Made out of two verticals and one horizontal on top with extra bracing on both vertical along with arrangements of steps for workman for moving upwards through scaffolding. All other arrangementsaresimilar to U-frame.

Standardunit consists oftwoverticalsandonehorizontal cross bar both of 48.3 mm OD tube. Lugs welded at 500 mm centres on verticals provide positive support to horizontal which has built in three-way clamps welded at two ends to fix ledger tube connecting the units.

NoloosepartsHandy, easy for erection at great heightsEasy for storageandtransportationIdeal as access scaffold or support staging since unitsconnected by ledger tubes allow variable spacings.

Consists of rigid welded frames of two verticals and two hor izontals. The f rames are interconnected by scissors cross braces in all bays or alternate bays (for top 20 Meters) of scaffolding through pins welded on frames and lockedin positionby split pins.

Cross Braces are supplied in sizes to suit frame spacings of 3, 2.5, 1.5 & 1 M. or any special sizes onrequest.

Heights: 2000, 1500 & 1000 mm
Widths: 1800, 1250 & 900 mm

Consist of rigidwelded framesof two42.4mmODVerticals andone horizontal with knee bracings. These frames are connected by diagonals and horizontals through pins welded to frames and locked in position by split pins

Light yet rigid and economicalIdeal as access scaffolding upto 20M HeightEasy and quick for erection.

Heights: 2000, 1500 & 1000 mm
Widths: 900 mm

The DynamicWedge Lock system of Scaffolding consists of Tubular verticals with wedge housings welded to them at 1000/500mm centres in four directions at right angles. Transoms Ledgers and Diagonals having captive wedges welded to them engage with the wedge housing on vertical and arelocked in positionby lockingwedges.Verticals areerectedonAdjustableBasePlateswhichcopewith variation in ground level.

Ideally suited for ship building and rapidwork sinceworking levels can be changed specially and simply without disturbing main structure of scaffolding. SafeAccess Scaffoldfor building constructionandrepair.Ledgerswhicharenonloadcarryingmemberscanbeused as handrail Most Suited for use as centering for slabs. Dropheads allow early removal formwork, retaining slab support. Rigid interlocking components quickly erectedanddismantledrequiringminimumdiagonal bracing. Excellent to buildin very high scaffolding forchimneyor siloconstruction sinceeachindividualmemberis veryhandyandlightweight.

The success of FAST LOCK lies in the node point or fastening method. Four horizontals can be fastened at one time making a rigid connection. Thehorizontals sit directlyonto the verticalsandarefirmlyclampedby the top cup.

There are no loose parts to lose. The rigid node point allows for high horizontals loads experienced with a 57KN leg load. FAST LOCK is made fromthe best quality steel providing great strength whilebeing lightandeasy to handle.Thesystemallows changing levels of ledger very easily and consist of verticals with consecutive collars welded to them at 1000/500mmcentres. Transoms, Ledger and diagonals with end bracket connectto the verticals with firm gripby twisting of collar grip.

Made out of two verticals and one horizontal on top with extra bracing on both vertical along with arrangements of steps for workman for moving upwards through scaffolding. All other arrangementsaresimilar to U-frame.

Standardunit consists oftwoverticalsandonehorizontal cross bar both of 48.3 mm OD tube. Lugs welded at 500 mm centres on verticals provide positive support to horizontal which has built in three-way clamps welded at two ends to fix ledger tube connecting the units.

NoloosepartsHandy, easy for erection at great heightsEasy for storageandtransportationIdeal as access scaffold or support staging since unitsconnected by ledger tubes allow variable spacings.

Consists of rigid welded frames of two verticals and two hor izontals. The f rames are interconnected by scissors cross braces in all bays or alternate bays (for top 20 Meters) of scaffolding through pins welded on frames and lockedin positionby split pins.

Cross Braces are supplied in sizes to suit frame spacings of 3, 2.5, 1.5 & 1 M. or any special sizes onrequest.

Heights: 2000, 1500 & 1000 mm
Widths: 1800, 1250 & 900 mm

Consist of rigidwelded framesof two42.4mmODVerticals andone horizontal with knee bracings. These frames are connected by diagonals and horizontals through pins welded to frames and locked in position by split pins

Light yet rigid and economicalIdeal as access scaffolding upto 20M HeightEasy and quick for erection.

Heights: 2000, 1500 & 1000 mm
Widths: 900 mm

The DynamicWedge Lock system of Scaffolding consists of Tubular verticals with wedge housings welded to them at 1000/500mm centres in four directions at right angles. Transoms Ledgers and Diagonals having captive wedges welded to them engage with the wedge housing on vertical and arelocked in positionby lockingwedges.Verticals areerectedonAdjustableBasePlateswhichcopewith variation in ground level.

Ideally suited for ship building and rapidwork sinceworking levels can be changed specially and simply without disturbing main structure of scaffolding. SafeAccess Scaffoldfor building constructionandrepair.Ledgerswhicharenonloadcarryingmemberscanbeused as handrail Most Suited for use as centering for slabs. Dropheads allow early removal formwork, retaining slab support. Rigid interlocking components quickly erectedanddismantledrequiringminimumdiagonal bracing. Excellent to buildin very high scaffolding forchimneyor siloconstruction sinceeachindividualmemberis veryhandyandlightweight.

The success of FAST LOCK lies in the node point or fastening method. Four horizontals can be fastened at one time making a rigid connection. Thehorizontals sit directlyonto the verticalsandarefirmlyclampedby the top cup.

There are no loose parts to lose. The rigid node point allows for high horizontals loads experienced with a 57KN leg load. FAST LOCK is made fromthe best quality steel providing great strength whilebeing lightandeasy to handle.Thesystemallows changing levels of ledger very easily and consist of verticals with consecutive collars welded to them at 1000/500mmcentres. Transoms, Ledger and diagonals with end bracket connectto the verticals with firm gripby twisting of collar grip.