drexel Group

Rajpura, Rajpura, Punjab

We specialize in providing Hydro Power Plant Commissioning solutions taking care of everything from water to wire, from individual equipment to complete turn-key solutions according to the requirements of the project. Our experienced and committed team supervises and solves every problem during the plant’s complete life cycle. Moreover, we also modernize the existing plants. Receive the Hydro Power Plant Commissioning Service at your door steps at affordable prices by contacting us! We are the renowned Service Provider from Chandigarh (India).

BASIC SPECIFICATIONS: MODEL NO. : ST35N-ATCYEAR OF MFG.: 1986CHIP CONVEYOR16 Tool ATC12 inch ChuckMore technical details on request

The Incinerator System, provided by us, is manufactured using the advanced technology. Strict payment procedures are followed by us keeping in mind that no third party is involved in this; rely on us and we will offer you to make payments online or offline keeping all your details safe and secured. The company shares glorious credentials with the eminent Suppliers of Incinerator System and offers the best deals.

We are an eminent firm affianced in offering an extensive range of CNC Laser Cutting Machines in India in running condition. Description:Make : Prima, ItalyModel : Platino 2040Laser Convergent Germany Power : 4000 WYear : 2010Specifications:X-Axis : 4065 mmY-Axis : 2035 mmZ-Axis : 135 mm

We have gained specialization in manufacturing and supplying of tailor-made Hydro Power Systems reckoned for uninterrupted power generation across India. At par with the international quality standards, the Hydro Power Systems offer exceptionally high efficiency and reliability. They are total value for money! Contact us to get it installed. Our swiftness in offering Hydro Power Systems adds value to the superior quality of products.

Highlights :

• The Hydro Power Systems range in size from 200 KW to 30 MW, with turbines for a wide range of flows and heads.
• We also provide load controllers to maintain proper voltage at either 50Hz or 60Hz and can also supply custom pipes, valves (manual & automatic) and adapters for unique applications.
• Single phase, three phase and DC options are all available.
• The turbines offered can be for off-grid use or grid tied systems.

 

Land Acquistion :Drexel has identified many sites which have a capacity ranging from 1 MW up to 15MW, which falls under Himurja project of Himachal State. All these sites have good water flow and an above elevation for the penstock, surge tank and stable flat land for the turbine housing to be built on. In accordance with regulations for initial purchase of leasehold land, the sites are owned by companies with a 40 years lease. The shareholders of the companies have agreed to transfer ownership to Drexel in accordance with regulations; this is a 3 step process with no Government objection as the land is leasehold :

• Initial payment to the shareholders and Drexel assumes management control. Current Directors resign
• Final payment (after 4 months)
• Change in shareholding

Economics :

• On an average a turbine of 1 Mw is capable to produce electricity worth 24000 units per day. Price per unit as per the Himachal government is 3.25 Rs/ Per Unit. Apart from this 40 Paise/ per Unit is given by the central government against Carbon Footprints.
• So for a day calculation would be: 24000Units X (2.95+0.40) = 80400/- Rs. per day
• For a month it would be 80400 X 30 = 2412000/- Rs
• For realistic calculations the generation is accounted for only 10 months since 15 days are required for annual maintenance and for 45 days in winters the flow of water is very less.
• The annual generation is about 2412000 X 10 = 2, 41, 20000/- Rs.
• Payback period of the complete project shall be maximum 4 years.
• Government gives subsidy of 2Cr on first Mw and 30 lacs on every subsequent MW up to a maximum of 25 MW. Total completion time of the project shall be 12 to 14 months. Time allowed by government is 30 months. Any period less than 30 months is referred as Golden period since government royalty, which is 6% is not charged during this period.
• Approximate cost of the project per MW varies between 5 to 6 Cr depending upon the site/location of the project.
• Most viable projects are between 3 to 5 MW.
• An investor has to bear 25% of the cost, which covers cost of the land and machineries. Rest of the project is financed by the bank, mostly SBI or PNB. Payments from Himachal State government are safe as there is a tripartite agreement between Government, Company and the bank. In case there is any delay in the payment government will pay the interest to company and its bank.

 

Clearances :

• Technical economic clearance by HPSEB Board
• Central Electricity Authority clearance
• Environmental clearance by Ministry of Environment & Forests
• First award by land acquisition officer
• No-Objection Certificate (NOC) by the Himachal Pradesh Environment
• Protection and Pollution Control Board. Other NOCs as may be required – Great Himalayan National Park, I & PH Department, Wild Life
• Forest clearance by Ministry of Environment & Forests

Operational Plan :

• Complete equity (investment) raising (refer Cash Flow Statement)
• Secure Management control of the Himachal company
• Obtain required clearances
• Obtain sales contract from Himachal Government
• Obtain electro mechanical equipment from suppliers
• Commence infrastructural (civil) works at the site – turbine house, steel pipeline, penstock and surge tanks
• Installation of OCB ( outdoor circuit breaker), transformer, substation and all wiring
• Complete civil and OCB works, assemble turbine and commence Operations

Based in Chandigarh, we are CNC Retrofittings (Laser Cutting) solutions. Also called HOB & Roll Sharpening Machines. We have on board a team of dexterous professionals, who have numerous years of experience in this domain. The services rendered by us include mechanical re-fitment, replacement of laser units, replacement of CNC systems & height sensor assemblies as per client’s requirements.  We also provide conversion of conventional hob sharpening and roll sharpening machines into CNC controlled machines. The complete sharpening program is automatic and the job is finished in one go. Our team renders the services using advanced tools and machinery.

GPS location of all the vehicles moving right from the starting point of plant, collection points and till return to the plant shall be displayed and recorded.
The system is very simple and effective which shall revolve around mobile phone being carried by driver of each vehicle going out for collection and shall effectively operate as multiple device performing as GPS device, barcode/QR code scanning, data storage of weighing scale (through Bluetooth) recorded at collection points and transmitting online data to the base station computer located in plant and server. The mobile phone shall not have any phone dialing or receiving

Our Clients For Bio Medical Waste Management Software:

• UP Health services
• Indira Gandhi Institute Of Medical Science Patna
• MPCC Rurkee
• Superb Hygiene Disposal Chandrpur
• Envira Medicare Pvt. Ltd. Bareily
• Global Enviromental solution Rudrapur
• Suraksha Bio Senitizer Kangra
• Saini clean Pvt. Ltd. Bhuvneshwar
• Superb Hygiene Disposal

Similar to the medical application, the autoclaves used in Bio Medical Waste Treatment Systems are steam fired based and of horizontal cylindrical type. Loaded with the same safety and salient features as the medical ones are, this machine is built for the more rough usage in the waste treatment setups.

Being a highly quality oriented firm, we are engaged in manufacturing and supplying a superior quality Industrial Automation System. This product is extensively used in agricultural, textile, pharmaceutical and food industry. The offered product is manufactured with the help of our diligent professionals. Accessible in different specifications, this Industrial Automation System is checked on performance and efficiency parameters. This is known for its attributes like easy installation, maintenance free and highly efficient. We offer this product at industry leading prices and deliver to buyers within the given time frame.

*Online Calibration*Suitable for Suspended particulate*Suitable for CO, CO2, O2, NOX, SOX, LPG, *As Per CPCB Norms

The series PM 1000 suspended particulate monitor sensor is reliable dust collector emission and leak detector. The sensor connects directly to PLCs or other system which accepts 4-20 mA. Further the adjustable liner output scaling enables  both the baseline and peak emissions that are caused by filter cleaning cycles.Alarm setting possible at any predefined value.
      The PM1000 works on field proven combination of induction and protected-prove technologies. As particles flow near and around the sensor probe , minute currents are dynamically included into the probe (Tribo-Electric Charge). The signal gets converted into an absolute output relative to the amount of particulate. Protective layers over prove work in combination with introduction sensing to ensure reliable operation with all types of particulate including moist powder sand highly conductive dusts. Maintenance is minimal and there is no need for an air purge.

Application:> Filter failure alarm in particulate arresting systems (optional)>Stack Guard specially designed for broken bag detection in exhausted duct of bag houses, cartridge collectors, cyclones, and any other collector containing filter which break or wear out it finds extensive application in following industries:

• Ferrous metal
• Non ferrous metal
• Cement
• Textile industries
• Chemical processing
• Pharmaceutical
• Food processing
• Iron & steel
• Sugar
• Dyeing & dyeing intermediate
• Zinc
• Paper plants 
• And Others

Features:

• Easy to install with no moving part
• Easy maintenance and low capital and maintenance cost
• Can be calibrated to show emission levels in mg/nm3
• adjustable range from 1-1000 mg/nm3
• Minimum Detection limit less than 1mg/nm3
• Built in operational diagnostics

We offer vertical and horizontal autoclaves up to 1000 liter capacity specially designed for biomedical plants applications. The inner chamber and outer jacket are of stainless steel and top surface, dully insulated and covered with the stainless steel. The autoclaves with smart features including touch screen programming of sterilization, cycle temperature settings, online pressure and temperature monitoring and also optional feature includes automatic door closing and opening SMS feature for sending messages for batch number, sterilization cycle, temperature etc.

We manufacture Online Pollution Monitoring system strictly as per the guidelines of Central Pollution Control Board in India. This system has the following features: Description:*System is suitable for Stack/in Process monitoring of gases mainly CO, Co2, O2, NOx, HCL, He, LPG, Methane and SO2 along with SPM (suspended particle) mainly for stack*Inbuilt PC and Software is offered, which connects directly for online status transmission as per the requirement of CPCB and state government pollution control departments.*Remote calibration facility available as optional feature.*Data storage for upto 3 months on server and data retrieval from server for upto 1 year.*Complete system works on standard UPS.*Online support available for fault rectification.*No need of dedicated internet connection. Data can be transmitted to server by mobile phones also.*Delivery within Two weeks and installation in 24 hours anywhere in India.

By keeping in mind quality as the topmost concern, we procure raw materials only from the well-known sources present in the market. Thus, we ensure high-grade products to the clients. Being a quality-conscious firm, we consider all the stated quality norms for ensuring that optimum quality products reach the buyers.

Buyers can rely on our products, as they conform to international quality norms and are trustworthy. We are one of the respected names in the market of Rajpura(India) and are offering amazing deals on our products.