Our Products
Sluice gates, which can be mounted into the channel or on the wall, are manufactured in a wide range of models including manual, electric driven or pneumatic types. We manufacture sluice gates in various dimensions from 150x150 mm up to 4, 000x4, 000 mm with the casing and frame thickness calculated regarding water pressure.
SL. No. | Description | Material |
1 | GATE FRAME | CI |
2 | DOOR | CI |
3 | HEAD STOCK | CI |
4 | HAND WHEEL | CI |
5 | GUIDE STRIP | CI |
6 | ANCHOR BOLTS | CARBON STEEL |
7 | SPINDLE | STAINLESS STEEL |
8 | FRAME FACE SEAT | LTB / SS |
9 | DOOR FACE SEAT | LTB / SS |
10 | OPERATING LIFT NUT | LTB / SS |
11 | FASTENERS | CARBON STEEL / SS |
12 | BEVEL GEAR UNIT | MFR'S STD |
13 | SPINDLE GUIDE | CI / MS |
14 | EXTENSION ROD | MS / SS |
15 | COUPLING | MS / SS |
DVPL Open channel sluice gate is predominantly used in sewage or open channel of water. The gates are fixed between two parallel walls used to isolate the flow from and to the open channel. This light weight sluice gate helps in faster erection. Such type of sluice gate suits both seating & unseating water head.
SL. No. | Description | Material |
1 | GATE FRAME (SIDE GUIDES) | MS / CI / AL |
2 | GATE FRAME (SUPPORT BAR) | MS / CI / AL |
3 | SHUTTER | MS / CI / AL |
4 | HAND WHEEL | CI / MS |
5 | HEAD STOCK | CI / MS |
6 | SEATING FACES | STAINLESS STEEL |
7 | RESILIENT RUBBER SEAL | RUBBER |
8 | SEAL RETAINER STRIP | STAINLESS STEEL |
9 | OPERATING NUT | LTB |
10 | SPINDLE (RISING) | STAINLESS STEEL |
11 | FASTENERS (INTERNALS) | STAINLESS STEEL |
12 | YOKE | FAB STEEL |
13 | SHUTTER PIN | STAINLESS STEEL |
14 | FLUSH BOTTOM SEAL | RUBBER |
DVPL Cast Iron Thimble Mounted Sluice Gate. Offered range of gates is used for controlling flow of water, slurry and sewage. These gates are manufactured by using best quality of cast iron procured from authentic vendors of market.
SL. No. | Description | Material |
1 | GATE FRAME | CI |
2 | DOOR / SLIDE | CI |
3 | WALL THIMBLE | CI |
4 | EXTENSION GUIDE | CI |
5 | WEDGING DEVICE | CI |
6 | FRAME SUPPORT BRACKET | CI |
7 | HEAD STOCK | CI |
8 | HAND WHEEL | CI |
9 | ELEC.ACTUATOR | ROTORK / AUMA |
10 | BEVEL GEAR UNIT | MFR'S STD |
11 | SPINDLE | STAINLESS STEEL |
12 | FRAME FACE SEAT | LTB / SS |
13 | SLIDE FACE SEAT | LTB / SS |
14 | FASTNERS FOR GATE ASSY. (AS REQD.) | CARBON STEEL / SS |
15 | ANCHOR BOLTS | CARBON STEEL / SS |
16 | DOOR PIN | STAINLESS STEEL |
17 | GASKET | RUBBER |
18 | STEM PROTECTING COVER | GI / POLYCARBONATE TUBE |
19 | COUPLING (AS REQD.) | STAINLESS STEEL |
20 | EXTN. SPINDLE (AS REQD.) | STAINLESS STEEL |
21 | SPINDLE GUIDE BRACKET (AS REQD.) | MILD STEEL |
22 | DOOR SUPPORTING GUIDE CLAMP | FABRICATED MILD STEEL |