessor then triggers the "switch light ON" command. Detection is possible through doors, panes of glass or thin walls.

The microwave sensors is according to the microwave doppler effect , it can be widely used in as automatic control switch, the security system, and Automatic video control system of ATM, as well as other automatic induction control area.

he Detection way has the below advantages compared with other as follows:

1. Non-contact Detection,

2. Suitable for bad environment, immune to temperature, humidity, noise, air, dust, Light^

3. RF interference ability,

4. Transmission power only 0.2 mW, It will not harm the human Body. Simple installation+ easy wiring.

We use appropriative micro processing integrator, not Only for high sensitivity and wide range of detection, and on very reliable work, error rate is Extremely low, It can stable working on the temperature range: 15 + 70 Celsius degrees.

Important: persons or objects moving towards the sensor are detected best!

NOTE: the high-frequency output of this sensor is < 10Mw- that is just one 100th of the transmission power of a mobile phone or the output of a microwave oven.