Our Products
Fiber Optic Cables
2 Products availableAudio Video System
2 Products availableWires
2 Products availableWe are leaders in the market for providing best range of Armored Patch Cords, SC Patch Cords, Fc Patch Cords, ST Patch Cords and LC Patch Cords
DNC Armoured fiber optic patch cord can be laid in all kinds of environmental extremes. lt is used without protection tube which saves space and is quite convenient for maintenance . Also it has the construction including stainless steel tube which protects optical fiber and provide better security for the Whole system.
The quality, reliability, and performance ofArmored Patch Cordsare assured by selecting the best components and by terminating and polishing with the best equipment and procedures . The quality of patch cords is governed by industry specifications. We assure that the components and manufacturing procedures can produce the proper quality level of patch cords.
Features And Advantages:
It is Push-Pull type fiber optic Connector. It features low cost, simplicity, and high durability. SC fiber optic patch cord has an advantage in keyed duplexibility to supports end /receive channels.
DNC provide a test certificate for each terminated product. Each patch cord/pigtail must have a unique Serial Number. This certificate shall confirm the terminated product meets the requirements of this specification and shall provide measured data.
Available Fibers |
|
Available Cables |
|
Available Colors | Yellow, Orange, Blue, Black, Aqua, Purple |
Available Connectors | SC –SC, SC-LC, SC-ST, SC-FC, SC-MU, SC-DIN, SC-E2000, SC-MTRJ |
Connector End | PC, UPC, APC |
Available Length | 1 mtr , 2 mtr , 3mtr , 4 mtr ……………………….etc |
FC patch cords are with FC optical connectors, which is a screw type connection. FC connectors were designed for use in high-vibration environments. The FC fiber optic patch cord is very popular which are used in many area of the communications applications, Recently FC fiber optic patch cord are being replaced by SC and LC fiber optic patch cord.
DNC provide a test certificate for each terminated product. Each patch cord/pigtail must have a unique Serial Number. This certificate shall confirm the terminated product meets the requirements of this specification and shall provide measured data.
Available Fibers |
|
Available Cables |
|
Available Colors | Yellow, Orange, Blue, Black, Aqua, Purple |
Available Connectors | ST-ST, ST-SC, ST-LC, ST-FC, ST-MU, ST-DIN, ST-E2000, ST-MTRJ |
Connector End | PC, UPC |
Available Length | 1 mtr , 2 mtr , 3mtr , 4 mtr ……………………….etc |
ST Fiber Patch Cord Connector has a Bayonet-Style housing and a long spring loaded ferrule holding the fiber. The ST Fiber Patch cord is one of the oldest generations of connectors, but still widely used for Multi-mode networks, including LANs for building and Campuses.
DNC provide a test certificate for each terminated product. Each patch cord/pigtail must have a unique Serial Number. This certificate shall confirm the terminated product meets the requirements of this specification and shall provide measured data.
Available Fibers |
|
Available Cables |
|
Available Colors | Yellow, Orange, Blue, Black, Aqua, Purple |
Available Connectors | ST-ST, ST-SC, ST-LC, ST-FC, ST-MU, ST-DIN, ST-E2000, ST-MTRJ |
Connector End | PC, UPC |
Available Length | 1 mtr , 2 mtr , 3mtr , 4 mtr ……………………….etc |
OPTICAL PERFORMANCE | SINGLE MODE | MULTIMODE |
Insertion Loss | ≤ 0.20 dB | ≤0.30 dB |
Return Loss | ≥ 45 dB ( PC)
≥ 50 dB ( UPC ) ≥ 60 dB ( APC ) |
—- |
Repeatability | ≤ 0.10 dB | |
Durability | ≤ 0.2 dB Typical Change , 1000 Matings | |
Operating Temperature | - 20 ~ +75 °C | |
Storage Temperature | - 40 ~ +85 °C |
LC fiber optic patch cord is with LC fiber optic connector, which is a push and latch structure. LC connector has a s mall form-factor Fiber optic connector, is widely used for densely installation. The LC Patch cord connector has zirconia ceramic ferrule measuring 1.25mm O.D with either a PC or APC end face , and provides optimum insertion and return loss.
DNC provide a test certificate for each terminated product. Each patch cord/pigtail must have a unique Serial Number. This certificate shall confirm the terminated product meets the requirements of this specification and shall provide measured data.
Available Fibers |
|
Available Cables |
|
Available Colors | Yellow, Orange, Blue, Black, Aqua, Purple |
Available Connectors | LC-LC, LC-SC, LC-ST, LC-FC, LC-MU, LC-DIN, LC-E2000, LC-MTRJ |
Connector End | PC, UPC, APC |
Available Length | 1 mtr , 2 mtr , 3mtr , 4 mtr ……………………….etc |
OPTICAL PERFORMANCE | SINGLE MODE | MULTIMODE |
Insertion Loss | ≤ 0.20 dB | ≤0.30 dB |
Return Loss | ≥ 45 dB ( PC)
≥ 50 dB ( UPC ) ≥ 60 dB ( APC ) |
—- |
Repeatability | ≤ 0.10 dB | |
Durability | ≤ 0.2 dB Typical Change , 1000 Matings | |
Operating Temperature | - 20 ~ +75 °C | |
Storage Temperature | - 40 ~ +85 °C |
MPO Patch Cords are multi- fiber cables using single MPO connectors 0f 6, 8, 12 and 24 that are used to interconnect pre -terminated devices. MPO patch cords are available in single- mode and multimode version. The MPO assemblies are suitable for high density back panel and printed circuit board (pcb) solutions in data and telecom systems providing significant space and cost savings. Precision molded thermoplastic MT ferrules together with metal guide pins and precise housing dimensions ensure fiber alignment when mating. Push pull latching mechanism with audible click ensures proper connection.
The MPO system are available with a range of performance levels ( om3, enhanced om3 or 0s1 types) and in different types. Tight buffered cables for duplex links in general office & data center environments, loose tube for duplex connections in data centers and ribbon style for direct connection to array transceivers in equipment in data centers.
Available Fibers | Single mode : 9/125µmMultimode : OM1, OM2, OM3, OM4 |
Available Fibers | 12/24/36/48/72/96/144 |
Available Colors | Yellow, Orange, Aqua, Purple |
Connector End | PC, UPC, APC |
Available Length | 1 mtr , 2 mtr , 3mtr , 4 mtr ……………………….etc |
SPECIFICATIONS
Type | SM | MM |
Polishing | APC | PC |
Insertion Loss | ≤0.35 dB | ≤0.35 dB |
Return Loss | ≥55 dB | - |
Durability(500 mattings) | ≤0.2 dB increase(Max) | |
Operating Temperature | -20°C to +75°C | |
Storage Temperature | -40°C to +75°C |