Salient Features

• 20MHz at 5mV, for each channel.
• X-Y operation at 5 mV sensitivity.
• 200 mV peak-to-peak calibrator.
• Dual triggering, component testing facility & trace rotation.

Salient Features

• Sine/square & single-shot square wave forms available in one model.
• Waveform distortion is better than 1% & electronically regulated output amplitude.
• Useful for digital IC & microprocessor bit testing.
• In-built DC regulated power supply to enhance the versatility of instrument.

The range consists of

• Regularly used power supplies like 30V/ 2A, 60V/ 5A & 300V/ 100mA etc.
• DC/DC converter based power supplies used for I/O modules. They have an internal provision to send digital control signals prior to enable the modules & check the system.
• SMPS power supplies.
• Special 3.5KV/ 25uA power supplies used for vacuum chambers to ionize the air.
• Custom-built power supplies.

Function

The Under/Over Voltage Monitoring Relay monitors the system voltage continuously. In case of system voltage drop/rise below/above the set actuating limit, the electromechanical relay in the device toggles its state.

Application

Electronic overload relay is suitable for AC 50/60Hz, voltage up to 600VAC and currentup to 60A. It is used as Overload and Phase Loss Protection device. It has independently adjustable STARTING and TRIP delay (O-TIME, D-TIME), Visual Current Setting Dial, Trip Indication, Fail Safe Protection (N type) and Electronic Shear Pin function. The product conforms to IEC60947-1 standard.

Salient Features

• 20MHz at 5mV, for each channel.
• X-Y operation at 5 mV sensitivity.
• 200 mV peak-to-peak calibrator.
• Dual triggering, component testing facility & trace rotation.

Salient Features

• Sine/square & single-shot square wave forms available in one model.
• Waveform distortion is better than 1% & electronically regulated output amplitude.
• Useful for digital IC & microprocessor bit testing.
• In-built DC regulated power supply to enhance the versatility of instrument.

The range consists of

• Regularly used power supplies like 30V/ 2A, 60V/ 5A & 300V/ 100mA etc.
• DC/DC converter based power supplies used for I/O modules. They have an internal provision to send digital control signals prior to enable the modules & check the system.
• SMPS power supplies.
• Special 3.5KV/ 25uA power supplies used for vacuum chambers to ionize the air.
• Custom-built power supplies.

Function

The Under/Over Voltage Monitoring Relay monitors the system voltage continuously. In case of system voltage drop/rise below/above the set actuating limit, the electromechanical relay in the device toggles its state.

Application

Electronic overload relay is suitable for AC 50/60Hz, voltage up to 600VAC and currentup to 60A. It is used as Overload and Phase Loss Protection device. It has independently adjustable STARTING and TRIP delay (O-TIME, D-TIME), Visual Current Setting Dial, Trip Indication, Fail Safe Protection (N type) and Electronic Shear Pin function. The product conforms to IEC60947-1 standard.