Dural Trims and Profiles Pvt. Ltd.

Perungudi, Chennai, Tamil Nadu

L shaped profile in both PVC is ideally suited for application on floors with tiles marbonite. Floor separator facilitates perfect alignment, setting right offset in sizes of tiles. Also can be used to protect tile outer corners and gives the corner a perfect line.

Inner corner protection profile for inside corners of vertical and horizontal wall& floor surfaces acting as Armour for the inner corners from getting attacked with moss porous formation. Prevents staining of the walls, is acid resistant& limits the usage of grouts & other fillers. These profiles are highly useful in areas where liquid flow is more, preventing staining of the floor area particularly in the operation theatres, high tech kitchens, highly hygiene oriented areas like testing rooms of pharmaceutical companies, research & development laboratories, etc.

The plaster bead used to protect and give a formal shape for gypsum plaster having a plaster depth of 4mm and having a flange width of 30mm .It gives plaster to right alignment and protects the wall plastered corners against damage caused by mechanical stress and impact during and after the construction phase.

Rigid PU profile press mounted type on aluminium base plugged on to damaged area of tile marblegranite. The accidental heavy impacts result in a portion of the surface getting distorted and affected area falls off giving a hollow look to the corners. This leads to either continuing with the breakage, or calls for replacing the damaged portion alone, which in the end will actually result in the renovation of the entire place adding additional expenses & consumption of time. Also this profile forms the role & is the ultimate solution for already damaged corners.

Rigid panel profile-inter locked with Aluminium for horizontal application along the walls, stairways. Prevents greasing of the walls, protects tile/wall surfaces from kerbing damages, keeping them spic & span. Act as a wall protector and support guard Ideally suitable for the reception counter, waiting hall of hospitals etc and along the horizontal wall side of long corridors acting as a wall protector and support guard

The coving profile made out of quality PVC used at the acute inner corner ( floor to wall, wall to wall) acting as the armor for the inner corners from getting attacked with moss/porous formation and prevents the corner from staining. These profiles are highly useful in areas where liquid flow is more will create the possibility of seepage.

The all new alignment profile meant to answer all the woes concerning mismatch of marbonite/marble/mosaic laying. Dividers made of rigid PVC available in grey colour this has the definite answer to a even & well aligned floor giving them their breathing space and aesthetic looks. A divider gives a straight- line finish to the floor surface and lessens the usage of excessive grouts. Also permitting for creating custom made designs on the floor area in the form of penciled lines or a checkered floor giving a new dimension to architectural values.

L shaped profile in both PVC is ideally suited for application on floors with tiles / marbonite. Floor separator facilitates perfect alignment, setting right offset in sizes of tiles. Also can be used to protect tile outer corners and gives the corner a perfect line.

Border profiles available in variety of shades to match with the tile pattern. These profiles can be laid vertically or horizontally in between tiles for creating pattern. A right substitute for ceramic pencil tiles. Available 2.5 metre length and 10mm and 20mm width.

Tile spacers are small pieces polypropylene used to ensure consistent width of the grout joints and holds the tile securely in a place for quick and accurate installation. Avoids propagation of cracks developed to the adjacent tile. Tile spacers more specifically creating the perfect alignment in the floors giving an impeccable straight line finish that adds tons of value on to the aesthetics of the room.

The cover blocks made out of poly propylene material at the recommended sizes as per the building standards and it is necessary to provide an effective cover to the reinforcement to ensure the alignment of reinforcement in structural column or beams.

F Profile (PVC) The trend setter profile for ideal fixing in lengthy plastered area, profile resembles F with trail punches on the extended face that neatly get embedded into the plastered area. Lengthy areas like long corridors, exterior plastering in high rise buildings, auditorium walls tend to develop cracks along the vertical and horizontal sides because of the prevailing extreme tropical weather conditions. The profile act as a breaker in the lengthy areas of plastered walls allowing maximum breathing of walls& keeps retention of heat under control.

The plaster bead used to protect and give a formal shape for gypsum plaster having a plaster depth of 4mm and having a flange width of 30mm .It gives plaster to right alignment and protects the wall plastered corners against damage caused by mechanical stress and impact during and after the construction phase.

Existing corner guard in PVC compatible for plastered and tiled walls used in vertical applications. Sizes available as 25x25mm and 40x40mm. Prevents further propogation of damaged areas.

Powder coated or anodized outer corner edge protection profile The profiles can be laid in vertical & horizontal position as per tile used in the area. The concept of bigger tile giving a larger impact on the room is further vindicated with the corners protected by the heavy duty dell. Rounded finish at the corners prevents any sort of heavy impacts transferring on to the tile when laid vertically because of shifting of materials & so. Looks confirm rigidity and paves way for using the profile horizontally on the steps at the junctions; sometimes these profiles take the brunt of the impacts protecting the tiled area from breaks.

The profile made of Multiple Aluminium sections having inter- locking provisions used as a bumber guard to protect the existing wall surface in a heavy movement area, Also used as bordering profile in Granite wall cladding. Available in anodize and powder coated form Suitable for Hospital corridors and Interiors of Hotels.

Perfect bordering profile made of anodizing/powder coating aluminium the absolute finish and right substitute for ceramic border tile (pencil tile).Improves aesthetics and giving perfect bordering finish to the tiling area.

The clear substitute for conventional methods to arresting the expansion & movements of high rise & lengthy buildings. Expansion movement joints are made of rigid aluminium casing on the outer with interlocking mechanism embedded with flexible Neoprene insertions that act against angular movements like expansion & contraction associated with climatic changes. Neoprene is a synthetic rubber based component added with natural rubber so as to provide its inherent properties of absolving & controlling expansion movements within permissible levels. available in Black and Grey shades.

Expansion joint, The sizes are available and designed as per the structural requirement are in 10x25, 15x25, 20x25, and 50x50mm sizes and standard design profiles are sizes, 25x25, 25x50 others upon request in bulk quantities.(Black/Grey)

We undertake all type of expansion joint treatments with equivalent product matching with the properties.