Our Products
Industrial Machinery
2 Products availableWe offer a complete product range of Multi Mill, Mass Mixer, Contra Mixer and Colloid Mill
The multi mill machine is equipped with multiple swinging blades to reduce the size of material. The multi mill blades have dual sharp edges, knife and a hammer each. The machine is widely used in industries including chemicals, pharmaceuticals, food processing etc. Provided with vibro sifter, tablet coating plan, dust extractor, and spray coating machine, the pharmaceutical multi mill uses blades to cut down the material size with powerful blast of air enclosed in a cylindrical sieve.
Working principleThe stainless steel beaters are powered to rotate within a specific screen. The material enters through the inlet hopper to the processing chamber where it moves fast in horizontal space and finally passes through the screen. The processed material thus passes through the outlet once its is reduced to the desired size. The final output could vary depending on the beaters shape, speed, and screen size.
Salient Features
MODEL | SM-MM-200 |
---|---|
Output * | 50 to 200 Kg/Hour |
Rotor Assembly Diameter | 250 mm Approx. |
Rotor Speed | 750 / 1500 / 2300 / 3000 RPM |
Beaters | 12 Nos. with knife and impact edges and 2 Nos. scraper blades |
Screen dimension | Inner Diameter 265 mm/ Height 140 mm |
Motor | 3 HP/1440 RPM /3 Phase |
Starter | “DOL” with reversible switch |
Material charging height | 1460 + 5 mm. |
Material discharging height | 760 + 5 mm. |
The mass mixer is used specifically for mixing an assembly whereby the mixing stirrer is in horizontal direction. With single speed and simple rotation, the stirrer rotates at a uniform speed. The intimate mixing is thereby achieved of wet materials like, tablet granulation, powder, chemicals, food and confectioners and other materials. With the specialized features, the sticky materials are uniformly mixed inside the mass mixer. Mainly used in pharmaceutical industry, chemicals, food and confectioners. The mass mixer is comprehensively designed to comply with the needs of all these industries with specific contact and non contact parts.
Characteristic Materials
MODEL | DTMM-50 | DTMM-100 | DTMM-150 | DTMM-200 | DTMM-300 | DTMM-500 |
---|---|---|---|---|---|---|
Capacity in Kg | 50 | 100 | 150 | 200 | 300 | 500 |
Brim Volume in Litre | 100 | 200 | 300 | 400 | 600 | 1000 |
Working Volume in Litre | 80 | 160 | 240 | 320 | 580 | 800 |
Stirrer RPM | 30 | 30 | 30 | 30 | 30 | 30 |
Electric Motor H.P. | 3 | 5 | 7.5 | 7.5 | 10 | 15 |
the contra rotary mixer is designed to achieve better mixing and consistent granules at lower operating cost along with higher productivity. It works with full vacuum or pressure and at higher speeds. It is comprehensively jacketed for steam or hot water circulation. It comprises of paddled form blades for movement of material back towards the center of the container. The contra mixer comprises of mainly two blades including that rotate clockwise and anticlockwise simultaneously. There are two different shafts that include, solid and hollow shafts. The vessels are fabricated in a form that it can handle complete vacuum or pressure.
characteristic features
MODEL & DETAILS | CR100 | CR 200 | CR500 | CR1000 | CR 1500 | CR2000 | CR2500 |
---|---|---|---|---|---|---|---|
Gross Cap. Ltrs | 110 | 200 | 500 | 1000 | 1500 | 2000 | 2500 |
Bowl dimensions Dia x ht in mm | Will be provided during ordering | ||||||
Overall dimensions LX WX H in mtrs | |||||||
Total HP* | Will be provided during ordering |
The colloid mill is suitable for cutting down the particle size of a solid or liquid suspended in a liquid. Equipped with hydraulic shear, the colloid mill machine is widely used for creating particles of same size, dispersing, mixing of materials. The colloidal machine has found its wide usage in industries including food & beverages, pharmaceutical, suspensions & emulsion, cosmetics and more. The colloid mill machinery involves stator and rotor in the cylindrical vessels to do shearing for reducing the material size.
Working Principle:The material to be reduced enters the colloidal mill through its inlet hopper. It then passes through the gap created between the rotor and stator. The mill then cuts down the size of the material to the desired level. The process requires the inclusion of heavy liquid to start the shearing process. During the milling process, both the materials are stirred at a high rate while the processed material starts draining out of the outlet. If required, the process can be repeated through its re-circulating pipe assembly.
Salient Features:
MODEL | DTCM - 250 | DTCM -500 | DTCM-1000 |
---|---|---|---|
Output - Litre / Hour | 150 to 1500 | 150 to 2500 | 250 to 5000 |
Drive type Option | Vertical OR Horizontal | Vertical OR Horizontal | Vertical OR Horizontal |
Rotor Speed- RPM | 2800 | 2800 | 2800 |
Hopper Capacity- Litre | 15 Litre | 15 Litre | 25 Litre |
Seal Type | Rubber Silicon | Rubber Silicon | Mechanical |
Partial Size Reduction- Micron | 5 to 10 | 5 to 10 | 5 to 10 |
Electric Motor H.P. | 3 | 5 | 10 |