Features

• Rugged & Reliable: The impeller shaft and casing are Aluminum cast. Side Channel Blowers are built tough for continuous 24-hour operation.
• Minimal Lubrication Required: The rotating parts of Industrial Ring Vacuum Blowers are not in contact with the casing. There is, therefore, no friction during operation and thus no internal lubrication is necessary. Only the bearings need occasional lubrication after many hours of operation.
• Low Noise Level: These are direct drive units with integral silencers, which ensures low noise levels.

ConstructionDynavac Side Channel Blowershave low-noise, high-efficiency, class F insulated CE certified induction motors. Our ring blowers are made from cast aluminum alloy, and are corrosion resistant. They are suitable for the most demanding applications. The bearings used in our blowers are Japanese NSK bearings.
Operation

• Industrial Ring blowers are manufactured for both pressure and vacuum service. When a ring blower is used for pressure, it is usually configured for use as air supply units or compressors, while vacuum blowers are frequently used as vacuum pumps or fume/dust exhausters.
• All regenerative ring blowers consist of an impeller that spins within a housing. This housing contains both an intake channel and an outboard channel; hence the name side channel blowers. When the impeller moves past the intake port, air is drawn in and trapped between the impeller blades. As the impeller continues to turn, the air is pushed both inward and outward through both channels, and this process continues until the impeller stops rotating.
• It is this regenerative process that allows the side channel blower to function as both a pressure blower and a vacuum blower. While the air trapped between two impeller blades represents only a small pressure increase, the sum total of the blades, from intake to outlet, is capable of powerful continuous operating pressures.

Maintenance

• Cleaning - When dust or residue is evident, clean the entire surface of the ring blower
• Lubrication - After approximately 20, 000 hours of operation or 18 months, replace the grease in the bearings

Below are some of the applications of Industrial Ring Blowers / Side Channel Blowers.

• Aeration
• Effluent treatment plant (ETP)
• Sewage treatment plant (STP)
• Aquaculture
• Pneumatic conveying
• Automatic looms
• Automatic bottling machines
• Vacuum table
• Plating tank agitation
• Hopper agitation
• Jacuzzis
• Dental and other medical suction
• Industrial sewing machine
• Sock loom
• Furnace air intake

Features

• Powder Coated MS / Stainless Steel Body
• “No-Load Alarm” on our Vacuum Loaders
• Easy Access Modular Design
• Automatic, Pulse-jet Cleaning
• Filter Cleaning with Accumulator
• Machine mount VL’s
• Dedicated Pressure Gauge
• Robust & Compact Design
• Silent Operation (67dB)

Vacuum Loaders are better suited to capture the following kinds of dust:

• Aluminum Plant
• Asbestos Dust
• Boiler Ash Clean-Up
• Brick & Block Plants
• Cement Factory
• Chemical Dump Sites
• Coal Power Plant
• Cogenerative Plant
• Conveyor Spills
• Dust Collector Clean Up
• Sandblasting Facilities
• Flour Mill
• Fossil Fuel Plant
• Hog Fuel Spill Clean-Up
• Lead & Beryllium
• Lead Recycling Plant
• Metal Foundry
• Mining Sites
• Potash Mines
• Pulp & Paper Mill
• Railroad Spill Clean-Up
• Rubber Carbon Black
• Silica Sand
• Stones & Tiles
• Thermal Power Plant
• Train Derailment Clean-Up
• Grain Spill Clean-Up
• Gypsum & Drywall  And So much more!

Premium Features

• Heavy duty powder coated Mild Steel Construction with safety latch provides easy access. (No Tools Required) SS Mesh Filter of 530 microns separates the resin from the air in the receiver belly.
• Intelligent Counter Balancing Mechanism to ensure continuous suction and discharge.
• Reverse Pulse-jet system provides Continuous material Flow without Filter Choking.
• Heavy-duty Pneumatic Butterfly valve, equipped on VCON MAX series Vacuum Loaders for leak-free discharge.
• VCON MAX Vacuum Loader Series are supplied with a point level vibrating Fork, Rod Sensor for MAX level.
• Cartridge filtering system has been added to separate powder of dusty materials from the air system.

How It WorksDynavac fume extraction systems consist of three basic parts: a capture point where fumes are captured, an airflow source to pull fumes through the system, and a filter system to remove the pollutants.
Fume captureThe most efficient fume extraction systems remove the fumes as close as possible to their source. The best way to accomplish this is always dictated by the type of work being done :

• For tasks involving a small work area, such as hand soldering, the collection point can be situated extremely close to the source of the fumes, almost at the tip of the soldering iron. This is called Tip Extraction.
• For tasks that involve a larger working area, a higher volume fume extraction method must be used, consisting of hood or nozzle situated over the source of the fumes. This is called Volume Extraction.

Airflow SourceThe airflow source for Dynavac fume extractors are centrifugal blowers. These blowers provide the required vacuum and airflow to draw the unhealthy fumes through the filtration system and exhaust the clean air.
Filter SystemDepending on the type of application, our fume extraction system uses specially designed cartridge filter(s). These filters intake the fume and post filtration exhaust clean air.
ApplicationDynavac fume extractors are source capture fume extractors. General applications include MIG welding, TIG welding, stainless steel pipe welding, spot welding, brazing, and more.
Features

• Cleaner work environment: Reduces fumes and particulate making the workplace a healthier environment for the operator
• Dynavac fume extractors’ come with a cleanable.These filters can be cleaned with dry compressed air.
• Low noise level.
• The fume extraction system is supplied along with an articulated arm, which is flexible and enables optimum source capture of fumes.
• Highly portable: These machines are light and mobile, easy to move around.
• Low maintenance: Quick disassembly for cleaning and maintenance. Easy to access filter for cleaning.
• Economical to operate: Reduced energy consumption.

Features

• Rugged & Reliable: The impeller shaft and casing are Aluminum cast. Side Channel Blowers are built tough for continuous 24-hour operation.
• Minimal Lubrication Required: The rotating parts of Industrial Ring Vacuum Blowers are not in contact with the casing. There is, therefore, no friction during operation and thus no internal lubrication is necessary. Only the bearings need occasional lubrication after many hours of operation.
• Low Noise Level: These are direct drive units with integral silencers, which ensures low noise levels.

ConstructionDynavac Side Channel Blowershave low-noise, high-efficiency, class F insulated CE certified induction motors. Our ring blowers are made from cast aluminum alloy, and are corrosion resistant. They are suitable for the most demanding applications. The bearings used in our blowers are Japanese NSK bearings.
Operation

• Industrial Ring blowers are manufactured for both pressure and vacuum service. When a ring blower is used for pressure, it is usually configured for use as air supply units or compressors, while vacuum blowers are frequently used as vacuum pumps or fume/dust exhausters.
• All regenerative ring blowers consist of an impeller that spins within a housing. This housing contains both an intake channel and an outboard channel; hence the name side channel blowers. When the impeller moves past the intake port, air is drawn in and trapped between the impeller blades. As the impeller continues to turn, the air is pushed both inward and outward through both channels, and this process continues until the impeller stops rotating.
• It is this regenerative process that allows the side channel blower to function as both a pressure blower and a vacuum blower. While the air trapped between two impeller blades represents only a small pressure increase, the sum total of the blades, from intake to outlet, is capable of powerful continuous operating pressures.

Maintenance

• Cleaning - When dust or residue is evident, clean the entire surface of the ring blower
• Lubrication - After approximately 20, 000 hours of operation or 18 months, replace the grease in the bearings

Below are some of the applications of Industrial Ring Blowers / Side Channel Blowers.

• Aeration
• Effluent treatment plant (ETP)
• Sewage treatment plant (STP)
• Aquaculture
• Pneumatic conveying
• Automatic looms
• Automatic bottling machines
• Vacuum table
• Plating tank agitation
• Hopper agitation
• Jacuzzis
• Dental and other medical suction
• Industrial sewing machine
• Sock loom
• Furnace air intake

Features

• Powder Coated MS / Stainless Steel Body
• “No-Load Alarm” on our Vacuum Loaders
• Easy Access Modular Design
• Automatic, Pulse-jet Cleaning
• Filter Cleaning with Accumulator
• Machine mount VL’s
• Dedicated Pressure Gauge
• Robust & Compact Design
• Silent Operation (67dB)

Vacuum Loaders are better suited to capture the following kinds of dust:

• Aluminum Plant
• Asbestos Dust
• Boiler Ash Clean-Up
• Brick & Block Plants
• Cement Factory
• Chemical Dump Sites
• Coal Power Plant
• Cogenerative Plant
• Conveyor Spills
• Dust Collector Clean Up
• Sandblasting Facilities
• Flour Mill
• Fossil Fuel Plant
• Hog Fuel Spill Clean-Up
• Lead & Beryllium
• Lead Recycling Plant
• Metal Foundry
• Mining Sites
• Potash Mines
• Pulp & Paper Mill
• Railroad Spill Clean-Up
• Rubber Carbon Black
• Silica Sand
• Stones & Tiles
• Thermal Power Plant
• Train Derailment Clean-Up
• Grain Spill Clean-Up
• Gypsum & Drywall  And So much more!

Premium Features

• Heavy duty powder coated Mild Steel Construction with safety latch provides easy access. (No Tools Required) SS Mesh Filter of 530 microns separates the resin from the air in the receiver belly.
• Intelligent Counter Balancing Mechanism to ensure continuous suction and discharge.
• Reverse Pulse-jet system provides Continuous material Flow without Filter Choking.
• Heavy-duty Pneumatic Butterfly valve, equipped on VCON MAX series Vacuum Loaders for leak-free discharge.
• VCON MAX Vacuum Loader Series are supplied with a point level vibrating Fork, Rod Sensor for MAX level.
• Cartridge filtering system has been added to separate powder of dusty materials from the air system.

How It WorksDynavac fume extraction systems consist of three basic parts: a capture point where fumes are captured, an airflow source to pull fumes through the system, and a filter system to remove the pollutants.
Fume captureThe most efficient fume extraction systems remove the fumes as close as possible to their source. The best way to accomplish this is always dictated by the type of work being done :

• For tasks involving a small work area, such as hand soldering, the collection point can be situated extremely close to the source of the fumes, almost at the tip of the soldering iron. This is called Tip Extraction.
• For tasks that involve a larger working area, a higher volume fume extraction method must be used, consisting of hood or nozzle situated over the source of the fumes. This is called Volume Extraction.

Airflow SourceThe airflow source for Dynavac fume extractors are centrifugal blowers. These blowers provide the required vacuum and airflow to draw the unhealthy fumes through the filtration system and exhaust the clean air.
Filter SystemDepending on the type of application, our fume extraction system uses specially designed cartridge filter(s). These filters intake the fume and post filtration exhaust clean air.
ApplicationDynavac fume extractors are source capture fume extractors. General applications include MIG welding, TIG welding, stainless steel pipe welding, spot welding, brazing, and more.
Features

• Cleaner work environment: Reduces fumes and particulate making the workplace a healthier environment for the operator
• Dynavac fume extractors’ come with a cleanable.These filters can be cleaned with dry compressed air.
• Low noise level.
• The fume extraction system is supplied along with an articulated arm, which is flexible and enables optimum source capture of fumes.
• Highly portable: These machines are light and mobile, easy to move around.
• Low maintenance: Quick disassembly for cleaning and maintenance. Easy to access filter for cleaning.
• Economical to operate: Reduced energy consumption.