East India Company

Ramnagar, Roorkee, Uttarakhand

We bring forth Cobb Sizing Tester that is designed to determine the water absorbency of paper and board. This range of Cobb Sizing Tester is highly popular among clients for its robust construction and precise engineering. Cobb Sizing Tester can be obtained by clients at affordable rates. Specifications

• Conforms to International Standard : TAPPI T 441-45 and ASTM D 2045-647
• Convenient Sample Clamping
• Test Cylinder Made of Brass About 8 Cm High, With an Internal Area 100 Cm
• Stainless Steel Coach Roll Width 210 Mm and Weight 10 kg, 05 Kg
• Level Indication on inside of Cylinder for 100 Ml water
• Template size 6 inch / 6 inch for paper sample

We bring forth hydraulic bursting strength tester that is intended for measuring the bursting strength of paper strong paperboard by submitting it to an increasing uniform hydraulic pressure. The hydraulic bursting strength tester has the qualitative features of reliability, high accuracy and repeatability by incorporating electronics. specifications

• push switch operates 1/4 horsepower motor, single phase 220/250 volts ac
• produce uniform increasing pressure of a rate of 170 ml/min 5 ml/min
• international standards : bs 3137, iso2759, tappi, t807, om-82.t810, om-80 etc.
• pressure increasing speed : 170 ml/min 5 ml/min
• standard rubber diaphragm : 80 mm / 2.3 mm 0.2 mm thick
• range of pressure gauge : 0 7 , 0-10, 0-15, 0-21, 0-28, 0-35 , 0 -50 kg/cm

We offer the esteemed clients a superlative quality digital gsm tester that is intended for measuring the basis weight very rapidly and accurately in grams per meter (gsm) sq. By weighing a small test sample of a certain dimension. This range of digital gsm tester has plastic casing for high accuracy and measurement.

We provide the clients Digital Stiffness Tester that is intended for measuring the stiffness and resolution quantities of paper card-board, plastic light metallic sheet spring wire with high sensitivity and precision accuracy. The digital stiffness tester is offered to the clients at reasonable rates. We are renowned as well-known digital stiffness tester manufacturer and exporter. comply with the following standards

• technical association of paper and pup industry tappi t489 m60
• american society for testing and material astm-0747-61t
• physical and chemical standard committee technical section
• canadian pulp and paper association standard d.28 p
• japanese industrial standard jisp8125

connections

• power supply 220/250 v, l-phase 50 hz 10 va

We are engaged in bringing to the clients superlative quality Fluff Tester. This range of Fluff Tester is extensively used for testing the loose fibers (fluff) in test specimen after simulating the problem in printing press. These Fluff Testers are widely acclaimed by the clients for distinctive features and are offered to the clients at competitive prices. Advantages

• Excellent performance
• Long functional life
• Robust construction
• Economical rates

We are instrumental in bringing to clients superior quality digital bursting strength tester. This range of digital bursting strength tester has the qualitative features of high performance, supreme quality and longer service life. We offer the digital bursting strength at market leading rates to the clients. salient features

• standards : appita /as 1301/ 403 , scan p24 , tappi t403
• bursting strength : 1000 / gsm
• imported pressure sensors are used for best performance
• machine linked with computer via rs 232 port
• fully automatic pneumatic clamping, uniform pressure as per standards
• lcd module displays bursting strength, bursting factor, bursting index
• imported geared ac motor , over load & over travel protection facility
• guides the user through all steps of program selection, thus minimizing the risk of human error
• fully software configurable machine, membrane keyboard for parameter selection i.e gsm etc.
• the result are available on 20*4 lines glowing imported alphanumeric lcd module
• the bursting tester is easily linked with laboratory computer
• results stored in hard disk for future use
• connection to jsr auto line data acquisition workstation via rs. 232c/usb

ranges of digital bursting strength tester includes

• for paper, paper board & similar material 0- 7 , 0-14 , 0-21 kg/cm2
• for strong paper & corrugated board 0-10 , 0-20 , 0-30 , 0-70 kg/cm2

We are engaged in manufacturing and exporting a wide range of supreme quality folding endurance tester. The folding endurance tester is used to determine the folding endurance of all kinds of paper card board, foil and film. The folding endurance tester can be acquired by clients at competitive prices. advantages

• compact functional unit
• cost-effective
• easy to operate
• high accuracy
• sturdily constructed
• user-friendly

specifications

• folding clamps are made of stainless steel for a strip width of 15 mm.
• loading clamps of dead weight type giving a constant load during a test.
• standard load according to scan and iso is 7.85 n (corresponding to a weight of 800 grams.
• folding angle 3120
• folding speed 200 double fold per minute.
• dimension of test strip 15 x 100 mm.
• five digit counter with zero setting. The counter stops automatically and disengaged after rupture of the specimen.
• power supply 220/250 volts a. C. Single phase 50 hz approx.200 va.

.

We are involved in the manufacturing and exporting of optimum quality taber stiffness tester. This range of taber stiffness tester is intended for measuring the stiffness and resolution quantities of paper card-board, plastic light metallic sheet spring wire with high sensitivity and precision accuracy. The taber stiffness tester is brought to clients at affordable rates. comply with following international standards

• technical association of paper and pup industry tappi t489 m60
• american society for testing and material astm-0747-61t
• physical and chemical standard committee technical section
• canadian pulp and paper association standard d.28 p
• japanese industrial standard jisp8125

connections

• power supply 220/250 v, l-phase 50 hz 10 va.

We bring forth superior quality tearing resistance tester to the esteemed clients across the globe. This range of tearing resistance tester is intended for measuring the tearing resistance of paper, films and other sheets from the time tearing off starts to the moment a fixed length is torn off by the loss of potential energy of the fan shaped pendulum. The tearing resistance tester conforms to international standard like tappi, scan, iso standard. range of tearing resistance tester includes

• tearing resistance tester (elemendorf type)
• electronic tearing resistance tester (elemendorf type, micro controller based )

specifications

• tearing resistance tester is easy to operate and has a high accuracy level 1% of readout value.
• the complete pendulum is easily interchangeable after loosening the curled nut on the bearing shaft and, the whole pendulum assembly can be removed from the stand.
• skf frictionless bearing assembly is made of stainless steel.
• sample clamp are made of stainless steel .pivoted knife are made of hardened carbon steel.
• specimen size : 62.0 mm 0.2 mm long and 50 mm 2 mm width .scalegraduation 0-100.
• interchangeable pendulum having the following capacity
• light pendulum : 8000 mn
• medium pendulum : 16000 mn
• heavy pendulum : 32000 mn
• dimensions : approx. 500 mm x 200 mm x 400 mm
• net weight of three pendulum tester : approx. 22 kg
• direct display of tearing strength, with computer connectivity

We are instrumental in providing clients with supreme quality paper brightness tester. The paper brightness tester has been developed to meet the paper industry's needs for accurate and reliable measurement of brightness and opacity. We provide the paper brightness tester at competitive prices to clients. range of paper brightness tester includes

• digital brightness, opacity tester (iso / technibrite type)
• computerized brightness, opacity tester (iso / technibrite type)
• digital brightness & opacity tester (photovolt type)

salient features

• superior performance
• robust construction
• low maintenance
• cost effective

specifications

• integrating spheres diameter : 15 cm.
• total area of aperture in sphere : less than 7.5 % of the sphere area.
• sample aperture : circular with 34 mm diameter.
• sample area of view : circular with 30 mm diameter.
• accuracy of iso standards 0.2%.
• max photometric linearity error 0.1%
• power supply 230 5% volts, 50va, 50 hz.

.

We provide the best quality paper porosity tester that is a standard instrument for measuring the smoothness, porosity, air permeability of paper and paper products. This range of paper porosity tester conforms to international standards and is provided to the clients at market leading rates. range of paper porosity tester includes

• smoothness and porosity tester (bendtsen type)
• electronic smoothness & porosity tester (bendtsen type) (micro controller based)
• smoothness porosity & softness tester (gurley type)

attributes

• easy to operate
• maintenance free
• longer working life
• high performance

specifications

• inner cylinder weight (pressure) : 567 1 gram.
• effective area for porosity : 665.16 mm (0.1 in )22
• incorporating electronic digital timer with contact free frictionless operation.
• the timer has eight measuring ranges 25, 50, 100, 150, 200, 250 300 and 2 350 cm .
• the digital timer indicates the time in second to one decimal place.
• the timer starts automatically when the zero line of the graduated inner cylinder passes the top surface of the outer cylinder and stops automatically as soon as the predetermined settled volume of air has passed through the sample.
• power supply 230 10% volts, single phase, 50 hz, 15 watts.
• dimensions : instrument : app. 20x30x40 cm3
• electronic digital timer : app. 20 x 20 x 10 cm 3

.

We bring forth a wide range of supreme quality digital tensile strength tester used for efficient determination of tensile strength, stretch, breaking length of paper & board. The digital tensile strength tester is highly acclaimed for durability, effectual functioning and user-friendly features. We offer the digital tensile strength tester at market leading rates to clients. advantages

• compact functional unit
• low cost
• quick and easy to operate
• high accuracy
• robust construction
• reliable & user-friendly
• economical and trouble free

attributes

• indigenous dc drive, over load & over travel protection facility
• guides the user through all steps of program selection, thus minimize the risk of human error
• fully software configurable machine, membrane keyboard for parameter selection i.e sample length, gsm etc
• results displayed on 4 line glowing imported alphanumeric lcd
• can be easily linked with laboratory computer
• results can be stored in hard disk for future use
• strip cutter is for cutting strips of 15 mm * 300 mm length
• window based software with load elongation curve & data storage