• Uniform lighting design, Ultra High Contrast
• Strong Fram and stylish design (no. breakage of UV shield).
• Fast turn on speed for UV Lamps

• Double walled chamber, inner made of Stainless steel and outer fabricated out of S.S. / cold rolled mild steel sheets duly finished in attractive powder coat paint.
• Pyramidal lid is also made of stainless steel / Acrylic prevents falling of condensed water droplets on the specimens.
• The inter space between the two walls is tightly packed with special grade glass wool in order to prevent thermal losses.
• Immersion type heater achieves heating.
• Digital temperature controller controls the temperature with an immersion type heater achieves heating.
• The bath is provided with an oscillating tray riding on ball rollers oscillated through a PMDC gear variable speed motor.
• The shaking tray can either hold test tubes or Erlenmeyer flasks of capacity 25 ml, 50 ml, 100 ml, 250 ml, 500 ml or 1000 ml as
• ordered by the users.
• Designed to work on 220/230 volts a/c.
• Temp accuracy ±1ºC controlled by PID digital.
• Supplied complete with one shaking tray, cord and plug, S.S. Pyramid lid with supplied 1 tray but without flask.

Golden Parameters

Water Bath Chamber Dimensions, Capacity and Construction:

• Water bath Chamber Capacity: 2 to 4 liters
• Chamber Construction: Double wall rectangular chamber with mineral wool/solid insulation material filling in between
• Material of Outer Chamber Construction: Epoxy coated/ Powder coated mild steel
• Number of racks provided with Water bath unit: 0
• Number of 75 mm diameter Holes provided: 0

• The machine adopts Variable frequency drive motor,
• microcomputer control, LCD & Digital display, with .
• The automatic rotor recognition to prevent from overspeed.
• There are 40 levels of acceleration and deceleration, and it can store 12 users programs.
• It is easy to replace the rotor with a special elastic fixed method.
• Automatic fault diagnosis, Adopted Imported compressor, CFCfree
• refrigerants, double circuit control for refrigeration and
• heating.
• Programs of RCF can be set up directly.
• We Adopts Import famous variable frequency controller, which
• can control speed accurately and have a long service life.
• The operating parameters can be modified during operation.
• All- steel body, three-layer steel for safety.

• Made of Mild Steel duly powder coated.
• Granite Working Platform.
• High Speed Centrifugal Blowers,
• Front Sash with counter weights.
• Fluorescent illumination lights.
• Water tap and PP sink.
• Provision for gas and air Connection Storage cup board.
• 15/5 Amp Switches and Socket.
• Dual Life Working Area Size 90x60x60 cm.
• Dual Life Working Area Size 120x60x60 cm.
• Dual Life Working Area Size 120x75x75 cm.
• Dual Life Working Area Size 150x75x75 cm.
• Fume Hood (Wooden)

Features

• Made of Ply-Board frame with melamine lamination from outside and epoxy painted from inside.
• Granite Working Platform.
• High Speed Centrifugal Blowers,
• Front Sash with counter weights.
• Fluorescent illumination lights.
• Water tap and PP sink.
• Provision for gas and air Connection Storage cup board,
• 15/5 Amp Switches and Socket
• Dual Life Working Area Size 90x60x60 cm.
• Dual Life Working Area Size 120x60x60 cm.
• Dual Life Working Area Size 120x75x75 cm.

• Modular Design and emendable large enzyme immunoassay system
• Automatic access plate and bracket suitable for manipulator grasping
• Full closed design of optical path system and long-term maintenance free
• Automatic switch door, sampling test, No manual opening
• Centre Location accurate data, good stability and good repeatability
• Number of samples at a time: 40-96
• Availability of external Laser printer: Yes
• Keyboard operation
• Memory Storage capacity for test results as per space of computer

Details:

• Rectangular double walled in construction.
• Temperature range 5ºC above ambient to 95ºC, accuracy ± 2 °C.
• Fitted with immersion type heater, digital temperature controller cum indicator.
• Fitted with circular pump with stirrer to re-circulate water at constant temperature.
• Glass Window provided in the front side for an easy inside view (optional).
• Inter space in between the walls tightly packed with special grade glass wool.
• Top Lid is made of stainless-steel plate and provided with handle.
• Heating elements are chromium plated immersion type.
• Temperature controlled by precision thermostat.
• A Medium speed stirrer with 1/20 HP motor is fitted to the unit for continuous stirring and thus maintaining
• uniform temperature throughout.
• Built in control panel accommodate, indicating lamps, precision thermostat
• On/Off switch, speed regulator to control speed of the stirrer.
• Designed to work on 220/230 volts a/c supply

Details:

• These shakers are ideal for mixing and development of culture, chemical, solvent and various other application.
• The orbital shaker is assembled ion heavy duty mild steel angle and sheet section.
• The drive has Single Excentre and 3 Pin.
• Doubled wall inner S.S. outer mild steel temperature range 5 ºC above ambient to 60 ºC accuracy ± 0.5 ºC controlled by preset dual display electronic digital temp. Controller indicator.
• Double walled chamber, inner made of polished stainless-steel sheets and outer made of cold rolled mild steel sheets with powder coat finish.
• The wall is insulated with special grade glass wool.
• The inner chamber accommodates one no. easily removable Stainless-Steel tray at adjustable height and is also provided with a shaking platform with threaded holes for mounting stainless steel clamps for holding conical flasks from 50 ml to 1000 ml capacity.
• An outer double door with inner full view acrylic door permits inspection of specimens.
• Heating is by imported nichrome wires.
• Temperature is controlled by a Digital Indicator cum controller working in conjunction with PT 100 sensor.
• Powerful air circulator creates positive airflow through the incubator.
• Temperature range to 5ºC to 60 ºC ± 0.5 ºC controlled by preset dual display electronic digital temp. Controller indicator.
• The shaker is driven by a variable DC Motor with variable speed control.
• The speed is indicated RPM Indicator for digital display of speed with preset facility.
• The control panel accommodating, digital controller, pilot indicating lamps, on/off switches, digital RPM Indicator, etc., will be provided at the top of the unit.
• RPM range: 50 to 200 Rpm orbital (25cm) variable speed controlled by digital display RPM controller cum indicator (permanent Magnet DC Motor) complete with stainless steel tray lotus shaped spring action clamps but without conical flask.

Applications:

• Dual Life brings the ultra-high-tech Triple walled Microprocessor controlled, solid-state Orbital Shaking Incubator down to earth
• Specially designed for Orbital Shaking under controlled Incubations ( Temperature required for Tissue Cultures Fermentation Studies, & Ageing Tests., Life science applications & growth studies

Features & Construction

• Robust construction outer chamber is made of Mild Steel duly pre treated & finished with powder coated paint for lasting finish.
• Inner chamber made of STAINLESS STEEL SHEET (304 Grade).
• Fitted with durable coaxial blower for forced air circulation at triple walled back to maintain temperature uniformity in the chamber
• Outer front double walled door is insulated and is fitted with magnetic tape for airtight closing for no temperature loss, provided with lock and key arrangement.
• Fitted with Universal Platform to accommodate interchangeable clamps of assorted sizes for different capacity of flasks.
• Stationery shelves made of Stainless Steel (SS-3G4) for use of the unit as a standard B.O.D. Incubator can be supplied at extra cost.
• Door operated illumination lamp is fitted inside the chamber for easy visibility.
• A full view inner plexi glass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature.
• High grade PUF INSULATION between outer and inner chamber for minimal thermal losses.
• Cooling is done by finned tube evaporator lie in the air circulation path by JSI marked Compressor/Condensing Units CFG free & R-134 a eco friendly refrigerant.
• Heating elements are placed in the path of moving air duly insulated from the body.
• Control panel having all controls and circuitry are housed at the top fitted with Temperature controller cum Indicator Microprocessor based with LED display for Set Value (SV) & Process Value (PV) to select any desired temperature provided with Volt meter on the panel to read the incoming voltage.
• Caster wheel mounted for easy portability,
• Supplied with cord and plug.
• Operating Voltage: 220 Volts AC (50 Hz).

Optional Features:

• LCD Controller with Data Logger : (16 x 2) with optional RS-485 communication ports, cables window based software with inbuilt data recording.
• Communication Port : Communication Port with interface and data cable to download data to your PC.
• Timer : With reverse 0 - 24 hours for regulating hours of light and darkness including, fitting at the top of incubator.
• Shaking Frequency Range : 50 to 300rpm.
• Shaking Motion : By Permanent Magnet DC Drive for continuous operations.
• Lotus Clamp Holders : Made of Stainless Steel (SS-304) (One set supplied as per user configuration)
• Flask Configurations Available (any one set supplied with the unit): 100ml x 49, 150ml x 49, 250ml x 33, 500ml x 24, 1000ml x 15, 2000 ml x 9
• Chamber sterilization : By U.V. germicidal tube.
• Interior Illumination : By fluorescent tubes of for photosynthetic applications
• Regulated Voltage : By Voltage Stabilizer Automatic

• Double walled construction with inner chamber made of stainless-steel SS and outer chamber made of mild steel duly powder coated.
• Solid see thru double walled door and a full view inner plexi-glass door enables
• inspection and monitoring of inner chamber specimens without disturbing the process temperature.
• Keyed door lock for improved security with magnetic door gasket.
• User – oriented design of shelves makes you adjust each space of shelves without difficulty.
• PUF thick insulation to ensure temperature stability & reduced energy
• consumption
• Microprocessor based PID temperature & humidity indicator cum control
• Specially designed controller for audio visual deviation alarm from the preset
• temperature, door open alarm.
• The cooling is effected by a hermetically sealed CFC FREE ECO FRIENDLY COMPRESSOR.
• Designed air flow system ensuring uniform temperature & humidity distribution
• SS water reservoir with immersion type heaters at the bottom provides 40% to
• 95% humidity
• Illumination with the help of fluorescent lamps/tubes accounts for artificial daylight conditions
• 5 levels light control (0%, 25%, 50%, 75% and 100%)
• PT-100 temperature sensor (resolution 0.1°C)
• Capacitive type humidity sensors
• It works on 230V AC.
• Unit mounted on castor wheels for ease of mobility

Details:

• Double walled thermostatically controlled inside made of stainless-steel outer made of S.S. / M.S. duly powder coated.
• Gap between the walls is filled with glass wool.
• Temp range 5 C above room temp to 80ºC with an accuracy ±2ºC.
• Working on 220-volt 50 Hz A.C. supply.

• Modular Design and emendable large enzyme immunoassay system
• Automatic access plate and bracket suitable for manipulator grasping
• Full closed design of optical path system and long-term maintenance free
• Automatic switch door, sampling test,
• No manual opening
• Centre Location accurate data, good stability and good repeatability
• Availability of external Laser printer: Yes
• In built Keyboard operation
• Memory Storage capacity for test results as per space of computer.
• Endpoint method, kinetic method,
• inhibition rate, single/dual wavelength measurement
• Memory Storage capacity for test
• results with patient ID in Professional
• Software which can store 200 groups,
• 1, 00, 000 sample results, >10 type of curve fitting equation
• Visualization of panel and data
• Number of samples at a time: 1-96
• Maximum Reading time/Plate, Single
• wavelength:<6S
• Center location, accurate data, good stability and good repeatability

• Uniform lighting design, Ultra High Contrast
• Strong Fram and stylish design (no. breakage of UV shield).
• Fast turn on speed for UV Lamps

• Double walled chamber, inner made of Stainless steel and outer fabricated out of S.S. / cold rolled mild steel sheets duly finished in attractive powder coat paint.
• Pyramidal lid is also made of stainless steel / Acrylic prevents falling of condensed water droplets on the specimens.
• The inter space between the two walls is tightly packed with special grade glass wool in order to prevent thermal losses.
• Immersion type heater achieves heating.
• Digital temperature controller controls the temperature with an immersion type heater achieves heating.
• The bath is provided with an oscillating tray riding on ball rollers oscillated through a PMDC gear variable speed motor.
• The shaking tray can either hold test tubes or Erlenmeyer flasks of capacity 25 ml, 50 ml, 100 ml, 250 ml, 500 ml or 1000 ml as
• ordered by the users.
• Designed to work on 220/230 volts a/c.
• Temp accuracy ±1ºC controlled by PID digital.
• Supplied complete with one shaking tray, cord and plug, S.S. Pyramid lid with supplied 1 tray but without flask.

Golden Parameters

Water Bath Chamber Dimensions, Capacity and Construction:

• Water bath Chamber Capacity: 2 to 4 liters
• Chamber Construction: Double wall rectangular chamber with mineral wool/solid insulation material filling in between
• Material of Outer Chamber Construction: Epoxy coated/ Powder coated mild steel
• Number of racks provided with Water bath unit: 0
• Number of 75 mm diameter Holes provided: 0

• The machine adopts Variable frequency drive motor,
• microcomputer control, LCD & Digital display, with .
• The automatic rotor recognition to prevent from overspeed.
• There are 40 levels of acceleration and deceleration, and it can store 12 users programs.
• It is easy to replace the rotor with a special elastic fixed method.
• Automatic fault diagnosis, Adopted Imported compressor, CFCfree
• refrigerants, double circuit control for refrigeration and
• heating.
• Programs of RCF can be set up directly.
• We Adopts Import famous variable frequency controller, which
• can control speed accurately and have a long service life.
• The operating parameters can be modified during operation.
• All- steel body, three-layer steel for safety.

• Made of Mild Steel duly powder coated.
• Granite Working Platform.
• High Speed Centrifugal Blowers,
• Front Sash with counter weights.
• Fluorescent illumination lights.
• Water tap and PP sink.
• Provision for gas and air Connection Storage cup board.
• 15/5 Amp Switches and Socket.
• Dual Life Working Area Size 90x60x60 cm.
• Dual Life Working Area Size 120x60x60 cm.
• Dual Life Working Area Size 120x75x75 cm.
• Dual Life Working Area Size 150x75x75 cm.
• Fume Hood (Wooden)

Features

• Made of Ply-Board frame with melamine lamination from outside and epoxy painted from inside.
• Granite Working Platform.
• High Speed Centrifugal Blowers,
• Front Sash with counter weights.
• Fluorescent illumination lights.
• Water tap and PP sink.
• Provision for gas and air Connection Storage cup board,
• 15/5 Amp Switches and Socket
• Dual Life Working Area Size 90x60x60 cm.
• Dual Life Working Area Size 120x60x60 cm.
• Dual Life Working Area Size 120x75x75 cm.

• Modular Design and emendable large enzyme immunoassay system
• Automatic access plate and bracket suitable for manipulator grasping
• Full closed design of optical path system and long-term maintenance free
• Automatic switch door, sampling test, No manual opening
• Centre Location accurate data, good stability and good repeatability
• Number of samples at a time: 40-96
• Availability of external Laser printer: Yes
• Keyboard operation
• Memory Storage capacity for test results as per space of computer

Details:

• Rectangular double walled in construction.
• Temperature range 5ºC above ambient to 95ºC, accuracy ± 2 °C.
• Fitted with immersion type heater, digital temperature controller cum indicator.
• Fitted with circular pump with stirrer to re-circulate water at constant temperature.
• Glass Window provided in the front side for an easy inside view (optional).
• Inter space in between the walls tightly packed with special grade glass wool.
• Top Lid is made of stainless-steel plate and provided with handle.
• Heating elements are chromium plated immersion type.
• Temperature controlled by precision thermostat.
• A Medium speed stirrer with 1/20 HP motor is fitted to the unit for continuous stirring and thus maintaining
• uniform temperature throughout.
• Built in control panel accommodate, indicating lamps, precision thermostat
• On/Off switch, speed regulator to control speed of the stirrer.
• Designed to work on 220/230 volts a/c supply

Details:

• These shakers are ideal for mixing and development of culture, chemical, solvent and various other application.
• The orbital shaker is assembled ion heavy duty mild steel angle and sheet section.
• The drive has Single Excentre and 3 Pin.
• Doubled wall inner S.S. outer mild steel temperature range 5 ºC above ambient to 60 ºC accuracy ± 0.5 ºC controlled by preset dual display electronic digital temp. Controller indicator.
• Double walled chamber, inner made of polished stainless-steel sheets and outer made of cold rolled mild steel sheets with powder coat finish.
• The wall is insulated with special grade glass wool.
• The inner chamber accommodates one no. easily removable Stainless-Steel tray at adjustable height and is also provided with a shaking platform with threaded holes for mounting stainless steel clamps for holding conical flasks from 50 ml to 1000 ml capacity.
• An outer double door with inner full view acrylic door permits inspection of specimens.
• Heating is by imported nichrome wires.
• Temperature is controlled by a Digital Indicator cum controller working in conjunction with PT 100 sensor.
• Powerful air circulator creates positive airflow through the incubator.
• Temperature range to 5ºC to 60 ºC ± 0.5 ºC controlled by preset dual display electronic digital temp. Controller indicator.
• The shaker is driven by a variable DC Motor with variable speed control.
• The speed is indicated RPM Indicator for digital display of speed with preset facility.
• The control panel accommodating, digital controller, pilot indicating lamps, on/off switches, digital RPM Indicator, etc., will be provided at the top of the unit.
• RPM range: 50 to 200 Rpm orbital (25cm) variable speed controlled by digital display RPM controller cum indicator (permanent Magnet DC Motor) complete with stainless steel tray lotus shaped spring action clamps but without conical flask.

Applications:

• Dual Life brings the ultra-high-tech Triple walled Microprocessor controlled, solid-state Orbital Shaking Incubator down to earth
• Specially designed for Orbital Shaking under controlled Incubations ( Temperature required for Tissue Cultures Fermentation Studies, & Ageing Tests., Life science applications & growth studies

Features & Construction

• Robust construction outer chamber is made of Mild Steel duly pre treated & finished with powder coated paint for lasting finish.
• Inner chamber made of STAINLESS STEEL SHEET (304 Grade).
• Fitted with durable coaxial blower for forced air circulation at triple walled back to maintain temperature uniformity in the chamber
• Outer front double walled door is insulated and is fitted with magnetic tape for airtight closing for no temperature loss, provided with lock and key arrangement.
• Fitted with Universal Platform to accommodate interchangeable clamps of assorted sizes for different capacity of flasks.
• Stationery shelves made of Stainless Steel (SS-3G4) for use of the unit as a standard B.O.D. Incubator can be supplied at extra cost.
• Door operated illumination lamp is fitted inside the chamber for easy visibility.
• A full view inner plexi glass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature.
• High grade PUF INSULATION between outer and inner chamber for minimal thermal losses.
• Cooling is done by finned tube evaporator lie in the air circulation path by JSI marked Compressor/Condensing Units CFG free & R-134 a eco friendly refrigerant.
• Heating elements are placed in the path of moving air duly insulated from the body.
• Control panel having all controls and circuitry are housed at the top fitted with Temperature controller cum Indicator Microprocessor based with LED display for Set Value (SV) & Process Value (PV) to select any desired temperature provided with Volt meter on the panel to read the incoming voltage.
• Caster wheel mounted for easy portability,
• Supplied with cord and plug.
• Operating Voltage: 220 Volts AC (50 Hz).

Optional Features:

• LCD Controller with Data Logger : (16 x 2) with optional RS-485 communication ports, cables window based software with inbuilt data recording.
• Communication Port : Communication Port with interface and data cable to download data to your PC.
• Timer : With reverse 0 - 24 hours for regulating hours of light and darkness including, fitting at the top of incubator.
• Shaking Frequency Range : 50 to 300rpm.
• Shaking Motion : By Permanent Magnet DC Drive for continuous operations.
• Lotus Clamp Holders : Made of Stainless Steel (SS-304) (One set supplied as per user configuration)
• Flask Configurations Available (any one set supplied with the unit): 100ml x 49, 150ml x 49, 250ml x 33, 500ml x 24, 1000ml x 15, 2000 ml x 9
• Chamber sterilization : By U.V. germicidal tube.
• Interior Illumination : By fluorescent tubes of for photosynthetic applications
• Regulated Voltage : By Voltage Stabilizer Automatic

• Double walled construction with inner chamber made of stainless-steel SS and outer chamber made of mild steel duly powder coated.
• Solid see thru double walled door and a full view inner plexi-glass door enables
• inspection and monitoring of inner chamber specimens without disturbing the process temperature.
• Keyed door lock for improved security with magnetic door gasket.
• User – oriented design of shelves makes you adjust each space of shelves without difficulty.
• PUF thick insulation to ensure temperature stability & reduced energy
• consumption
• Microprocessor based PID temperature & humidity indicator cum control
• Specially designed controller for audio visual deviation alarm from the preset
• temperature, door open alarm.
• The cooling is effected by a hermetically sealed CFC FREE ECO FRIENDLY COMPRESSOR.
• Designed air flow system ensuring uniform temperature & humidity distribution
• SS water reservoir with immersion type heaters at the bottom provides 40% to
• 95% humidity
• Illumination with the help of fluorescent lamps/tubes accounts for artificial daylight conditions
• 5 levels light control (0%, 25%, 50%, 75% and 100%)
• PT-100 temperature sensor (resolution 0.1°C)
• Capacitive type humidity sensors
• It works on 230V AC.
• Unit mounted on castor wheels for ease of mobility

Details:

• Double walled thermostatically controlled inside made of stainless-steel outer made of S.S. / M.S. duly powder coated.
• Gap between the walls is filled with glass wool.
• Temp range 5 C above room temp to 80ºC with an accuracy ±2ºC.
• Working on 220-volt 50 Hz A.C. supply.

• Modular Design and emendable large enzyme immunoassay system
• Automatic access plate and bracket suitable for manipulator grasping
• Full closed design of optical path system and long-term maintenance free
• Automatic switch door, sampling test,
• No manual opening
• Centre Location accurate data, good stability and good repeatability
• Availability of external Laser printer: Yes
• In built Keyboard operation
• Memory Storage capacity for test results as per space of computer.
• Endpoint method, kinetic method,
• inhibition rate, single/dual wavelength measurement
• Memory Storage capacity for test
• results with patient ID in Professional
• Software which can store 200 groups,
• 1, 00, 000 sample results, >10 type of curve fitting equation
• Visualization of panel and data
• Number of samples at a time: 1-96
• Maximum Reading time/Plate, Single
• wavelength:<6S
• Center location, accurate data, good stability and good repeatability