Other Products / Services #1335837

• Load measurement range -0.2 - 100% FS
• Load Indicating accuracy - within +- 1%
• Displacement indicating accuracy - Within +- 1%
• Displacement resolution - 0.04 thou (1um)
• Pipe ID measurement range accuracy - 0.0004" (0.01mm)
• Deflection measuring range - 0 - 100%FS
• Testing speeding - 0.02-7.9in./min (0.5 - 200mm/min)
• Error of Speed -within +- 1%
• Testing method - Ring stiffness ISO 9969 and eq.
• Operating method - PC control
• Max. compressing space- 118" (3000mm)
• Dimension DxWxH - 26"(650mm) 54" (1360mm) x 170" (4300mm)

Specification :

• Size of furnace : 10 inch x 8 inch x 8 inch
• Material of construction: M.S.
• Accessories : Desiccator, Glass U tube, Combustion tube, Combustion boat, Rotometer, Rubber tube [1 no. each], Glass end caps 2 nos. and
• Paint : Powder coated.

Specification : Capacity : 5 tonnes*.Operation : Manual.Horizontal day light : 12 inch.Cross travel : 4 inch.Paint : Powder coated.

• To prepare the samples for Izod/ Charpy test as per ASTM - D256.
• Digital display having the resolution of 0.01mm.
• Supply 230 VAC 10 VAC/ 50 Hz.

As per ASTM D1709 and IS 2508.

• Smoke ventilation provided at backside.
• Temperature cross checking provision provided
• Temperature Range Ambient to 1100 C.
• Temperature control system Microcontroller based PID controller.
• Supply 230 VAC/ 50 Hz.
• Paint Powder coated.

Hot Air Oven is laboratory purpose oven used for multiple test application for plastics like shrinkage, reversion, moisture content and lateral E.S.C.R. test at different temperatures.HOT AIR OVEN Model: AE-HAO-S

• Material of construction M.S.( others optional)
• Temperature Range Ambient to 250 C. (others optional)
• Temperature control system Microprocessor based PID controller.
• Timer: Programmable with Memory Backup
• Supply 230 VAC/ 50 Hz.
• Paint Powder coated.

As per ASTM, ISO & IS standards

• To simulate the various conditions of Temperature + RH.
• Easy to run the chamber.
• Operations from both sides, through controller as well as through computer.
• Graphical presentation on PC.
• Report generation in the form of Data + Graphical
• Resolution 0.1 %Rh.
• Accuracy +/- 2 %Rh.
• Supply 230 VAC 10 VAC/ 50 Hz.
• Paint Powder coated.

To seals the specimen under specified temperature, pressure and dwell time, to test the heat seal strength of laminated films. Film heat seal tester confirms to standard of ASTM F2029.

As per ASTM, ISO & IS standards

• Mechanical-electrical integration of control system. Multifold heat sealing jaws with different areas according to customer's requirement, and easy to change.
• Temperature controlling: PID.
• Resolution 0.1 C.
• Dwell Time: 0.01Secs to 99.99 Secs.
• Supply 230 VAC 10 VAC/ 50 Hz.
• Paint Powder coated.

As per ASTM, ISO & IS standards

• Qualitest, a leading manufacturer and supplier of testing equipment for rubber and plastics, offers a full range of certified Specimen cutting dies and cutters as well as Clicker presses for polymer laboratories. This high quality range of specimen cutting dies and sample cutter are made exactly according to the specific ASTM, DIN, ISO, or JIS standards and are highly accurate for perfect preparation of your test specimens. All of these specimen cutting dies come in a padded carrying case and are supplied with full certification. Qualitest also offers re-sharpening service for these specimen dies and maintain highest quality of production and standards.

As per IS 4984 and IS 4985.

• 8 inch dia hot plate.
• Temperature control system Thermostat.
• Microscope screen 6 inch.
• Supply 230 VAC/ 50 Hz.
• Paint Powder coated.

HOT AIR OVEN Model: AE-HAO-BAs per IS, ISO standards

• Working Size 1200mm X 1200mm X 1200mm
• Material of construction Outer: MS Inner: SS
• Temperature Range Ambient to 150 C.
• Temperature control system Microprocessor based PID controller + Thyristor control.
• Supply 230 VAC/ 50 Hz
• Paint Powder coated.

COMPUTERISED HYDROSTATIC PRESSURE TESTING PANEL (Model: AE-HPT-FC-8)Advance Hydrostatic Pressure Testing Machine are available with advance technology as per different application for the test of internal pressure of R-PVC, C-PVC, U-PVC, MDPE, HDPE, LLDPE, PP-R pipes, Fittings, Valves etc. as per ASTM, BIS, ISO, DIN, IS and other equivalent standards.
TECHNICAL SPECIFICATIONS

• Nos of Stations: 8. (other optional)
• Pressure Range: 0 100 bars. ( others optional)
• Resolution: 0.1 Bar or 0.1 Kg/cm
• Units: Bar, Kg/cm selectable
• Pressure + Time direct display on individual controller.
• Graphical display and report prints through software.
• Supply 230 VAC/ 50 Hz.
• Paint Powder coated.

As per ASTM, ISO & IS standards

• This Equipment is designed for testing of different type of methods pf rubber, rubber products and plastic industries at ultra low temperature treatment test in cryostat chamber.
• The testing can be carried out as per ASTM, IS and many more test methods i.e. Brittle Point, Impact Test, Rubber Hose Bending and Compression Test.
• To simulate the various conditions of Temperature.
• Easy to run the chamber.
• Operations from both sides, through controller as well as through computer.
• Paint Powder coated.