Kolkata, West Bengal, India
Verified
Add Review
Our Products
Additional Information:
Payment Terms : L/C, T/T
Nitrile Rubber (Acrylonitrile Butadiene Rubber) is a co-polymer of butadiene and acrylonitrile. It is a unique rubber polymer having excellent resistance to majority of oil and solvents. It is also suitable for use in the foor industry.
It has medium to high tensile strength, compression set, flexibility and impermeability to gases and is resistant to most inorganic and organic chemical products other than antioxidants agents and chlorine. It has an operating temperature range of -30°C to +120°C. Due to its polar nature, we do not recommend use with polar liquids like ketones, ethers and amines.
Applications/Use :
Technical Specifications
| Product Code | Specific Gravity (gm/cm3) | Hardness (+/- 5° Shore A) |
Tensile Strength (min. Kg/cm2) |
Elongation at Break (min. %) | Oil Swell in ASTM Oil No. 903 (%) | Compression Set at 70°C for 22hrs (%) | Temp. Range (°C) |
|---|---|---|---|---|---|---|---|
| NB 16070C | 1.6 | 70 | 20 | 150 | 30 | ---- | -30 to +70 |
| NB 16060C | 1.6 | 60 | 25 | 175 | 30 | ---- | -30 to +70 |
| NB 15070S | 1.5 | 70 | 50 | 200 | 25 | 45 | -30 to +120 |
| NB 15060S | 1.5 | 60 | 50 | 225 | 25 | 45 | -30 to +120 |
| NB 13070P | 1.3 | 70 | 100 | 250 | 15 | 35 | -30 to +120 |
| NB 13060P | 1.3 | 60 | 100 | 300 | 15 | 35 | -30 to +120 |
| NB 13050P | 1.3 | 50 | 100 | 350 | 15 | 35 | -30 to +120 |
| NB CD(Custom) | 1.10 to 1.80 | 40 to 80 | 20 to 150 | 150 to 500 | 15 to 30 | 35 to 55 | -30 to +120 |
| Standard Sizes |
1) 1.2 Mtr. Wide x 10.0 Mtr. Long. 2) 1.0 Mtr. Wide x 2.0 Mtr. Long. |
|---|---|
| Custom Size | Max. width upto 2400mm, length upto 20M and thickness from 1mm to 100mm available on request. |
| Standard Colour | Black (Red, Blue & other colours available on request subject to availability.) |
| Surface Finish | 1) SS - Both Side Smooth (Standard) 2) SF - One Side Smooth / Other Side Fabric Finish 3) FF - both Side Fabric Finish |
| Manufacturing Tolerance | ±10% on thickness, ±5% on length, ±2% on width. |
| Note | Sheets can be supplied with fabric insertion in cotton, nylon, polyester, glass fibre etc. |
|---|
| Minimum OrderingInformation Required | • Dimension (Length x Width x Thickness) • Application/End Use • Working Temperature in °C • Tensile Strength & Elongation at Break • Hardness • Specific Gravity • Oil Swell • Grade/Purity • Colour • Surface Finish • Total Quantity Required |
|---|
The data on this page represent typical values. Since application variables are a major factor in product performance, this information should serve only as a guideline. We assume no obligation or liability for use of this information. Unless we agree otherwise inwriting, we make no warranties, express or implied, and disclaim all implied warranties. We shall not be liable for any special, incidental or consequential damages. We reserve the right to change product design and properties without notice.
Download PDF
Insertion Rubber Sheets are manufactured out of natural rubber (also available SBR Rubber Blend) with one or more layers of fabric reinforcement. This provides an inscreased tensile strength and tear resistance over standard commercial rubber sheeting. They are resistant to water, moderate acids, alkalis and salts. However, they are not recommended for use in areas coming in contact with oils and hydrocarbons.
It is available in various thickness ranging from 1.5mm to 6mm. We also offer insertion rubber sheet with BIS marking (ISI markes) under CM/L No. 5022540 on the product. BIS License copy and other documents are available on request.
Applications/Use :
Also Available in :
Details
| Product Code | Specific Gravity (gm/cm3) | Hardness (+/- 5° Shore A) |
Tensile Strength (min. Kg/cm2) | Elongation at Break (min. %) | Abrasion (Max. mm3) | Compression Set at 70°C for 22hrs (%) | Temp. Range (°C) |
|---|---|---|---|---|---|---|---|
| INS 18070C | 1.8 | 70 | 15 | 150 | ---- | ---- | -10 to +20 |
| INS 15065S | 1.5 | 65 | 40 | 200 | ---- | ---- | -10 to +20 |
| INS 12065P | 1.2 | 65 | 160 | 550 | 150 | 35 | -30 to +70 |
| INS CD(Custom) | 1.20 to 1.80 | 60 to 75 | 15 to 180 | 150 to 600 | ---- | 30 to 55 | -30 to +70 |
| Standard Sizes |
1) 1000mm Wide x 6-10Metres Length (Calender Finish) 2) 1.0 Mtr. Wide x 2.0 Mtr. Long (Press Finish) |
|---|---|
| Custom Size | Max. width upto 2400mm, length upto 20M and thickness from 1mm to 100mm available on request (Press Finish) |
| Standard Colour | Off-white (Black, Red,Blue & other colours available on request subject to availability.) |
| Surface Finish | 1) SS - Both Side Smooth (Standard) 2) SF - One Side Smooth / Other Side Fabric Finish 3) FF - both Side Fabric Finish |
| Manufacturing Tolerance | ±10% on thickness, ±5% on length, ±2% on width. |
| Note | Sheets can be supplied with insertion other than cotton like nylon, polyester, glass fibre etc. |
|---|
| Minimum OrderingInformation Required | • Dimension (Length x Width x Thickness) • Application/End Use • Working Temperature in °C • Tensile Strength & Elongation at Break • Hardness • Specific Gravity • Abrasion Resistance • Colour • Surface Finish • No. of Plies Required • Grade (Commercial or ISI Marked) • Total Quantity Required |
|---|
The data on this page represent typical values. Since application variables are a major factor in product performance, this information should serve only as a guideline. We assume no obligation or liability for use of this information. Unless we agree otherwise inwriting, we make no warranties, express or implied, and disclaim all implied warranties. We shall not be liable for any special, incidental or consequential damages. We reserve the right to change product design and properties without notice.
Download PDF
Natural Rubber is derived from latex liquid extracted from rubber plantations. It has excellent mechanical properties, low compression set and high resilience. It is very flexible and highly resistant to cut, tear and abrasion. It has an operating temperature range of -30°C to +70°C and is available in hardness ranging from 30° to 80° Shore A.
They are resistant to water, most acids, alkalis and salts. However, they are not recommended for use in areas coming in contact with oils and hydrocarbons. They can be compounded to achieve superior abrasion resistance for use as anti-abrasion lining specially for mining applications. Rubber sheets with smooth or fabric surface finish (one or both sides) and one or more piles of fabric insertion can be provided on request.
Applications :
Natural Rubber Sheets - Commercial & Standard Grade
| Product Code | Specific Gravity (gm/cm3) | Hardness (+/- 5° Shore A) |
Tensile Strength (min. Kg/cm2) |
Elongation at Break (min. %) | Abrasion (Max. mm3) | Compression Set at 70°C for 22hrs (%) | Temp. Range (°C) |
|---|---|---|---|---|---|---|---|
| NR 16070C | 1.6 | 70 | 15 | 150 | --- | --- | -10 to +70 |
| NR 16060C | 1.6 | 60 | 20 | 175 | --- | --- | -10 to +70 |
| NR 14570S | 1.45 | 70 | 40 | 200 | 450 | 55 | -30 to +70 |
| NR 14565S | 1.45 | 65 | 50 | 250 | 450 | 55 | -30 to +70 |
| NR 14555S | 1.45 | 55 | 50 | 275 | 400 | 55 | -30 to +70 |
| NR 14545S | 1.45 | 45 | 70 | 300 | 350 | 55 | -30 to +70 |
Natural Rubber Sheets - Pure/Special & Custom Grade
| Product Code | Specific Gravity (gm/cm3) | Hardness (+/- 5° Shore A) |
Tensile Strength (min. Kg/cm2) |
Elongation at Break (min. %) | Abrasion (Max. mm3) | Compression Set at 70°C for 22hrs (%) | Temp. Range (°C) |
|---|---|---|---|---|---|---|---|
| NR 12070P | 1.2 | 70 | 160 | 350 | 200 | 35 | -10 to +70 |
| NR 12065P | 1.2 | 65 | 150 | 500 | 200 | 35 | -10 to +70 |
| NR 12055P | 1.2 | 55 | 150 | 550 | 175 | 35 | -30 to +70 |
| NR 11045P | 1.1 | 45 | 150 | 600 | 150 | 35 | -30 to +70 |
| NR 11040P | 1.1 | 40 | 150 | 650 | 150 | 35 | -30 to +70 |
| NR CD(Custom) | 1.10 to 2.00 | 30 to 80 | 15 to 240 | 150 to 750 | 100 to 500 | 30 to 55 | -30 to +70 |
Abrasion Resistant Rubber Sheets
| Product Code | Specific Gravity (gm/cm3) | Hardness (+/- 5° Shore A) |
Tensile Strength (min. Kg/cm2) |
Elongation at Break (min. %) | Abrasion (Max. mm3) | Compression Set at 70°C for 22hrs (%) | Temp. Range (°C) |
|---|---|---|---|---|---|---|---|
| AR 14065S | 1.4 | 65 | 50 | 250 | 250 | 35 | -30 to +70 |
| AR 14055S | 1.4 | 55 | 70 | 300 | 225 | 35 | -30 to +70 |
| AR 14045S | 1.4 | 45 | 70 | 350 | 200 | 35 | -30 to +70 |
| AR 12065P | 1.2 | 65 | 170 | 500 | 150 | 30 | -30 to +70 |
| AR 12060P | 1.2 | 60 | 160 | 550 | 150 | 30 | -30 to +70 |
| AR 11555P | 1.15 | 55 | 150 | 600 | 125 | 30 | -30 to +70 |
| AR 11045P | 1.1 | 45 | 150 | 650 | 100 | 30 | -30 to +70 |
| AR 11040P | 1.1 | 40 | 150 | 700 | 100 | 30 | -30 to +70 |
Shot Blasting Rubber Sheets
| Product Code | Specific Gravity (gm/cm3) | Hardness (+/- 5° Shore A) |
Tensile Strength (min. Kg/cm2) |
Elongation at Break (min. %) | Abrasion (Max. mm3) | Compression Set at 70°C for 22hrs (%) | Temp. Range (°C) |
|---|---|---|---|---|---|---|---|
| SB 14555S | 1.45 | 55 | 80 | 300 | 250 | 40 | -30 to +70 |
| SB 14545S | 1.45 | 45 | 80 | 350 | 250 | 40 | -30 to +70 |
| SB 12055P | 1.2 | 55 | 120 | 450 | 150 | 35 | -30 to +70 |
| SB 12045P | 1.2 | 45 | 120 | 500 | 150 | 35 | -30 to +70 |
Shot Blasting Rubber Sheets
| oduct Code | Specific Gravity (gm/cm3) | Hardness (+/- 5° Shore A) |
Tensile Strength (min. Kg/cm2) |
Elongation at Break (min. %) | Abrasion (Max. mm3) | Compression Set at 70°C for 22hrs (%) | Temp. Range (°C) |
|---|---|---|---|---|---|---|---|
| SK 15065S | 1.5 | 65 | 50 | 250 | 250 | 45 | -30 to +70 |
| SK 15055S | 1.5 | 55 | 50 | 275 | 250 | 45 | -30 to +70 |
| SK 15045S | 1.5 | 45 | 50 | 300 | 250 | 45 | -30 to +70 |
| SK 12065P | 1.2 | 65 | 80 | 350 | 200 | 40 | -30 to +70 |
| SK 12055P | 1.2 | 55 | 80 | 375 | 200 | 40 | -30 to +70 |
| SK 12045P | 1.2 | 45 | 80 | 400 | 175 | 40 | -30 to +70 |
| Standard Sizes | 1) 1000mm Wide x 6-10Metres Length (Calender Finish)2) 1.0 Mtr. Wide x 2.0 Mtr. Long (Press Finish) |
|---|---|
| Custom Size | Max. width upto 2400mm, length upto 20M and thickness from 1mm to 100mm available on request (Press Finish) |
| Standard Colour | Off-white (Black, Red,Blue & other colours available on request subject to availability.) |
| Surface Finish | 1) SS - Both Side Smooth (Standard) 2) SF - One Side Smooth / Other Side Fabric Finish 3) FF - both Side Fabric Finish |
| Manufacturing Tolerance | ±10% on thickness, ±5% on length, ±2% on width. |
| Note | Sheets can be supplied with fabric insertion in cotton, nylon, polyester, glass fibre etc. |
|---|
| Minimum OrderingInformation Required | • Dimension (Length x Width x Thickness) • Application/End Use • Working Temperature in °C • Tensile Strength & Elongation at Break • Hardness • Specific Gravity • Abrasion Resistance • Colour • Surface Finish • Total Quantity Required |
|---|
The data on this page represent typical values. Since application variables are a major factor in product performance, this information should serve only as a guideline. We assume no obligation or liability for use of this information. Unless we agree otherwise inwriting, we make no warranties, express or implied, and disclaim all implied warranties. We shall not be liable for any special, incidental or consequential damages. We reserve the right to change product design and properties without notice.
Download PDF
Chloroprene Rubber commonly known as “Neoprene” is manufactured using the synthetic polymer chloroprene or chloro-butadiene. It is an extremely versatile synthetic rubber with proven performance. It has the balanced combination of properties that makes it the best multi-functional rubber sheet.
It has great mechanical and good abrasion properties. It is resistant to heat, ozone and weathering and has good adhesion to metal. It has an operating temperature range of -30°C to +130°C. It offers good resistance to inorganic hydrocarbons. It can be specially compounded to achieve flame/fire retardance. Various grades of neoprene sheets are available depending upon end use/application.
Application/Use :
Specifications
| Chloroprene Rubber Sheets - Commercial (30%) & Standard Grade S1 (50%) | |||||||
|---|---|---|---|---|---|---|---|
| Product Code | Specific Gravity (gm/cm3) | Hardness (+/- 5° Shore A) |
Tensile Strength (min. Kg/cm2) |
Elongation at Break (min. %) | Oil Swell in ASTM Oil No. 903 (%) | Compression Set at 70°C for 22hrs (%) | Temp. Range (°C) |
| NE 16070C | 1.6 | 70 | 25 | 175 | --- | --- | -25 to +90 |
| NE 16060C | 1.6 | 60 | 25 | 175 | --- | --- | -25 to +90 |
| NE 16050C | 1.6 | 50 | 25 | 200 | --- | --- | -25 to +90 |
| NE 16070S1 | 1.5 | 70 | 60 | 250 | 90 | 50 | -30 to +100 |
| NE 15060S1 | 1.5 | 60 | 60 | 250 | 90 | 50 | -30 to +100 |
| NE 15050S1 | 1.5 | 50 | 60 | 275 | 90 | 50 | -30 to +100 |
| Chloroprene Rubber Sheets - Standard Grade S2 (80%) & Pure Grade (100%) | |||||||
|---|---|---|---|---|---|---|---|
| Product Code | Specific Gravity (gm/cm3) | Hardness (+/- 5° Shore A) |
Tensile Strength (min. Kg/cm2) |
Elongation at Break (min. %) | Oil Swell in ASTM Oil No. 903 (%) | Compression Set at 70°C for 22hrs (%) | Temp. Range (°C) |
| NE 14070S2 | 1.4 | 70 | 100 | 275 | 70 | 45 | -30 to +125 |
| NE 14060S2 | 1.4 | 60 | 100 | 300 | 70 | 45 | -30 to +125 |
| NE 14050S2 | 1.4 | 50 | 100 | 350 | 70 | 45 | -30 to +125 |
| NE 12070P | 1.2 | 70 | 150 | 350 | 55 | 35 | -30 to +130 |
| NE 12060P | 1.2 | 60 | 150 | 400 | 55 | 35 | -30 to +130 |
| NE 12050P | 1.2 | 50 | 150 | 450 | 55 | 35 | -30 to +130 |
| NE CD (Custom) |
1.10 to 1.80 | 40 to 80 | 25 to 180 | 150 to 600 | 50 to 90 | 35 to 55 | -30 to +130 |
| Standard Sizes |
1) 1.2 Mtr. Wide x 10.0 Mtr. Long. 2) 1.0 Mtr. Wide x 2.0 Mtr. Long. |
|---|---|
| Custom Size | Max. width upto 2400mm, length upto 20M and thickness from 1mm to 100mm available on request. |
| Standard Colour | Black (Red, Blue, Off-white & other colours available on request subject to availability.) |
| Surface Finish | 1) SS - Both Side Smooth (Standard) 2) SF - One Side Smooth / Other Side Fabric Finish 3) FF - both Side Fabric Finish |
| Note | 1) Sheets can be supplied with fabric insertion in cotton, nylon, polyester, glass fibre etc. 2)Flame retardance grade available on request. |
|---|
| Minimum OrderingInformation Required | • Dimension (Length x Width x Thickness) • Application/End Use • Working Temperature in °C • Tensile Strength & Elongation at Break • Hardness • Specific Gravity • Grade/Purity • Oil Swell • Colour • Surface Finish • Fire Retardant Properties - If required • Total Quantity Required |
|---|
The data on this page represent typical values. Since application variables are a major factor in product performance, this information should serve only as a guideline. We assume no obligation or liability for use of this information. Unless we agree otherwise inwriting, we make no warranties, express or implied, and disclaim all implied warranties. We shall not be liable for any special, incidental or consequential damages. We reserve the right to change product design and properties without notice.
Download PDF
Additional Information:
Payment Terms : L/C, T/T
Additional Information:
Payment Terms : L/C, T/T
Additional Information:
Payment Terms : L/C, T/T
Silicone Rubber Sheet is made of Silicone Polymer, which are very inert, flexible, soft in touch, light weight & composite. No carbon or toxic chemicals are used in their manufacturing.
It is available in a wide range of hardness from 40° to 80° Shore A and working temperature range of -50°C to +200°C. These sheets retain their electrometric properties at high temperatures and have excellent dielectric properties. These sheets have a high resistance to ozone, oxygen and high intensity ultraviolet radiation and good resistant to oil, greases and a wide range of chemicals, acids & alkalis.
Applications :
Technical Specifications
| Product Code | Specific Gravity (gm/cm3) | Hardness (+/- 5° Shore A) |
Tensile Strength (min. Kg/cm2) | Elongation at Break (min. %) | Compression Set at 70°C for 22hrs (%) | Temp. Range (°C) |
|---|---|---|---|---|---|---|
| SI 15070S | 1.5 | 70 | 50 | 150 | 45 | -50 to +175 |
| SI 15060S | 1.5 | 60 | 50 | 150 | 45 | -50 to +175 |
| SI 15050S | 1.5 | 50 | 50 | 150 | 45 | -50 to +175 |
| SI 15040S | 1.5 | 40 | 50 | 150 | 45 | -50 to +175 |
| SI 13070P | 1.3 | 70 | 70 | 200 | 40 | -50 to +200 |
| SI 13060P | 1.3 | 60 | 70 | 200 | 40 | -50 to +200 |
| SI 13050P | 1.3 | 50 | 70 | 200 | 40 | -50 to +200 |
| SI 13040P | 1.3 | 40 | 70 | 200 | 40 | -50 to +200 |
| SI CD(Custom) | 1.30 to 1.50 | 40 to 80 | 35 to 80 | 150 to 250 | 40 to 45 | -50 to +200 |
| Standard Sizes | 1) 1.2 Mtr. Wide x 10.0 Mtr. Long.2) 1.0 Mtr. Wide x 2.0 Mtr. Long. |
|---|---|
| Custom Size | Max. width upto 1200mm, length upto 10M and thickness from 1.5mm to 100mm available on request. |
| Standard Colour | Red (Black, Blue, White & other colours available on request subject to availability.) |
| Surface Finish | 1) SS - Both Side Smooth (Standard) 2) SF - One Side Smooth / Other Side Fabric Finish 3) FF - both Side Fabric Finish |
| Manufacturing Tolerance | ±10% on thickness, ±5% on length, ±2% on width. |
| Minimum OrderingInformation Required | • Dimension (Length x Width x Thickness) • Application/End Use • Working Temperature in °C • Tensile Strength & Elongation at Break • Hardness • Specific Gravity • Colour • Surface Finish • Total Quantity Required |
|---|
The data on this page represent typical values. Since application variables are a major factor in product performance, this information should serve only as a guideline. We assume no obligation or liability for use of this information. Unless we agree otherwise inwriting, we make no warranties, express or implied, and disclaim all implied warranties. We shall not be liable for any special, incidental or consequential damages. We reserve the right to change product design and properties without notice.
Download PDF
Additional Information:
Payment Terms : L/C, T/T
SBR Rubber Sheets are made from Styrene Butadiene and are often produced by blending with natural rubber. It has excellent mechanial properties, low compression set and high resilience. It is very economical and it can be compounded to provide fine abrasion, wear and tensile quality.
It is available in a wide range of hardness from 30° to 90° Shore A and working temperature range -30°C to +100°C. They have good resistance to acids, alkali and salts but are not recommended for use in areas where it could come in contact with oils and hydrocarbon. It is more resistant to ageing and temperature than Natual Rubber Sheet.
Applications :
Specifications
| SBR Rubber Sheets - Commercial & Standard Grade | |||||||
|---|---|---|---|---|---|---|---|
| Product Code | Specific Gravity (gm/cm3) | Hardness (+/- 5° Shore A) |
Tensile Strength (min. Kg/cm2) |
Elongation at Break (min. %) | Abrasion(Max. mm3) | Compression Set at 70°C for 22hrs (%) | Temp. Range (°C) |
| SBR 16070C | 1.6 | 70 | 15 | 150 | ---- | ---- | -10 to +70 |
| SBR 16060C | 1.6 | 60 | 20 | 175 | ---- | ---- | -10 to +70 |
| SBR 14570S | 1.45 | 70 | 40 | 200 | 450 | 55 | -30 to +70 |
| SBR 14565S | 1.45 | 65 | 50 | 250 | 450 | 55 | -30 to +70 |
| SBR 14555S | 1.45 | 55 | 50 | 275 | 400 | 55 | -30 to +70 |
| SBR 14545S | 1.45 | 45 | 70 | 300 | 350 | 55 | -30 to +70 |
Technical Specifications
| SBR Rubber Sheets - Pure/Special & Custom Grade | |||||||
|---|---|---|---|---|---|---|---|
| Product Code | Specific Gravity (gm/cm3) | Hardness (+/- 5° Shore A) |
Tensile Strength (min. Kg/cm2) |
Elongation at Break (min. %) | Abrasion (Max. mm3) | Compression Set at 70°C for 22hrs (%) | Temp. Range (°C) |
| SBR 12070P | 1.2 | 70 | 160 | 350 | 200 | 35 | -30 to +100 |
| SBR 12065P | 1.2 | 65 | 150 | 500 | 200 | 35 | -30 to +100 |
| SBR 12055P | 1.2 | 55 | 150 | 550 | 175 | 35 | -30 to +100 |
| SBR 11045P | 1.1 | 45 | 150 | 600 | 150 | 35 | -30 to +100 |
| SBR 11040P | 1.1 | 40 | 150 | 650 | 150 | 35 | -30 to +100 |
| SBR CD(Custom) | 1.10 to 2.00 | 30 to 90 | 15 to 200 | 150 to 650 | 100 to 500 | 30 to 55 | -30 to +100 |
| Standard Sizes |
1) 1.2mm Wide x 10.0 Mtr. Long 2) 1.0 Mtr. Wide x 2.0 Mtr. Long |
|---|---|
| Custom Size | Max. width upto 2400mm, length upto 20M and thickness from 1mm to 100mm available on request (Press Finish) |
| Standard Colour | Black (Red, Blue Off-white & other colours available on request subject to availability.) |
| Surface Finish | 1) SS - Both Side Smooth (Standard) 2) SF - One Side Smooth / Other Side Fabric Finish 3) FF - both Side Fabric Finish |
| Manufacturing Tolerance | ±10% on thickness, ±5% on length, ±2% on width. |
| Note | Sheets can be supplied with fabric insertion in cotton, nylon, polyester, glass fibre etc. |
|---|
| Minimum OrderingInformation Required | • Dimension (Length x Width x Thickness) • Application/End Use • Working Temperature in °C • Tensile Strength & Elongation at Break • Hardness • Specific Gravity • Abrasion Resistance • Colour • Surface Finish • Total Quantity Required |
|---|
The data on this page represent typical values. Since application variables are a major factor in product performance,this information should serve only as a guideline. We assume no obligation or liability for use of this information. Unless we agree otherwise inwriting, we make no warranties, express or implied, and disclaim all implied warranties. We shall not be liable for any special, incidental or consequential damages. We reserve the right to change product design and properties without notice.
Download PDF
Additional Information:
Payment Terms : L/C, T/T
Viton Rubber Sheet is manufactured from viton rubber based on hexa-fluoropropylene vinyl-idene fluoride. They have a gleaming and radiant appearance. Allowable variation of thickness is low and all physical indexes are excellent. These are highly appreciated for most demanding industrial applications especially in oil and petroleum refineries, steel works and chemical plants. It is also used in the food industries. With outstanding performance at high temperature these sheets can withstand hard environment’s test. The specific gravity of viton is much higher than other rubber polymers.
The working temperature range is very high from -40°C to +250°C. It offers excellent resistance to aggresive fuels, hydrocarbons, oxidants, chemicals, high heat ageing, high temperature, ozone, vacuum, acid and alkali. It also exhibits good abrasion and tear resistance. However, they are not suitable for use against ethers, ketones and bases.
Applications :
Specifications
| Product Code | Specific Gravity (gm/cm3) | Hardness (+/- 5° Shore A) |
Tensile Strength (min. Kg/cm2) | Elongation at Break (min. %) | Compression Set at 70°C for 22hrs (%) | Temp. Range (°C) |
|---|---|---|---|---|---|---|
| VI 19575S | 1.95 | 75 | 50 | 175 | 45 | -30 to +250 |
| VI 19565S | 1.95 | 65 | 50 | 200 | 45 | -30 to +250 |
| VI CD(Custom) | 1.90 to 2.00 | 50 to 75 | 50 to 80 | 175 to 250 | 45 | -30 to +250 |
| Standard Sizes |
1) 1.2 Mtr. Wide x 10.0 Mtr. Long. 2) 1.0 Mtr. Wide x 2.0 Mtr. Long. |
|---|---|
| Custom Size | Max. width upto 2400mm, length upto 20M and thickness from 1mm to 100mm available on request. |
| Standard Colour | Black |
| Surface Finish | 1) SS - Both Side Smooth (Standard) 2) SF - One Side Smooth / Other Side Fabric Finish 3) FF - both Side Fabric Finish |
| Manufacturing Tolerance | ±5% on thickness, ±3% on length, ±2% on width. |
| Note | Sheets can be supplied with fabric insertion in cotton, nylon, polyester, glass fibre etc. |
|---|
| Minimum OrderingInformation Required | • Dimension (Length x Width x Thickness) • Application/End Use • Working Temperature in °C • Tensile Strength & Elongation at Break • Hardness • Specific Gravity • Nature of Chemical Used • Colour • Surface Finish • Total Quantity Required |
|---|
The data on this page represent typical values. Since application variables are a major factor in product performance, this information should serve only as a guideline. We assume no obligation or liability for use of this information. Unless we agree otherwise inwriting, we make no warranties, express or implied, and disclaim all implied warranties. We shall not be liable for any special, incidental or consequential damages. We reserve the right to change product design and properties without notice.
Download PDF
Hypalon Rubber Sheet CSM are characterized by its extreme resistance to attack by oxygen and ozone and also exhibit excellent weathering and ageing resistance. It is also heat resistant and abrasion resistant. They also exhibit very good tensile and elongation properties.
Hypalon Rubber Sheet CSM have a wide working temperature range of -50°C to +150°C. They are resistant to corrosive chemicals as well as offer moderate resistance to petroleum-oils and fluids. Its most important feature is its resistance to most acids, bases and alkalis. It also has an excellent electrical insulation property as well as flame resistance.
Applications :
Details
| Product Code | Specific Gravity (gm/cm3) | Hardness (+/- 5° Shore A) |
Tensile Strength (min. Kg/cm2) | Elongation at Break (min. %) | Compression Set at 70°C for 22hrs (%) | Temp. Range (°C) |
|---|---|---|---|---|---|---|
| CSM 15070S | 1.5 | 70 | 70 | 350 | 40 | -30 to +110 |
| CSM 15060S | 1.5 | 60 | 70 | 375 | 40 | -30 to +110 |
| CSM 13070P | 1.3 | 70 | 150 | 400 | 35 | -35 to +140 |
| CSM 13060P | 1.3 | 60 | 150 | 400 | 35 | -35 to +140 |
| CSM 13050P | 1.3 | 50 | 140 | 450 | 35 | -35 to +140 |
| CSM CD (Custom) |
1.30 to 1.70 | 50 to 70 | 50 to 150 | 200 to 500 | 30 to 40 | -50 to +150 |
| Standard Sizes |
1) 1.2 Mtr. Wide x 10.0 Mtr. Long. 2) 1.0 Mtr. Wide x 2.0 Mtr. Long. |
|---|---|
| Custom Size | Max. width upto 2400mm, length upto 20M and thickness from 1mm to 100mm available on request. |
| Standard Colour | Black (Other colours available on request subject to availability.) |
| Surface Finish | 1) SS - Both Side Smooth (Standard) 2) SF - One Side Smooth / Other Side Fabric Finish 3) FF - both Side Fabric Finish |
| Manufacturing Tolerance | ±10% on thickness, ±5% on length, ±2% on width. |
| Minimum OrderingInformation Required | • Dimension (Length x Width x Thickness) • Application/End Use • Working Temperature in °C • Tensile Strength & Elongation at Break • Hardness • Specific Gravity • Abrasion Resistance • Colour • Surface Finish • Nature of Chemical Used • Total Quantity Required |
|---|
The data on this page represent typical values. Since application variables are a major factor in product performance, this information should serve only as a guideline. We assume no obligation or liability for use of this information. Unless we agree otherwise inwriting, we make no warranties, express or implied, and disclaim all implied warranties. We shall not be liable for any special, incidental or consequential damages. We reserve the right to change product design and properties without notice.
Download PDF
Additional Information:
Payment Terms : L/C, T/T
Pulley Lagging Rubber Sheet prevents belt slippage and protects from wear and corrosion and reduces material build-up. They also infuence belt tracking positively. They are available with plain, diamond or square profiles, with or without special bonding layer.
They are manufactured from high-grade natural and synthetic rubber specially designed to deisplay excellent abrasion and ozone resistance. They are widely used in various industries for bulk handling and are resistant to adverse weather, temperature and radiation etc. It is vailable in a wide range of hardness from 40° to 70° Shore A and working temperature range of -30°C to +70°C.
Technical Specifications
| Profile | StandardDiamond (S1) | SmallDiamond | LargeDiamond | SquareProfile | |
|---|---|---|---|---|---|
| Diagnol Breadth (mm) | B | 47 | 34 | 82 | 28 |
| Diagnol Length (mm) | L | 27 | 17 | 48 | 28 |
| Gap Between the Profiles (mm) | S | 6 | 6 | 11 | 4.8 |
| Depth of the Profile (mm) | D | 6 | 4.8 | 8 | 4 |
| Minimum Thickness (mm) | T | 10 | 8 | 15 | 8 |
| Product Code | Specific Gravity (gm/cm3) | Hardness (+/- 5° Shore A) |
Tensile Strength (min. Kg/cm2) |
Elongation at Break (min. %) | Abrasion(max. mm3) | Compression Set at 70°C for 22hrs (%) | Temp. Range (°C) |
|---|---|---|---|---|---|---|---|
| PL 16065C | 1.6 | 65 | 25 | 200 | 400 | 55 | -10 to +70 |
| PL 15065S | 1.5 | 65 | 50 | 250 | 250 | 55 | -10 to +70 |
| PL 15055S | 1.5 | 55 | 50 | 275 | 250 | 35 | -30 to +70 |
| PL 12065P | 1.2 | 65 | 150 | 450 | 150 | 35 | -30 to +70 |
| PL 12055P | 1.2 | 55 | 150 | 500 | 150 | 30 | -30 to +70 |
| PL 12045P | 1.2 | 45 | 150 | 550 | 125 | 30 | -30 to +70 |
| PL CD (Custom) |
1.10 to 1.80 | 40 to 80 | 25 to 220 | 175 to 600 | 100 to 500 | 30 to 55 | -30 to +70 |
| Standard Sizes |
1) 1.2 Mtr. Wide x 10.0 Mtr. Long. 2) 1.0 Mtr. Wide x 2.0 Mtr. Long. |
|---|---|
| Custom Size | Max. width upto 2400mm, length upto 20M and thickness from 8mm to 25mm available on request. |
| Standard Colour | Black (Red, Blue, Off-white & other colours available on request subject to availability.) |
| Surface Finish | 1) SS - Both Side Smooth (Standard) 2) SF - One Side Smooth / Other Side Fabric Finish 3) FF - both Side Fabric Finish |
| Note | 1) Soft Bonding layer of 0.8mm (or higher) in different colour available on request. 2) Fire Resistance grade also available on request. |
|---|
| Minimum OrderingInformation Required | • Dimension (Length x Width x Thickness) • Application/End Use • Working Temperature in °C • Tensile Strength & Elongation at Break • Hardness • Specific Gravity • Abrasion Resistance • Design - Plain/Diamond • Size of Diamond • Colour • Surface Finish • Fire Retardant properties - if required • Bonding layer - if required • Total Quantity Required |
|---|
The data on this page represent typical values. Since application variables are a major factor in product performance, this information should serve only as a guideline. We assume no obligation or liability for use of this information. Unless we agree otherwise inwriting, we make no warranties, express or implied, and disclaim all implied warranties. We shall not be liable for any special, incidental or consequential damages. We reserve the right to change product design and properties without notice.
Download PDF
Diaphragm Sheets are special sheets manufactured with high quality nitrile rubber compounds with 1 or 2 piles of Nylon Fabric Insertion for use as diaphragm for oil, LPG and Solvent Resistant Applications. Nylon fabric are provided as reinforcement and the nitrile compounds ensure longer life in oil applications.
Diaphragm Sheets have a working temperature range of -30°C to +120°C. They have medium to high tensile strength, compression set, flexibility and impermeability to gases and is resistant to most inorganic and organic chemical products other than antioxidants agents and chlorine. We do not recommend use with polar liquids like ketones, ethers and amines.
Applications :
Technical Specifications
| Product Code | Specific Gravity (gm/cm3) | Hardness (+/- 5° Shore A) |
Tensile Strength (min. Kg/cm2) |
Elongation at Break (min. %) | Volume Swell at 40°C/22hrs (% max) |
Compression Set at 70°C for 22hrs (%) | Temp. Range (°C) |
|---|---|---|---|---|---|---|---|
| DI 13070S | 1.3 | 70 | 80 | 250 | 25 | 35 | -30 to +110 |
| DI 12060S | 1.2 | 60 | 100 | 300 | 25 | 25 | -30 to +110 |
| DI CD (Custom) |
1.20 to 1.50 | 50 to 75 | 50 to 120 | 200 to 400 | 25 | 25 to 35 | -30 to +110 |
| Insertion Fabric | RFL Dipped Nylon 6, 150 GSM. |
|---|---|
| Breaking Strength | Warp - 150 Kgs. / 5 cm, Weft - 135 Kgs. / 5 cm. |
| Standard Sizes |
1) 1.2 Mtr. Wide x 10.0 Mtr. Long. 2) 1.0 Mtr. Wide x 2.0 Mtr. Long. |
|---|---|
| Custom Size | Max. width upto 1220mm, length upto 20M and thickness from 1mm to 12mm available on request. |
| Standard Colour | Black (Other colours available on request subject to availability.) |
| Surface Finish | 1) SS - Both Side Smooth (Standard) 2) SF - One Side Smooth / Other Side Fabric Finish 3) FF - both Side Fabric Finish |
| Manufacturing Tolerance | ±10% on thickness, ±5% on length, ±2% on width. |
| Note | Sheets can be supplied with fabric insertion in cotton, polyester, glass fibre etc. instead of nylon. |
|---|
| Minimum OrderingInformation Required | • Dimension (Length x Width x Thickness) • Application/End Use • Working Temperature in °C • Tensile Strength & Elongation at Break • Hardness • Specific Gravity • Volume Swell • Colour • Surface Finish • Total Quantity Required |
|---|
The data on this page represent typical values. Since application variables are a major factor in product performance, this information should serve only as a guideline. We assume no obligation or liability for use of this information. Unless we agree otherwise inwriting, we make no warranties, express or implied, and disclaim all implied warranties. We shall not be liable for any special, incidental or consequential damages. We reserve the right to change product design and properties without notice.
Download PDF
