Dydac Controls

Mayur Vihar, Delhi

We are engaged in offering feature packed Dydac Hot Runner Temperature Controllers for PET Preform Industry. Dydac Hot Runner Temperature Controllers for PET Preform Industry have bar graph indication of percentage output going to heaters. This Dydac Hot Runner Temperature Controllers for PET Preform Industry is CE Compliant and Phase Angle Power Controller is CE Compliant. The Power Controllers are Phase Angle Fired and are Variable Power Controllers, which give as much Power to the Heaters as required to maintain the temperature, thus saving the Energy (Energy Conservation at Set Point) and increasing the life of Heaters and Less Production Break Down. Dydac Hot Runner Temperature Controllers for PET Preform Industry has Alarm option for over shooting and under shooting of temperature. In case thermocouple fails, it will give Alarm. Special Highlights Of Our Dydac Hot Runner Temperature Controllers for PET Preform Industry :

• Microprocessor Based Auto Tune PID Temperature Controller
• Accepts J , K , R, S, T Type Thermocouple
• (Soft Start) bake out feature prevents moisture at startup
• Auto/Manual Transfer
• Accuracy of +/- 1 degree Celsius
• Internal Solid state triac, triggered by Phase angle firing
• Dual displays for Process and Set Temperatures
• High Speed Fuses 16 A protection Fuses.
• New Series with Short Circuit protection of Power Modules by C Curve MCB
• Latest Generation PID algorithm
• Power Controller can take 3600 or 7200 Watts at 240 VAC
• Heaters life is extended to 10 times

Selection of Heater Current Load :

• 16 Amps
• 32 Amps

Features

1. Auto display errorfunction 2. Auto / Manual / Standby controlmode 3. Auto tuning / Selftuning 4. Thermocouple J or K typeselectable 5. Deviation high & low alarmoutput 6. Temperature range100400 C / 212752 F 7. Softstart 8. DPIDControl StandardSpecification

Standard specification
Power Supply	AC 85V 250V, 50 / 60Hz
Load Current Rating (A)	15A, 1650W (110V), 3300W (220V)
Main Input	Thermocouple K, J type
Output	Pulse Width Modulation (PWM)
Alarm	Relay Output 10A / 250VAC
Temperature Range	100C 400C / 212F 752F
Control Mode	DPID (Double Differentiation Control)
Accuracy	0.5%F.S. 1dig.
Work Temperature	-10C 50C
Work Humidity	10% 80%RH (non-condensing)
Weight	About 470g

Customers can obtain out qualitative range of Axis LT-ES Series Temperature PID Process Controller at modest rates. We manage a huge stock of Temperature PID Process Controller in our state of the art warehouse to address customer’s bulk demands with ease.

 

Details :

The Axis family of microprocessor based controllersc ombine a high degree of functionality and reliability at a very low price, in 4 different formats : 1/16 DIN, 1/8 DIN, 1/ 4 DIN.

They are ideal controllers for regulating temperature in a variety of applications, including :

• Dryers.
• Semiconductor packaging /testing.
• Plastic processing.
• Packaging machinery.
• Painting and coating.
• Climatic chambers.
• The Axis family satisfies low cost basic control requirements and also provides advanced features such as motor position control, phase angle power control and Set-point programming
• Dual displays and Bargraph. Programmer functionality.
• Two 4 digits displays and one LED bargraph to display the PV and SP.
• Easy to configure. Two different configuration levels provide easy access to parameters.
• A 4-digit security code preventsunauthorized changes. Parameters can be hidden to the user to prevent misconfiguration of the unit.
• Various Control algorithms.
• PID or ON/OFF control.
• Universal Power supply - Operates on any line voltage from 85VAC TO 265VAC AT 50/60HZ.

We are engaged in offering feature packed Dydac Hot Runner Temperature Controllers. Dydac Hot Runner Temperature Controllers have bar graph indication of percentage output going to heaters. This Dydac Hot Runner Temperature Controllers are CE Compliant and Phase Angle Power Controller is CE Compliant. The Power Controllers are Phase Angle Fired and are Variable Power Controllers, which give as much Power to the Heaters as required to maintain the temperature, thus saving the Energy (Energy Conservation at Set Point) and increasing the life of Heaters and Less Production Break Down. Dydac Hot Runner Temperature Controllers have Alarm option for over shooting and under shooting of temperature. In case thermocouple fails, it will give Alarm. Special Highlights Of Our Dydac Hot Runner Temperature Controllers :

• Microprocessor Based Auto Tune PID Temperature Controller
• Accepts J , K , R, S, T Type Thermocouple
• (Soft Start) bake out feature prevents moisture at startup
• Auto/Manual Transfer
• Accuracy of +/- 1 degree Celsius
• Internal Solid state triac, triggered by Phase angle firing
• Dual displays for Process and Set Temperatures
• High Speed Fuses 16 A protection Fuses.
• New Series with Short Circuit protection of Power Modules by C Curve MCB
• Latest Generation PID algorithm
• Power Controller can take 3600 or 7200 Watts at 240 VAC
• Heaters life is extended to 10 times

Selection of Heater Current Load :

• 16 Amps
• 32 Amps

Our company is one of the reliable providers of our own and branded Connector & Cables Hot Runner Temperature Controllers. They are energy efficient and provide uniform heating. Buyers can get Connector & Cables Hot Runner Temperature Controllers from us at competitive prices and expect on time delivery of consignments. Buyers can ask for individually tailored solutions for our Connector & Cables Hot Runner Temperature Controllers as well.

 

Mold Power and Thermocouple Cables Combination : More specifically designed for the plastic industry by process of hot runner injection molding, Dydac manufactures mold power and mold thermocouple cables designed specifically for your mold and temperature controller connections. Working hand-in-hand with processors as well as mold makers, Dydac can provide virtually any configuration or adaptor cable that is best suited for your individual process. Dydac can assist with cable design, cable and connector selections. With our just-in-time manufacturing capabilities, Dydac can produce cables on demand.

Mold Power Cables : Mold power cables are used to connect the mainframe to the power input connector located on the mold. All cables are wired for 5, 8, or 12 (rated @ 15A) zones as well as units working on 30A. Mold power cables are available in any length, 10 and 20 feet are standard stocked cables.

Mold Thermocouple Cables : Mold thermocouple cables are used to connect the mainframe to the thermocouple connector on the mold. Cables are wired for 5, 8, or 12. In most cases the connections on the controller remain constant, while the connector on the mold end can vary. Mold thermocouple cables are available in any length, 10 and 20 feet are standard stocked cables.

We are engaged in domestic and international trading of structurally table, corrosion resistant and industrial-grade Dydac Hot Runner Temperature Controllers. Our company is one of the leading fabricators and traders of a comprehensive assortment of branded Dydac Hot Runner Temperature Controllers as well. They are fabricated from premium raw materials using the latest CAD/ CAM technologies. Buyers can get Dydac Hot Runner Temperature Controllers from us as per requirement and expect on time delivery of consignments.

 

Details :

• High Speed Fuses 16 A protection Fuses.
• New Series with Short Circuit protection of Power Modules by C Curve MCB
• Latest Generation PID algorithm.
• Power Controller can take 3600 or 7200 Watts at 240 VAC
• In case of thermocouple Failure you can set the Pow
• production.
• Heaters life is extended to 10 times.
• PID Temperature controller has bar graph indication of percentage output going to
• heaters.
• PID Temperature Controller is CE Compliant and Phase Angle Power C
• Compliant.
• The Power Controllers are Phase Angle Fired and are Variable Power Controllers which gives as much Power to the Heaters as required to maintain the Temperature thus saving the Energy ( Energy Conservation at Set Point) and increase the life of Heaters and Less Production Break Down.
• Alarm Option for over shooting and under shooting of Temperature. In case Thermocouple
• Fails it will give Alarm

Selection of Heater Current Load :

• 16 Amps
• 32 Amps

Our company offers quality-tested Non Contact Infrared Temperature PID Process Controller. The Process Controller we make available is manufactured in compliance with international quality standards. Buyers can obtain it at nominal rates.

 

Features :

• Features Smart Sight- laser sighting for correct target distance
• Includes bright illumination LED flashlight
• Measures temperatures up to 535^oC (999^oF)
• Features 1% accuracy
• The handheld pyrometer is developed specifically with the needs of today’s
• automotive, diesel and transportation technicians in mind. Rugged, fast, and
• convenient, this professional tool offers many valuable features for
• automotive technicians. laser sighting system that merges into a single laser
• at the correct distance to the measured target.
• Covers temperature ranges from 0^oC to 500^oC (32^oF to 932^oF)
• Easily replaces traditional probes and thermocouples
• Accessories for cooling and air purging
• Stainless steel electronics housing

Industry Applications :

• Plastic Processing - Measure temperatures of extrusion, thermoforming and coating to ensure top product quality
• Packaging, Paper & Converting - IR sensors in automation applications including packaging, printing and converting
• Glass Processing - Monitor temperatures in Melt Furnace, Flat Glass, Bottles and Containers, and Glass Fiber production
• Building & Construction Material - Verify temperatures in cement, construction materials, and architectural glass manufacturing
• Other Applications - Use IR sensors in fire detection, tobacco drying, food, automotive, electrical, plant and facilities monitoring applications

Product Description :

• The noncontact infrared pyrometer is compact and easy to install. Designed for easy integration into a standard 4 contact probes with a J-type or K your application is susceptible to noise or requires a longer cable run.
• The unit's onboard electronics are protected by a rugged IP 65 (NEMA steel housing, allowing the sensor to function in ambient temperatures to 70^oC (160^oF) without cooling. With water cooling, the temperatures to 260^oC (500^oF).
• The Sensor is designed for continuous temperature monitoring in a broad range of  Manufacturing processes and OEM applications. The sensor provides the advantages of infrared temperature measurement in a powerful, compact, integrated sensor. The Sensor can easily replace traditional contact probes with a J-type or K-type thermocouple output, or with a user scaleable 0-5 volt output.
• The onboard electronics are protected by a rugged IP 65 (NEMA-4) stainless
• steel housing, allowing the sensor to function in ambient temperatures to
• 70^oC (160^oF) without cooling.
• Type J or K, or 0-5 V output
• IP 65 (NEMA-4) stainless steel electronics housing
• 4:1 optics at 90% energy
• 350 mSec (95%) response time
• Powered by 12–24 VDC at 20 mA
• Accessories for cooling and air purging
• Advanced feature set for OEM applications
• Wide -20 to 500^oC (-4 to 932^oF) temperature range
• 13:1 optics at 90% energy
• 150 mSec (95%) response time
• Rugged IP 65 (NEMA-4) stainless steel housing
• Scaleable 0-5 V, type J or K output
• Alarm output
• Sensor status/self diagnostic LED indicator
• RS232 digital communications for sensor set-up and monitoring
• Adjustable signal processing
• Accessories for air purging and lens protection

Buyers can get in touch with us for obtaining the top-notch Axis AX Series Temperature PID Process Controller at modest rates. The effective PID Process Controller guarantees hassle free operation and can be relied upon for major industrial operations. We ensure timely delivery across the world.

More about Axis AX Series Temperature PID Process Controller :

• Low cost, Effective, Easy to use PID Temperature Controller
• 3-Digit Dual Row display (3-Digit for PV & 3-Digit for SV)
• Selectable sensor input (T/C : K, T, E, J, N & RTD) from keyboard
• Programmable Lower & Upper set point limits
• Programmable control action ON-OFF/PID control
• Selectable heat/cool logic in ON-OFF control mode
• Four different alarm modes (Low/High/Band/Deviation)
• Alarm latch / Alarm inhibit function
• Program lock function (to prevent unauthorized tampering)
• Universal supply voltage ranges from 90 to 270 VAC
• Available in 4 Standard DIN sizes

We are the main supplier of this product.

Avail premium Athena RMT Series Hot Runner Temperature Controllers, that are microprocessor-based, dual-zone temperature controllers specifically designed for runner less molding applications effectively doubling the zone count per module without doubling the price. Athena RMT Series Hot Runner Temperature Controller feature two easy-to-use operator keypads, four LED displays, and discrete indicators for heat output, alarm, degree F/C indication, manual and closed loop mode. Why Our Athena RMT Series Hot Runner Temperature Controller?

• Accepts Type J thermocouple
• Bumpless auto/manual transfer
• CompuStep bake out feature prevents moisture at startup
• Built-in loop break for open heater, shorted triac, reversed or shorted thermocouple
• Open thermocouple break protection with jumperselectable hutdown or average power output based on operation
• Preset alarms at 30oF (17oC)
• SafeChange hot swap feature allows safe removal and replacement of module]
• CE compliant
• 15 amps per zone

Athena RMA Series Hot Runner Temperature Controller is a microprocessor-based; single-zone temperature controller specifically designed for runner less molding applications. Our Athena RMA Series Hot Runner Temperature Controller features an easy-to-use operator keypad, two LED displays, and discrete indicators for heat output, alarm, degree F/C indication, manual, and closed loop mode. Why Our Athena RMA Series Hot Runner Temperature Controller?

• Compatible with industry standards control modules and mainframes
• Accepts Type J thermocouple
• Bumpless auto/manual transfer
• CompuStep bake out feature prevents moisture at startup
• Built-in loop break for open heater, shorted triac, reversed or shorted thermocouple
• Open thermocouple break protection with jumperselectable shutdown or average power output based on operation
• Preset alarms at 30oF (17oC)
• SafeChange hot swap feature allows safe removal and replacement of module
• CE compliant

Athena RMB Series Hot Runner Temperature Controller offered by us is a microprocessor-based; single-zone temperature controller specifically designed for runner less molding applications. It features an easy-to-use operator keypad, two LED displays, and three discrete indicators for heat-current, alarm and manual mode. Athenas mainframes are compatible with all D-M-E Companys G SERIES and SMART SERIES, ITC, MCS, YUDO and INCOE brand mainframes. Why Our Athena RMB Series Hot Runner Temperature Controller?

• Accepts Type J or Type K thermocouple input (jumper selectable)
• Auto-tuning, with adjustable proportional band and rate
• Bump-less auto/manual transfer
• CompuStep bake out feature prevents moisture at startup
• Built-in loop break, short, open, and reverse thermocouple protection
• Built-in triac safety protection
• Ground-fault protection
• Preset alarms at 30o F (17oC)
• Jumper-selectable soft-start mode
• Current monitor feature displays average current to load
• Safe Change TM hot swap feature allows safe removal and replacement of module
• CE compliant

Athena RMC Series Hot Runner Temperature Controller brings new and highly productive benefits to injection molders looking for a modular hot runner controller thats flexible, easy to set up and simple to operate. Using the popular Modbus communications protocol, the Athena RMC Series Hot Runner Temperature Controller gives users the ability to set or change all zones, either remotely from a desktop computer, or (with the ALL command) from any other individual RMC module in the mainframe. Features :

• Choice of three default modes for open thermocouple condition
• Built-in triac safety protection
• Accepts J or K thermocouple input (jumper selectable)
• SafeChangeTM hot swap feature allows safe removal and replacement of module
• CompuStep bake out feature prevents moisture at startup
• Built-in loop break, short, open, and reverse thermocouple protection
• Boost mode for temporary % of power output increase Ground-fault protection
• Adjustable setpoint limits
• Stores highest temperature detected
• Current monitor feature displays average current to load
• CE compliant

Contact us for obtaining high-performance RMA Series Athena Hot Runner Temperature Controllers at very affordable prices! The products that we offer are manufactured in conformation with the industrial standards using high-grade raw materials and advanced machines.

 

Description : The Athena Series RMA is a microprocessor-based, single-zone temperature controller specifically designed for runnerless molding applications. It features an easy-to-use operator keypad, two LED displays, and discrete indicators for heat output, alarm, degree F/C indication, manual, and closed loop mode.

Features :

• Compatible with industry standards control modules and mainframes
• Accepts Type J thermocouple
• Bumpless auto/manual transfer
• CompuStep^® bake out feature prevents moisture at startup
• Built-in loop break for open heater, shorted triac, reversed or shorted thermocouple
• Open thermocouple break protection with jumperselectable shutdown or average power output based on operation
• Preset alarms at 30^oF (17^oC)
• SafeChange™ “hot swap” feature allows safe removal and replacement of module
• CE compliant

Our RMB Series Athena Hot Runner Temperature Controllers are thoroughly inspected by the experts to ensure zero defects at buyer’s end. We also deal in reliable RMB Series Athena Hot Runner Temperature Controllers and make them available in bulk. Also, we ensure timely delivery.

 

Description : The Athena Series RMB is a microprocessor-based, single-zone temperature controller specifically designed for runnerless molding applications. It features an easy-to-use operator keypad, two LED displays, and three discrete indicators for heat-current, alarm and manual mode. Athena’s mainframes are compatible with all D-M-E Company’s G SERIES and SMART SERIES, ® ITC, MCS, YUDO® and INCOE® brand mainframes.

Features :

• Accepts Type J or Type K thermocouple input (jumper selectable)
• Auto-tuning, with adjustable proportional band and rate
• Bumpless auto/manual transfer
• CompuStep® bake out feature prevents moisture at startup
• Built-in loop break, short, open, and reverse thermocouple protection
• Built-in triac safety protection
• Ground-fault protection
• Preset alarms at 30^o F (17^oC)
• Jumper-selectable soft-start mode
• Current monitor feature displays average current to load
• SafeChangeTM “hot swap” feature allows safe removal and replacement of module
• CE compliant

They are compact-in-design and safe. Buyers can get a wide range of RMC Series Athena Hot Runner Temperature Controllers from us at market leading prices. We are engaged in fabricating RMC Series Athena Hot Runner Temperature Controllers. Buyers can rely on to supply RMC Series Athena Hot Runner Temperature Controllers in bulk and maintain year round products availability.

 

Description : The Athena Series RMC brings new and highly productive benefits to injection molders looking for a modular hot runner controller that’s flexible, easy to set up, and simple to operate. Using the popular Modbus® communications protocol, the Series RMC gives users the ability to set or change all zones, either remotely from a desktop computer, or (with the ALL command) from any other individual RMC module in the mainframe.

Features :

• Choice of three default modes for open thermocouple condition
• Built-in triac safety protection
• Accepts J or K thermocouple input(jumper selectable)
• SafeChangeTM “hot swap” feature allows safe removal and replacement of module
• CompuStep^® bake out feature prevents moisture at startup
• Built-in loop break, short, open, and reverse thermocouple protection
• Boost” mode for temporary % of power output increase
• Ground-fault protection
• Adjustable setpoint limits
• Stores highest temperature detected
• Current monitor feature displays average current to load
• CE compliant

Buy corrosion resistant and highly durable Axis Hot Runner Temperature Controllers from us as per requirements. Our company is ranked among responsive and responsible traders and fabricators of a comprehensive assortment of Axis Hot Runner Temperature Controllers. They function optimally and guarantee long service life.

We are involved in offering excellent quality Sub-Zero Chiller Temperature PID Process Controllers. In order to cater the bulk and urgent requirements of the buyers, we maintain a large stock of these in our warehouse.

We are engaged in offering our premium range of Athena Temperature PID Process Controller to our esteemed customers. Our Process Controller is highly appreciated owing to its compact design and efficient operation.

 

Series 16C DIN Temperature/Process Controller :

The Athena 16C is a 1/16 DIN panel mounted, autotuning controller that can be used for precise control of a single loop with two independent outputs fieldconfigurable as direct acting, reverse acting or alarm. RS-232 or RS-485 communications interfaces are available, and two digital LED displays provide visual indication of various controller functions.

• Field-Configurable Universal Inputs
• User-Selectable Ramp to Setpoint
• 8-Level Ramp/Soak Control
• Bumpless Auto/Manual Transfer
• NEMA 4X (IP65) Dust and Splash-Proof Front Panel
• Decimal Display in 0.1° for Measured Temperatures Under 1000° F or C
• On/Off Through Full PID Operation (P, PI, PD, PID)
• Adjustable Hysteresis and Deadband
• Outputs Configurable as Alarms
• Field-Configurable Process or Deviation Alarms; Latching or Non-Latching; Band and Inverse Band
• Dual Output/Dual Alarm Capabilities
• UL, cUL, and CE Approvals
• Options Include Multi-Function Contact/Digital Input, Transducer Excitation, and Auxiliary Output
• Special and Custom Options Available
• DIN Rail Option

Series 18C/19C/25C DIN Temperature/Process Controller :he Athena 18C and 19C are available as 1/8 DIN (18C) vertical or 1/8 DIN (19C) horizontal models. Both panel mounted, auto-tuning controllers can be used for precise control of a single loop with two independent outputs field-configurable as direct acting, reverse acting, and 2 alarms. RS-232 or RS-485 communications interfaces are available for both models, and two digital LED displays provide visual indication of various controller functions.

• Field-Configurable Universal Inputs
• User-Selectable Ramp to Setpoint
• 8-Level Ramp/Soak Control
• Bumpless Auto/Manual Transfer
• NEMA 4X (IP65) Dust and Splash-Proof Front Panel
• Decimal Display in 0.1° for Measured Temperatures Under 1000° F or C
• On/Off through Full PID Operation (P, PI, PD, PID)
• Adjustable Hysteresis and Deadband
• Outputs Configurable as Alarms
• Field-Configurable Process or Deviation Alarms; Latching or Non-Latching; Band and Inverse Band
• Dual Output/Dual Alarm Capabilities
• UL, cUL, and CE Approvals
• Options Include Remote Analog Setpoint, Multi- Function Contact/Digital Input, Transducer Excitation,
• and Auxiliary Output
• Special and Custom Options Available

We are offering a comprehensive array of energy efficient RMT Series Athena Hot Runner Temperature Controllers. Incorporated with the latest technologies, our RMT Series Athena Hot Runner Temperature Controllers come with adjustable thermostat control knobs. They are user friendly and highly reliable.

 

Description : The Athena Series RMT is a microprocessor-based, dual-zone temperature controller specifically designed for runnerless molding applications effectively doubling the zone count per module without doubling the price. It features two easy-to-use operator keypads, four LED displays, and discrete indicators for heat output, alarm, degree F/C indication, manual and closed loop mode.

Features :• Accepts Type J thermocouple• Bumpless auto/manual transfer• CompuStep^® bake out feature prevents moisture at startup• Built-in loop break for open heater, shorted triac, reversed or shorted thermocouple• Open thermocouple break protection with jumperselectable shutdown or average power output based on operation• Preset alarms at 30^oF (17^oC)• SafeChange™ “hot swap” feature allows safe removal and replacement of module• CE compliant• 15 amps per zone