GST : 24AAHFE6831G2ZJ
Verified
Write a Review
Our Product / Services
Electric Fittings And Components
2 Products availableVoltage Stabilizers & Power Controllers
2 Products availableBrass & Copper Products
2 Products availableIndustrial Chemicals
2 Products availableChemical Machine
1 Products availableEarthing Equipment
1 Products availableIndustrial Designing, Plant & Equipment Installation
1 Services availableOur Complete range of products are Smart Earth Conductivity Improvement Material and Earthing Grounding System.
1. Lightning Arrestor:
Lightning is natural phenomenon and it can damage industrial premises and infrastructures
And can cause fatal accident for human beings working in the premises. E-Link Lightning Arrestors are Heavy Duty made from Low Carbon Steel, and subjected to copper bonding. Copper Bonding is carried out by process of high quality molecularly bonding pure electrolytic copper(99.9%) on the surface of the arrestor. Copper coating is 250 micron thick, which makes Lightning Arrestor unique in current handling during lightning strike. Four ancillary spikes and one main spike are provided for effectively taping of lightning current to earth. It protects building against lightning damages.
E-Link has developed special Back Filling Material as Earth Conductivity improvement Material (ECIM) which is filled around the Earth Electrode which enhances the soil conductivity in excellent way It swells considerably when mixed with water and remains water for long time. This improves bonding between soil and Earth Electrode which is crucial part in Earthing. It maintains moisture surrounding to the Earth Electrode. There is no need to recharge the earth pit in normal type of soil. Unlike salt, ECIM is insoluble in water and hence does not wash out during rain. It is corrosion resistive. ECIM is made from various minerals extracted from mother earth and hence it is soil and environment friendly. E-Link manufactures various types of ECIM for catering the need of various types of performance.
Our in-depth knowledge and industrial expertise has enabled us to emerge as a reputed organization engaged in offering Ground Conductivity Improvement Material. It is a superior conductive material that solves your toughest grounding problems. This can be used in areas of poor conductivity, such as rocky ground, mountain tops and sandy soil. It dramatically reduces earth resistance and impedance measurements. Ground Conductivity Improvement Material can reduce the size of the grounding system where conventional methods are unsatisfactory.
Features:
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union, ,
Packaging Details : Standard Packaging also special packing for export.
Delivery Time : 2 to 3 days
We introduce our new product which is leader position in backfill compound manufacturing with 0.12 Oham/meter resistivity which is very good for earthing conductivity improvement.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : standard
Delivery Time : 2 days
Lightning is natural phenomenon and it can damage industrial premises and infrastructures
And can cause fatal accident for human beings working in the premises. E-Link Lightning Arrestors are Heavy Duty made from Low Carbon Steel, and subjected to copper bonding. Copper Bonding is carried out by process of high quality molecularly bonding pure electrolytic copper(99.9%) on the surface of the arrestor. Copper coating is 250 micron thick, which makes Lightning Arrestor unique in current handling during lightning strike. Four ancillary spikes and one main spike are provided for effectively taping of lightning current to earth. It protects building against lightning damages.
Lightning is natural phenomenon and it can damage industrial premises and infrastructures
And can cause fatal accident for human beings working in the premises. E-Link Lightning Arrestors are Heavy Duty made from Low Carbon Steel, and subjected to copper bonding. Copper Bonding is carried out by process of high quality molecularly bonding pure electrolytic copper(99.9%) on the surface of the arrestor. Copper coating is 250 micron thick, which makes Lightning Arrestor unique in current handling during lightning strike. Four ancillary spikes and one main spike are provided for effectively taping of lightning current to earth. It protects building against lightning damages.
We are manufacturing Multi point charge collector which is used for lightning protection to our house, building, warehouse, Company Shedes, etc. Its work is collect lightning from air and ground it with help of low resistance conducting path of earth.
This 'E-Link Earthing Chamber' Earth housing pit is manufactured from heavy high-grade polyproplene thermoplastic polymer for high strength & stress levels to absorb a maximum load of 5000 kg. This specially designed earth chamber withstand sunlight and cold weather damage and is non-brittle. This Earthing Chamber has light weight so it can be easy handled, stored and transported which increasing installation efficiency. Termination area is increased by 100% due to simple locking of two units together, allowingdeeper earth electrode connections to be made and reducing the effects from harmful voltage gradients.
E-Link Copper Bonded rod type earthing electrode is constructed using steel core with low carbon content. The steel rods are subjected to copper bonding of 99.9% pure electrolytic copper. The manufacturing process adheres to the requirement of national as well as international standards. The perfectly bonded rod lasts longer and provides lowest resistance to the ground.
We also provided stainless steel, hot dip galvanised rods and pure copper rods as per requirement of the client or the projects.
1. Dual Electrode Technology Based Earthing Electrode:
E-Link offers unique Dual Electrode Technology Based Advanced Earthing Electrodes. It mainly consists of Primary electrode which is directly connected to electrical equipment and the Secondary Electrode, also known as outer Electrode which is in direct contact with Earth. We use B Class Low carbon steel pipe as outer electrode & low carbon steel strip as inner or primary electrode. Both the electrodes are subjected to hot dip galvanization or copper electroplating. Special highly conductive material (SHCM), which is non corrosive, is pressure filled between the outer and Inner electrode. SHCM safeguards the Electrode from getting corroded over a long period of time inside the soil. Thus even if the Outer Electrodes get corroded after some years, Inner Electrode remains intact which increases the reliability and life of Earthing System in years.
It is very important to check the earthing after its installation. If you are looking for assistance to do that, simply contact E-Link Enterprises. Located in Surat (Gujarat, India), our company is involved in offering earthing testing services at market leading prices. For rendering the services with perfection we have hired a team of qualified professionals, who are backed by years of experience and have an expertise in this job. They test the earthing on several parameters. So, get in touch with us now.
E-Link Copper Bonded rod type earthing electrode is constructed using steel core with low carbon content. The steel rods are subjected to copper bonding of 99.9% pure electrolytic copper. The manufacturing process adheres to the requirement of national as well as international standards. The perfectly bonded rod lasts longer and provides lowest resistance to the ground.
We also provided stainless steel, hot dip galvanised rods and pure copper rods as per requirement of the client or the projects.
1. Dual Electrode Technology Based Earthing Electrode:
E-Link offers unique Dual Electrode Technology Based Advanced Earthing Electrodes. It mainly consists of Primary electrode which is directly connected to electrical equipment and the Secondary Electrode, also known as outer Electrode which is in direct contact with Earth. We use B Class Low carbon steel pipe as outer electrode & low carbon steel strip as inner or primary electrode. Both the electrodes are subjected to hot dip galvanization or copper electroplating. Special highly conductive material (SHCM), which is non corrosive, is pressure filled between the outer and Inner electrode. SHCM safeguards the Electrode from getting corroded over a long period of time inside the soil. Thus even if the Outer Electrodes get corroded after some years, Inner Electrode remains intact which increases the reliability and life of Earthing System in years.
1. Copper bonded Rod:
E-Link Copper Bonded rod type earthing electrode is constructed using steel core with low carbon content. The steel rods are subjected to copper bonding of 99.9% pure electrolytic copper. The manufacturing process adheres to the requirement of national as well as international standards. The perfectly bonded rod lasts longer and provides lowest resistance to the ground.
We also provided stainless steel, hot dip galvanised rods and pure copper rods as per requirement of the client or the projects.
2.
1. Dual Electrode Technology Based Earthing Electrode:
E-Link offers unique Dual Electrode Technology Based Advanced Earthing Electrodes. It mainly consists of Primary electrode which is directly connected to electrical equipment and the Secondary Electrode, also known as outer Electrode which is in direct contact with Earth. We use B Class Low carbon steel pipe as outer electrode & low carbon steel strip as inner or primary electrode. Both the electrodes are subjected to hot dip galvanization or copper electroplating. Special highly conductive material (SHCM), which is non corrosive, is pressure filled between the outer and Inner electrode. SHCM safeguards the Electrode from getting corroded over a long period of time inside the soil. Thus even if the Outer Electrodes get corroded after some years, Inner Electrode remains intact which increases the reliability and life of Earthing System in years.
2. Copper bonded Rod:
E-Link Copper Bonded rod type earthing electrode is constructed using steel core with low carbon content. The steel rods are subjected to copper bonding of 99.9% pure electrolytic copper. The manufacturing process adheres to the requirement of national as well as international standards. The perfectly bonded rod lasts longer and provides lowest resistance to the ground.
We also provided stainless steel, hot dip galvanised rods and pure copper rods as per requirement of the client or the projects.
Technical Specification
| Model No. | Length | Electrode Data | |
| Outer Pipe |
Inner Pipe |
||
| Galvenised Model | |||
| ELDGP - 502P | 2 MTR. | 48 mm DIA B Calss Pipe |
26 mm DIA A Calss Pipe |
| ELDGP - 503P | 3 MTR. | ||
| ELDGP - 602P | 2 MTR. | 60 mm DIA B Calss Pipe |
33 mm DIA A Calss Pipe |
| ELDGP - 603P | 3 MTR. | ||
| ELDGP - 802P | 2 MTR. | 77 mm DIA B Calss Pipe |
42 mm DIA A Calss Pipe |
| ELDGP - 803P | 3 MTR. | ||
| Cu Coated 100 Micron Model | |||
| ELDCP1 - 502P | 2 MTR. | 48 mm DIA B Calss Pipe |
26 mm DIA A Calss Pipe |
| ELDCP1 - 503P | 3 MTR. | ||
| ELDCP1 - 802P | 2 MTR. | 77 mm DIA B Calss Pipe |
42 mm DIA A Calss Pipe |
| ELDCP1 - 803P | 3 MTR. | ||
| Cu Coated 250 Micron Model | |||
| ELDCP2 - 502P | 2 MTR. | 48 mm DIA B Calss Pipe |
26 mm DIA A Calss Pipe |
| ELDCP2 - 503P | 3 MTR. | ||
| ELDCP2 - 802P | 2 MTR. | 77 mm DIA B Calss Pipe |
42 mm DIA A Calss Pipe |
| ELDCP2 - 803P | 3 MTR. | ||
1. Dual Electrode Technology Based Earthing Electrode:
E-Link offers unique Dual Electrode Technology Based Advanced Earthing Electrodes. It mainly consists of Primary electrode which is directly connected to electrical equipment and the Secondary Electrode, also known as outer Electrode which is in direct contact with Earth. We use B Class Low carbon steel pipe as outer electrode & low carbon steel strip as inner or primary electrode. Both the electrodes are subjected to hot dip galvanization or copper electroplating. Special highly conductive material (SHCM), which is non corrosive, is pressure filled between the outer and Inner electrode. SHCM safeguards the Electrode from getting corroded over a long period of time inside the soil. Thus even if the Outer Electrodes get corroded after some years, Inner Electrode remains intact which increases the reliability and life of Earthing System in years.
1. Copper bonded Rod:
E-Link Copper Bonded rod type earthing electrode is constructed using steel core with low carbon content. The steel rods are subjected to copper bonding of 99.9% pure electrolytic copper. The manufacturing process adheres to the requirement of national as well as international standards. The perfectly bonded rod lasts longer and provides lowest resistance to the ground.
We also provided stainless steel, hot dip galvanised rods and pure copper rods as per requirement of the client or the projects.
Technical Specification
| Model No. | Length | Electrode Data | |
| Outer Pipe |
Inner Pipe |
||
| Galvenised Model | |||
| ELDGP - 502P | 2 MTR. | 48 mm DIA B Class Pipe |
26 mm DIA A Class Pipe |
| ELDGP - 503P | 3 MTR. | ||
| ELDGP - 602P | 2 MTR. | 60 mm DIA B Class Pipe |
33 mm DIA A Class Pipe |
| ELDGP - 603P | 3 MTR. | ||
| ELDGP - 802P | 2 MTR. | 77 mm DIA B Class Pipe |
42 mm DIA A Class Pipe |
| ELDGP - 803P | 3 MTR. | ||
| Cu Coated 100 Micron Model | |||
| ELDCP1 - 502P | 2 MTR. | 48 mm DIA B Class Pipe |
26 mm DIA A Class Pipe |
| ELDCP1 - 503P | 3 MTR. | ||
| ELDCP1 - 802P | 2 MTR. | 77 mm DIA B Class Pipe |
42 mm DIA A Class Pipe |
| ELDCP1 - 803P | 3 MTR. | ||
| Cu Coated 250 Micron Model | |||
| ELDCP2 - 502P | 2 MTR. | 48 mm DIA B Class Pipe |
26 mm DIA A Class Pipe |
| ELDCP2 - 503P | 3 MTR. | ||
| ELDCP2 - 802P | 2 MTR. | 77 mm DIA B Class Pipe |
42 mm DIA A Class Pipe |
| ELDCP2 - 803P | 3 MTR. | ||
E-Link Copper Bonded Rod type earthing electrode is constructed using steel core with Low Carbon content. The steel rods are subjected to copper bonding of 99.9% pure electrolytic Copper. The manufacturing process adheres to the requirement of National as well as Internationalstandards. The perfectly bonded rod lasts longer and provides Resistance to the ground.
We also provided stainless steel, hot dip galvanised rods and pure copper rods as per requirement of the client or the projects.
Technical Specification
| Model No. |
Length MM |
Dia MM |
|---|---|---|
| ELRC 141 | 1000 | 14 MM |
| ELRC 142 | 2000 | 14 MM |
| ELRC 143 | 3000 | 14 MM |
| ELRC 161 | 1000 | 16 MM |
| ELRC 162 | 2000 | 16 MM |
| ELRC 163 | 3000 | 16 MM |
| ELRC 171 | 1000 | 17 MM |
| ELRC 172 | 2000 | 17 MM |
| ELRC 173 | 3000 | 17 MM |
| ELRC 191 | 1000 | 19 MM |
| ELRC 192 | 2000 | 19 MM |
| ELRC 193 | 3000 | 19 MM |
| ELRC 251 | 1000 | 25 MM |
| ELRC 252 | 2000 | 25 MM |
| ELRC 253 | 3000 | 25 MM |
| ELRC 321 | 1000 | 32 MM |
| ELRC 322 | 2000 | 32 MM |
| ELRC 323 | 3000 | 32 MM |
| ELRC 381 | 1000 | 38 MM |
| ELRC 382 | 2000 | 38 MM |
| ELRC 383 | 3000 | 38 MM |
1. Dual Electrode Technology Based Earthing Electrode:
E-Link offers unique Dual Electrode Technology Based Advanced Earthing Electrodes. It mainly consists of Primary electrode which is directly connected to electrical equipment and the Secondary Electrode, also known as outer Electrode which is in direct contact with Earth. We use B Class Low carbon steel pipe as outer electrode & low carbon steel strip as inner or primary electrode. Both the electrodes are subjected to hot dip galvanization or copper electroplating. Special highly conductive material (SHCM), which is non corrosive, is pressure filled between the outer and Inner electrode. SHCM safeguards the Electrode from getting corroded over a long period of time inside the soil. Thus even if the Outer Electrodes get corroded after some years, Inner Electrode remains intact which increases the reliability and life of Earthing System in years.
Technical Specification
| Model No. | Length | Electrode Data | |
| Outer Pipe |
Inner Strip |
||
| Galvenised Model | |||
| ELDGS - 501 | 1 MTR. | 48 mm DIA 3.2 MM Thickness |
32*6 |
| ELDGS - 502 | 2 MTR. | ||
| ELDGS - 503 | 3 MTR. | ||
| ELDGS - 802 | 2 MTR. | 77 mm DIA 3.6 MM Thickness |
50*6 |
| ELDGS - 803 | 3 MTR. | ||
E-Link Enterprises is a Surat (Gujarat, India) based company that is engaged in offering earthing installation services. For rendering these services we use high-quality raw materials that make them reliable. We render this service for different types of properties like residential and commercial. The service is rendered by our team of skilled professionals, who are backed by years of experience in this industry. They make sure that the service is rendered with perfection and in accordance with the set industrial standards. So, contact us now.
1. Hot Dip Galvanised Iron Solid Rod:
E-Link Hot Dip Galvanised Iron Solid rod type earthing electrode is constructed using steel core with low carbon content.The manufacturing process adheres to the requirement of national as well as international standards. The perfectly bonded rod lasts longer and provides lowest resistance to the ground.
We also provided stainless steel, copper bonded rods and pure copper rods as per requirement of the client or the projects.
Lightning rod with Electronic Early Streamer Emission System : When the electrical field increases, the electronic ESE system ionizes the air particles around the lightning rod. It produces an upward streamer emission that attracts and captures the discharge. They have been designed to reduce the time of the electro -atmospheric discharge, increasing t (s). It uses the latest generation of the electronic technology.
Lightning rod with Non - Electronic Early Streamer Emission System : The principle of operation of INGESCO PDC is based on emitting a current of ionized particles that takes place by the difference of potential between the load of the exciter assembly and the load of the end and the joint deflection assembly plate. It produces an upward streamer emission that attracts and captures the discharge over the protected building or facility to take it to the ground.
Ait Terminals PDC Electronic Model
| Model No. | Protection Radius | |||
| Level 1 | Level 2 | Level 3 | Level 4 | |
| PDC E 15 | 35 | 43 | 54 | 63 |
| PDC E 30 | 50 | 59 | 70 | 81 |
| PDC E 45 | 65 | 74 | 86 | 97 |
| PDC E 60 | 80 | 89 | 102 | 113 |
Air Terminals PDC Non Electronic Model
| Model No. | Protection Radius | |||
| Level 1 | Level 2 | Level 3 | Level 4 | |
| PDC 3.1 | 35 | 43 | 54 | 63 |
| PDC 3.3 | 45 | 54 | 65 | 75 |
| PDC 4.3 | 54 | 63 | 74 | 85 |
| PDC 5.3 | 63 | 72 | 84 | 95 |
| PDC 6.3 | 74 | 83 | 95 | 106 |
| PDC 6.4 | 80 | 89 | 102 | 113 |
Mr. Vicky Makawana (E-Link Enterprise)
17, 315 Shastri Nagar, Khatodara Colony, Salabatpura, Surat, Gujarat - 395002, India
Share us via
View Contact Number 
