Each Midi sprinkler assembly consist of midi sprinkler with 0.3 1 mtr of 4mm tubing and 4mm connector which can go into the 12 or 16mm lateral. Special holding stakes to hold the assembly firmly also available as an optional item.

• Can be mounted on 12mm or 16mm drip laterals.
• Nozzles can be replaced
• Easy to dissemble and clean.
• Operates at low pressure
• Made from best quality polacetal resin to give maximum life.
• Durable and unbreakable
• Reasonable pricing.

Midisprinkler system is used particularly for plantation with a height of above 2ft. These are the only ones which give best uniformity at the ht of 2.5-3ft.Can be used for all types of crops like ginger, onion, shatavari, vegetables & nurseries.Very economical and effective for stevia, etc.

Each Micro sprinkler assembly consist of microsprayer with 0.3 1 mtr of 4mm tubing and 4mm connector which can go into the 12 or 16mm lateral. Special holding stakes to hold the assembly firmly also available as an optional item.

• Can be mounted on 12mm or 16mm drip laterals.
• Nozzles can be replaced.
• Easy to dissemble and clean.
• Maximum area covered at minimum pressure.
• Uniform wetting of entire area.
• Made from best quality polyacetal resin to give maximum life.
• Reasonable pricing.

Microsprinkler systems are used where complete area is to be covered perfectly without causing any harm to the crop/plants.

This is best suitable for all crops where it is necessary to cover entire area, like ginger, safed mush, onions, etc. and all vegetable plantations and nurseries.

Each Mni sprinkler assembly consist of mini sprinkler with an in-built stake, which can be attached to 12 or 16mm lateral. Also comes without stake, for which mini sprinkler can be belted to an external wooden/ metal stake of any suitable height.

• Can be connected to 12mm or 16mm drip laterals.
• Easy to dissemble and clean.
• Operates at low pressure
• Uniform wetting
• Cheaper to install than the conventional sprinkler system
• Made from best quality polyacetal resin to give maximum life.
• Durable and unbreakable
• More durable than the microsprinkler systems but need 2kg/cm2 pressure as against 1.2 kgs/cms2 required for microsprinklers
• Reasonable pricing.

Minisprinkler systemsare used where complete area is to be covered perfectly without causing any harm to the crop/plants.This is best suitable for all crops where it is necessaryto cover entire area, likeginger, safedmusli, onions and medicinal plants and all vegetable plantations and nurseries.

Each Midi sprinkler assembly consist of midi sprinkler with 0.3 1 mtr of 4mm tubing and 4mm connector which can go into the 12 or 16mm lateral. Special holding stakes to hold the assembly firmly also available as an optional item.

• Can be mounted on 12mm or 16mm drip laterals.
• Nozzles can be replaced
• Easy to dissemble and clean.
• Operates at low pressure
• Made from best quality polacetal resin to give maximum life.
• Durable and unbreakable
• Reasonable pricing.

Midisprinkler system is used particularly for plantation with a height of above 2ft. These are the only ones which give best uniformity at the ht of 2.5-3ft.Can be used for all types of crops like ginger, onion, shatavari, vegetables & nurseries.Very economical and effective for stevia, etc.

Each Micro sprinkler assembly consist of microsprayer with 0.3 1 mtr of 4mm tubing and 4mm connector which can go into the 12 or 16mm lateral. Special holding stakes to hold the assembly firmly also available as an optional item.

• Can be mounted on 12mm or 16mm drip laterals.
• Nozzles can be replaced.
• Easy to dissemble and clean.
• Maximum area covered at minimum pressure.
• Uniform wetting of entire area.
• Made from best quality polyacetal resin to give maximum life.
• Reasonable pricing.

Microsprinkler systems are used where complete area is to be covered perfectly without causing any harm to the crop/plants.

This is best suitable for all crops where it is necessary to cover entire area, like ginger, safed mush, onions, etc. and all vegetable plantations and nurseries.

Each Mni sprinkler assembly consist of mini sprinkler with an in-built stake, which can be attached to 12 or 16mm lateral. Also comes without stake, for which mini sprinkler can be belted to an external wooden/ metal stake of any suitable height.

• Can be connected to 12mm or 16mm drip laterals.
• Easy to dissemble and clean.
• Operates at low pressure
• Uniform wetting
• Cheaper to install than the conventional sprinkler system
• Made from best quality polyacetal resin to give maximum life.
• Durable and unbreakable
• More durable than the microsprinkler systems but need 2kg/cm2 pressure as against 1.2 kgs/cms2 required for microsprinklers
• Reasonable pricing.

Minisprinkler systemsare used where complete area is to be covered perfectly without causing any harm to the crop/plants.This is best suitable for all crops where it is necessaryto cover entire area, likeginger, safedmusli, onions and medicinal plants and all vegetable plantations and nurseries.