Dynemech Systems Pvt Ltd

Sonipat, Haryana

• MaterialHigh Grade Synthetic Composite Material
• TypeVibration Insulation Plates
• FeatureDifferent Load Capacities, Various Natural Frequencies, Resistant To Water, Oils, Fuels
• Brand NameDynemech
• Thicknesses2mm, 8mm, 15mm, 20mm, 25mm, 65mm

Dynemech offers ANTI VIBRATION SHEETS made from high grade synthetic composite material. These sheets have different load capacities and are available in different natural frequencies to suit various industrial applications. These are resistant to water, oils, lubricating oils, fuels etc. used in the shop floor. Each sheet has defined stress value and can be placed directly under the machine as per the weight of the machine and no. of mounting positions. These plates will not deform plastically, if the weight of machine does not exceed maximum load value of the insulation plates. The available thicknesses are 2mm, 8mm, 15mm, 20mm, 25mm and 65mm.

• MaterialVarious Materials
• Brand NameDynemech
• FeaturePrecision Leveling, Adjustable Bolt, Anti-skid Plate, Vibration Reduction
• TypeWedge Mounts

Dynemech wedge mounts are designed for industrial machine tools that require precision leveling. This 3-piece wedge mount has an adjustable bolt which moves the center wedge between top and bottom stationery wedges to provide lift, to the top wedge. Anti-Skid plate is provided on the top wedge therefore, machines are installed as free standing. Large supporting surface ensures solidity and rigidity. Vibration reduction is possible through assembling respective Dynemech insulation plates.

• MaterialDynemech
• SpecialitiesPrecision Leveling, Vibration Reduction, 2 Holes On Top Plate, Bolt For Fixing
• Packaging TypeStandard
• TypeWedge Mounts

Dynemech Wedge Mounts Series DB is designed for machines which require precision leveling along with vibration reduction and are desired to be firmly mounted with the isolator or machines with high axial thrust and do require any anchoring to the floor. These mounts provide 2 holes on the top plate of the wedge. The bolt which is supplied as a standard accessory with these wedge mounts can be fixed in any of these two holes. While installing the machine, the bolt can be fixed in the hole which makes sure that most of the wedge mount is covered by the leg/base of the machine.

• MaterialDynemech
• FeatureDesigned For Top Heavy Machines, Adjustable Bolt For Precise Leveling, Vibration Absorption Insulation Plates Optional
• TypeWedge Mounts
• Other CharacteristicsLarge Centered Hole For Heavy Duty Grouting, High Coefficient Of Friction For Anti-skid Properties

Dynemech Wedge Mounts, Series DTO are designed for machines which are top heavy or have eccentric motion or machines which must be anchored to the ground for higher machine stability. A large centered hole instead of two eccentric hole , allows for heavy duty grouting or fixing of machine to the ground for added strength. The adjustable bolt has been retained at an offset position to allow for center wedge movement and precise levelling and height adjustment. DTO Series Wedge Mounts can be supplied with and without the vibration absorption insulation plates. For enhanced vibration isolation and decreased vibration travel , we can bolt the machine with insulating discs. The machine hence, can be fixed securely to the foundation with no shifting/displacement thanks to high coefficient of friction and anti skid properties of Dynemech insulation plates. NOTE: Isulating discs , heavy duty anchor bolt, washers and nuts are optional accessories and not part of standard supply

• MaterialComposite Elastomeric Material And Metal
• TypeWedge Mounts
• FeaturesDesigned For Top Heavy Or Eccentric Motion Machines, Anchors Machines To The Ground

Dynemech Wedge Mounts, Series DT are designed for machines which are top heavy or have eccentric motion or machines which must be anchored to the ground. Drilling and milling machines, machining centres, special machines, long lathes, long planers, power presses etc.

• SpecialitiesTransmit Load To Ground Through Wedge Mounts At 90°, Better Alignment Of Machine Possible
• TypeWedge Mounts With Spherical Positioners

SPHERICAL POSITIONERSare designed to transmit the load of the machine to the ground through wedge mounts at 90° despite the angle difference between machine base and foundation. The pressure on the insulation plates remains even. Thus, better alignment of the machine is possible. Variations are available for free standing and bolt on machine bases either with or without insulation damping. Dynemech is open to the idea of developing customer specific requirements.