Dynamic Rubbers Pvt. Ltd.

CG Road, Ahmedabad, Gujarat

In various circumstances and application, need may arise to switch over to new generation Belt in which greater emphasis is being given to design and standardize certain critical application Belt in various segments like Cable, PVC Pipes and Extrusion Industries are amongst them.These Belt are manufactured in Technical Tie-up with M/s. International Conveyors Inc. ( USA ), one of the leaders in Power Transmission & Material Handling Belts.The reinforced all synthetic New Generation Belt with specially formulated compounds ensure consistency and dependability with improved performance and greater economy regardless of application because they offer.Light Weight Belts for Heavy Duty Service.Higher Adhesion.Higher Impact Resistance.Controlled Elongation.Highly Abrasion Resistance.Heavy & Uniform Compression.These Belts are manufactured in various combinations depending upon the economical situation of individual customers like:Polyester Cord Insert with PVC Nitrile Blending Compound Polyester Fabric Insert with PVC Nitrile Blending and PU Mixing or Synthetic RubberPolyester Fabric + Polyester Cord Insert with Construction of Rubber / PVC Nylon Strip at Bottom/Nylon Strip Sandwich in between Top and Bottom Rubber Cover with PVC Nitrile Blending Compound / Synthetic RubberDyna BeltAll kinds of Synthetic & Natural Rubber Materials may be bonded to virtually any type/make of base belt for any kind of Haul off, Extrusion & Feed Belts.Cushiontex Composite cover2-Layer Construction gives enhanced wear-resistance with resilience.Its advantages are: -Longer lifeBetter grip (warp-around effect)Tolerance to irregularitiesCushion protects top surface against aggressive profilesProfiled BeltVee Profiles allows a two belt caterpillar to haul tubes and pipes, 4 point contact maximizes grip, minimizes crushing. Radius Profiles any size to suit round thin-wall product.Complex Profiles virtually any shape of extrusion may be accommodated with matching upper/lower belt profiles-ideal for decorative trims.Slotted Covers recommended for thick covers better than individual pads, increases belt life.Blocked BeltsShaped Dynaprene blocks close-packed and bonded onto a substrate of Dynaprene enable large thin-wall profiles to be gripped without distortion.

With a wide range, to suit almost all the Industries, light duty industrial conveyor belts are manufactured with various base fabrics like polyester, nylon, cotton, solid woven, fibre glass etc. and top surface coating with Rubber/PVC/PU/Silicon. These belts are available in White, Green, Black or any other color according to specific requirement, up to 2400 mm wide. qLow operating noise & costs, reduced maintenance, excellent durability. qLargely impervious to oils, greases and many chemicals. qSpecial types give excellent grip on inclines. qAbrasion resistant - Rugged. qHigh strength - Low stretch characteristic. qLight & thin, better strength/weight ratio - energy saving. qSuperb tracking over great length- longitudinally flexible & laterally stiff. qAntistatic - prevents electrostatic build-ups. qCan be fitted with flights, profiles & sidewalls. qWide ranges of availability in 1, 2, 3 ply construction & solid woven. qSimple thermo jointing finger or spliced, and can be done at site even. Application Areas: - Packaging, Pharmaceuticals, automotive industry, sorting & baggage handling, baking, biscuit & tiles making, caning treadmills, fruit & vegetable handling fish processing, glass & insulation. Range of Rubber Sheet & Coated Fabrics The prominent range of "Dynamic" Rubber sheets are pure rubber sheeting, skirt-board, rubber insertion sheeting, gum sheeting, chute lining, hospital sheeting, sponge sheet, foam sheet, pulley lagging sheet, impression sheet, rubberized cork sheet, balata sheet.

These belts are designed to provide the major advantages for trouble free service life and have the following advantages like High Adhesion, level, higher ply strength and lower self weight, improved utilization, outstanding impact resistance, elimination of edge protection & higher longuidinal flexing.

Dynamic Endless Belt (Joint less Belt)'Dynamic' endless belt without splice joint (Joint less Belts) are manufactured directly in "Sleeve" form as per customer's requirement. The basic advantage is that, it has no transversal or longitudinal joints. Joint less belts have been highly acclaimed especially when they are used as feed belts on the system such as conveying, gauging, die cutting, dosing and weighing, squaring, stretching bag filling, packaging etc. Joint less belts provides more life then splice joint vulcanized belt.

Dynamic "Y" CLEATS BELTS

The "Y" cheverons with height of 20 mm are obtained by direct vulcanization on the beit top. It permits conveyance on slopes even stepper than 40' depending on the type of material being conveyed. This belts is particularly suitable for non-stop application, in cement, fertilizers, chemical, steel rolls industries etc.

Used for zero spillage, fast and bulk material handling.

Suitable for high inclination & magnet separator.

Use to carry materials on steeper angle up 90' with no spillage space requirement is quiet less as compared to conventional belts.

Dynamic Checkared Belt

Dynamic' Checkared belt with "V" section pulley guide single or multiple guides of "V" section directly vulcanized on to the bottom cover of the belt, ensure a perfect straight running line and resist to transverse impulses eventually applied to the bottom mainly used for bag diverters or weigh feeders.

Dynamic Embossed Belting/ High Grip Type / Rough Top

These surface are obtained by direct vulcanization of the belts top cover by using special moulds, Due to high inclination belts carrying flat packages could have slide inclination back problems, grip surface belts with profile, are offered for such applications.

In Various circumstances and application need has arised to switch over to New Generation Belt in which greater emphasis is being given to design and standardize certain critical application Belts in various segments like Cable, Pvc Pipes and extrusion Industries is amongst them.

These Belts are manufactured in Technical Tie up with M/s. International Conveyors Inc. USA, one of the leaders in Power Transmission & material handling belts.

The reinforced all synthetic new generation belts with specially formulated compounds ensure consistency and dependability with improved performance and grater economy regardless of application because they offer.

Light Weight Belts for Heavy Duty Service.

Higher Adhesion.

Higher Impact Resistance.

Controlled Elongation.

Highly Abrasion Resistance,

Heavy & Uniform Compression.

These Belts are manufactured in various combinations depending upon the economics of individual customers.

Polyester Cord Insert with PVC Nitrile Blending Compound

Polyester Fabric Insert with PVC Nitrile Blending and PU Mixing or Synthetic Rubber

Polyester Fabric + Polyester Cord Insert with Construction of Rubber / PVC Nylon Strip at Bottom/Nylon Strip Sandwich in between Top and Bottom Rubber Cover with PVC Nitrile Blending Compound/Synthetic Rubber

Dyna Belts

All kind of Synthetic & natural rubber materials may be bonded to virtually any type/make of base belt for any kind of haul off, extrusion & feed belts.

'Cushiontex' - Composite cover

2-Layer Construction gives enhanced wear resistance with resilience, advantages are: -

qLonger life

qBetter grip (warp-around effect)

qTolerance to irregularities

qCushion protects top surface against 'aggressive' profiles

With a wide range, to suit almost all the industries, light duty Industrial Conveyor Belts are manufactured with various base fabrics like Polyester, Nylon, Cotton, Solid Woven, Fibre Glass etc. and top surface coating with Rubber / PVC / PU / Silicon.These Belt are available in White, Green, Black or any other color according to a specific requirement, upto 2400 mm wide.Low operating noise & costs, reduced maintenance, excellent durability. Largely impervious to oils, greases and many chemicals.Special types give excellent grip on inclines.Abrasion resistant - Rugged.High strength - Low stretch characteristic.Light & thin, better strength / weight ratio - energy saving.Superb tracking over great length- longitudinally flexible & laterally stiff. Antistatic - prevents electrostatic build-ups.Can be fitted with flights, profiles & sidewalls.Wide ranges of availability in 1, 2, 3 ply construction & solid woven.Simple thermo jointing finger or spliced, and can be done at site even.Application Areas: Packaging, Pharmaceuticals, Automotive Industry, Sorting & Baggage Handling, Baking, Biscuit & Tiles making, Caning Treadmills, Fruit & Vegetable Handling, Fish Processing, Glass & Insulation. Range of Rubber Sheets & Coated FabricsThe prominent range of Dynamic Rubber Sheets are pure Rubber Sheeting, Skirt-board, Rubber Insertion Sheeting, Gum Sheeting, Chute Lining, Hospital Sheeting, Sponge Sheets, Foam Sheet, Pulley Lagging Sheet, Impression Sheets, Rubberized Cork Sheets, Balata Sheet.Thickness range from 0.5mm to 100mm.Width 1220mm (48) in continuous, in smoothly glossy finish & both side fabric impression finish.Color any color as per your specific requirement.Insertion sheeting with one or two / multiple piles are also available. Special purpose rubber sheets available on customize basis. Special Note: We can manufacture special purpose rubber sheet upto 2000 mm width.Natural rubber / SBR: Having good mechanical properties and weather resistance.Chloroprene: Excellent weather resistance and mechanical properties.NBR: Excellent resistance to oil and fats.EPDM: Excellent weather, steam resistance.Silicon: Excellent oil and fats resistance and for high temperature upto 200 0 C.Viton: For high temperature upto 300 0 C.

Light duty industrial Conveyor Belt having a wide range, to suit almost all the industries, are manufactured with various base fabrics like polyester, nylon, cotton, solid woven, fiber glass etc. and top surface coating with Rubber / PVC / PU / Silicon.These Belt are available in White, Green, Black or any other color according to a specific requirement, upto 2400 mm wide.

The MRF Conveyor Belt plant at Arkonam is the most modern belting plant in India, having the curing press of SIEMPELKAMP, Germany 2000 mm wide, 15.6 metre the longest press in India. The automatic belt-making table from PIRELLI, Italy provides excellent belt consolidation and optimum cure.The Belts are offered in various constructions 2 to 6 plies ranging from 200 to 800 kN/m in standard range & 4 to 6 ply belt in strength ranging from 1000 to 1800 kN/M in service & also with Hi-cushion for excellent impact resistance & improved lateral stiffness to support heavier loads. Belts are available in width ranging from 500 mm to 1600 mm.MRF Muscleflex Conveyor Belting Technical DataBelt Designation: MRF Muscleflex Belts are designated to denote the full thickness breaking strength in kilo Newtone / Metre width and the number of plies comprising the carcass. A Rating of 315 / 3 would denote a full thickness breaking strength of 315 kN/m width comprising 3 plies of fabric reinforcement.Note:For operating temperatures in excess of 125C, the maximum operating tension should not be more than 75% of RMBT. Carcass thickness and weights are subject to manufacturing tolerance. Belt with values other than above can be manufactured for special requirements.Load support data is based on belt sag between idlers limited to maximum 2% of idler span and nips of maximum 10 mm with capacity utilization above 75%.All Belt are suitable for deep throughing idlers in commonly used widths for the given rating. However, for Heavy Service Belts below 800mm, kindly refer to the MRF service Team.