Our Products
Spray Nozzles
2 Products availablePipe Nozzles
2 Products availableGarden Watering Tools
1 Products availableMachines And Equipments
1 Products availableWe offer the best product range of Flow Control Unit, Sprinklers ES - 65PC, Sprinklers ES - 40PC, Solanoid Box and headers.
Flow control unit it is been manufactured as per system requirement of Dry Fog Dust Suppression. It is used to Start / Stop flow of water and air for Dry Fog Dust Suppression. It consists of Solenoid Valve, Pressure Regulator Valve, Pressure Regulator, Air Filter, Pressure Switch, Stainless Steel Pipes and Pipe Fittings.
The Sprinkling From one Nozzle in one Direction is smooth & Reaching Far, Water Drops Are Less influenced By Wind. The Most Suitable for spraying in a Large Area For Dust Suppression System. The Sprinkler is suitable for Dust Suppression System stockpile Area & Having Trajectory Angle of 4. Deg. Which Covers full Height of stockpile. The Sprinkler Rotates Smoothly step by step like the arm of a clock.
The material of all components of The sprinklers are Corrosion & Pressure Resistant.
The Sprinkler Sprinkling From one Nozzle in one Direction is smooth & Reaching Far, Water Drops Are Less Influenced By Wind. The Most Suitable for Spraying in a Large Area for Dust Suppression System. The Sprinkler is Suitable for Dust suppression System for stock pile Area & Having Trajectory Angle of 40 Deg. Which Covers Full Height of Stockpile. The Sprinkler Rotates Smoothly step by step like the arm of clock. The material of all components of The sprinklers are Corrosion & Pressure Resistant.
The spray housing with its filter assembly, has been develope to protect the spary lets against flying rocks and other external sources of damage. An extra large filter used having an approx 10 times laeger than normally required for sprays to increase the operating time between cleaning. Housing: Die Cast Aluminium Alloy. Plug: Connector, Nut, Tipholder, Etc : S.S. 316 Filter: Brass Discharge Rate: Nozzles Are Avaiable Having Discharge : 1 To 8 L.P.M. At 2.5 To At 5 Kg/Cm2 Pressure As Per Requirement. |
The solenoid box controls the flow of solution/water to the spray each unit is supplied with a inlet filter, solenoid valve unions are so that the filter and solenoid valve assembly can be removed easily for maintenance. A solenoid box is provided with a hinged door for maintenance. Solenoid box cabinet is fabricated from 2mm m.s. plate with 2 coat of paint, box is complete with mounting lugs, so that it can be bolted to a wall or structure adjacent to the spry. Solenoid valve: Servo operated, normally closed, energised to open. Suitable to work on 100v/220v, 50c/s, a.c. supply or 24 v dc or as per system requirement. Filter: The 50 mesh insert can be removed for cleaning or replacement. Pipes & fittings: As per is 1239 I II Solenoid box are available for 25, 32, 40, 50, & 65 mm nominal bore pipe size.
BILL OF MATERIAL |
SOLENIOD VALVE ‘Y’ TYPE STRAINER UNION PIPE – 2 PIPE – 3 CHECK NUT CABINER TERMINAL BOX U CLAMP |
SR. No | SIZE | A | B | C | D | E |
1 | 15 | 475 | 320 | 160 | 360 | 275 |
2 | 20 | 475 | 320 | 160 | 360 | 275 |
3 | 25 | 475 | 320 | 160 | 360 | 275 |
4 | 32 | 540 | 400 | 220 | 440 | 350 |
5 | 40 | 540 | 400 | 220 | 440 | 350 |
6 | 50 | 650 | 450 | 220 | 490 | 350 |
7 | 65 | 700 | 500 | 220 | 540 | 350 |
Spray header for plain water D.S. system are manufactured as per requirement from ERW Pipe & Tested for hydraulic pressure for functional requirements Spray header for Dry Fog D.S. system are manufactured as per requirement from SS-304 Pipe & Tested for & Pneumatic hydraulic pressure for functional requirements