Wall Mount Fiber Optic Patch Panels are designed for direct termination of fiber optic cables and can be mounted virtually anywhere. Wall-mount available unloaded, as well as having the capability to become a full-splice enclosure with mechanical terminations. A large variety of connector adapters are offered to meet your specific requirements.

DNC 2F Terminal box is a rugged, low cost, low profile interconnection between central office and multi-dwelling units of FTTx application. Its multilayer design allows installers to access only the components necessary for initial installation or subscriber turn-up. It can house the splitter and allows for pigtail splicing of distribution/drop cables as needed. Applications: FTTH, FTTB, FTTC, Telecommunication Network, CATV, Local Area Network.

Product Features

• The structure of this 2 port wall mountable patch panel is innovative and designed in a up-down bisection. It is easy to install simply by untighneting the fixing nut. This allows fiber optic cables and fiber pigtails to pass in and out in a single slide.
• The housing is made of high strenght polycarbonate plastic which provides mechanical strength and insures long-lasting reliability.
• The Tray makes use of a Slide-In-Lock and has an opening angle of 90. Making it easy to install and maintain.
• Elastic material is used to secure fiber pigtails. When the end of the fiber pigtail cannot be determined it is possible to rout the fiber into the splice tray. If needed the active connector can be installed outside of the housing and there for it can connect termination equipment without requiring connecting adapter

DNC Wall Mount Fiber Optic Termination Units are designed for direct termination of fiber optic cables and can be mounted virtually anywhere. Wall-mount available unloaded, as well as having the capability to become a full-splice enclosure with mechanical terminations. A large variety of connector adapters are offered to meet your specific requirements.

DNC 2 Port Terminal box is a rugged, low cost, low profile interconnection between central office and multi-dwelling units of FTTx application. Its multilayer design allows installers to access only the components necessary for initial installation or subscriber turn-up. It can house the splitter and allows for pigtail splicing of distribution/drop cables as needed. Applications: FTTH, FTTB, FTTC, Telecommunication Network, CATV, Local Area Network.

Product Features

• The structure of this 2 port Wall mountable Termination unit is innovative and designed in a up-down bisection. It is easy to install simply by untighneting the fixing nut. This allows fiber optic cables and fiber pigtails to pass in and out in a single slide.
• The housing is made of high strenght polycarbonate plastic which provides mechanical strength and insures long-lasting reliability.
• The Tray makes use of a Slide-In-Lock and has an opening angle of 90. Making it easy to install and maintain.
• Elastic material is used to secure fiber pigtails. When the end of the fiber pigtail cannot be determined it is possible to rout the fiber into the splice tray. If needed the active connector can be installed outside of the housing and there for it can connect termination equipment without requiring connecting adapte

DNC Wall Mount Fiber Optic Termination Units are designed for direct termination of fiber optic cables and can be mounted virtually anywhere. Wall-mount available unloaded, as well as having the capability to become a full-splice enclosure with mechanical terminations. A large variety of connector adapters are offered to meet your specific requirements.

DNC 4 Port Terminal box is a rugged, low cost, low profile interconnection between central office and multi-dwelling units of FTTx application. Its multilayer design allows installers to access only the components necessary for initial installation or subscriber turn-up. It can house the splitter and allows for pigtail splicing of distribution/drop cables as needed. Applications: FTTH, FTTB, FTTC, Telecommunication Network, CATV, Local Area Network.

Product Features

• The structure of this 4 port Wall mountable Termination unit is innovative and designed in a up-down bisection. It is easy to install simply by untighneting the fixing nut. This allows fiber optic cables and fiber pigtails to pass in and out in a single slide.
• The housing is made of high strenght polycarbonate plastic which provides mechanical strength and insures long-lasting reliability.
• The Tray makes use of a Slide-In-Lock and has an opening angle of 90. Making it easy to install and maintain.
• Elastic material is used to secure fiber pigtails. When the end of the fiber pigtail cannot be determined it is possible to rout the fiber into the splice tray. If needed the active connector can be installed outside of the housing and there for it can connect termination equipment without requiring connecting adapter

DNC Wall Mount Fiber Optic Termination Units are designed for direct termination of fiber optic cables and can be mounted virtually anywhere. Wall-mount available unloaded, as well as having the capability to become a full-splice enclosure with mechanical terminations. A large variety of connector adapters are offered to meet your specific requirements.

DNC 8 Port Terminal box is a rugged, low cost, low profile interconnection between central office and multi-dwelling units of FTTx application. Its multilayer design allows installers to access only the components necessary for initial installation or subscriber turn-up. It can house the splitter and allows for pigtail splicing of distribution/drop cables as needed. Applications: FTTH, FTTB, FTTC, Telecommunication Network, CATV, Local Area Network.

Product Features

• The structure of this 8 port Wall mountable Termination unit is innovative and designed in a up-down bisection. It is easy to install simply by untighneting the fixing nut. This allows fiber optic cables and fiber pigtails to pass in and out in a single slide.
• The housing is made of high strenght polycarbonate plastic which provides mechanical strength and insures long-lasting reliability.
• The Tray makes use of a Slide-In-Lock and has an opening angle of 90. Making it easy to install and maintain.
• Elastic material is used to secure fiber pigtails. When the end of the fiber pigtail cannot be determined it is possible to rout the fiber into the splice tray. If needed the active connector can be installed outside of the housing and there for it can connect termination equipment without requiring connecting adapter.

DNC Wall Mount Fiber Optic Termination Units are designed for direct termination of fiber optic cables and can be mounted virtually anywhere. Wall-mount available unloaded, as well as having the capability to become a full-splice enclosure with mechanical terminations. A large variety of connector adapters are offered to meet your specific requirements.

DNC 12 Port Terminal box is a rugged, low cost, low profile interconnection between central office and multi-dwelling units of FTTx application. Its multilayer design allows installers to access only the components necessary for initial installation or subscriber turn-up. It can house the splitter and allows for pigtail splicing of distribution/drop cables as needed. Applications: FTTH, FTTB, FTTC, Telecommunication Network, CATV, Local Area Network.

Product Features

• The structure of this 12 port Wall mountable Termination unit is innovative and designed in a up-down bisection. It is easy to install simply by untighneting the fixing nut. This allows fiber optic cables and fiber pigtails to pass in and out in a single slide.
• The housing is made of high strenght polycarbonate plastic which provides mechanical strength and insures long-lasting reliability.
• The Tray makes use of a Slide-In-Lock and has an opening angle of 90. Making it easy to install and maintain.
• Elastic material is used to secure fiber pigtails. When the end of the fiber pigtail cannot be determined it is possible to rout the fiber into the splice tray. If needed the active connector can be installed outside of the housing and there for it can connect termination equipment without requiring connecting adapter.

Wall Mount Fiber Optic Patch Panels are designed for direct termination of fiber optic cables and can be mounted virtually anywhere. Wall-mount available unloaded, as well as having the capability to become a full-splice enclosure with mechanical terminations. A large variety of connector adapters are offered to meet your specific requirements.

DNC 2F Terminal box is a rugged, low cost, low profile interconnection between central office and multi-dwelling units of FTTx application. Its multilayer design allows installers to access only the components necessary for initial installation or subscriber turn-up. It can house the splitter and allows for pigtail splicing of distribution/drop cables as needed. Applications: FTTH, FTTB, FTTC, Telecommunication Network, CATV, Local Area Network.

Product Features

• The structure of this 2 port wall mountable patch panel is innovative and designed in a up-down bisection. It is easy to install simply by untighneting the fixing nut. This allows fiber optic cables and fiber pigtails to pass in and out in a single slide.
• The housing is made of high strenght polycarbonate plastic which provides mechanical strength and insures long-lasting reliability.
• The Tray makes use of a Slide-In-Lock and has an opening angle of 90. Making it easy to install and maintain.
• Elastic material is used to secure fiber pigtails. When the end of the fiber pigtail cannot be determined it is possible to rout the fiber into the splice tray. If needed the active connector can be installed outside of the housing and there for it can connect termination equipment without requiring connecting adapter

DNC Wall Mount Fiber Optic Termination Units are designed for direct termination of fiber optic cables and can be mounted virtually anywhere. Wall-mount available unloaded, as well as having the capability to become a full-splice enclosure with mechanical terminations. A large variety of connector adapters are offered to meet your specific requirements.

DNC 2 Port Terminal box is a rugged, low cost, low profile interconnection between central office and multi-dwelling units of FTTx application. Its multilayer design allows installers to access only the components necessary for initial installation or subscriber turn-up. It can house the splitter and allows for pigtail splicing of distribution/drop cables as needed. Applications: FTTH, FTTB, FTTC, Telecommunication Network, CATV, Local Area Network.

Product Features

• The structure of this 2 port Wall mountable Termination unit is innovative and designed in a up-down bisection. It is easy to install simply by untighneting the fixing nut. This allows fiber optic cables and fiber pigtails to pass in and out in a single slide.
• The housing is made of high strenght polycarbonate plastic which provides mechanical strength and insures long-lasting reliability.
• The Tray makes use of a Slide-In-Lock and has an opening angle of 90. Making it easy to install and maintain.
• Elastic material is used to secure fiber pigtails. When the end of the fiber pigtail cannot be determined it is possible to rout the fiber into the splice tray. If needed the active connector can be installed outside of the housing and there for it can connect termination equipment without requiring connecting adapte

DNC Wall Mount Fiber Optic Termination Units are designed for direct termination of fiber optic cables and can be mounted virtually anywhere. Wall-mount available unloaded, as well as having the capability to become a full-splice enclosure with mechanical terminations. A large variety of connector adapters are offered to meet your specific requirements.

DNC 4 Port Terminal box is a rugged, low cost, low profile interconnection between central office and multi-dwelling units of FTTx application. Its multilayer design allows installers to access only the components necessary for initial installation or subscriber turn-up. It can house the splitter and allows for pigtail splicing of distribution/drop cables as needed. Applications: FTTH, FTTB, FTTC, Telecommunication Network, CATV, Local Area Network.

Product Features

• The structure of this 4 port Wall mountable Termination unit is innovative and designed in a up-down bisection. It is easy to install simply by untighneting the fixing nut. This allows fiber optic cables and fiber pigtails to pass in and out in a single slide.
• The housing is made of high strenght polycarbonate plastic which provides mechanical strength and insures long-lasting reliability.
• The Tray makes use of a Slide-In-Lock and has an opening angle of 90. Making it easy to install and maintain.
• Elastic material is used to secure fiber pigtails. When the end of the fiber pigtail cannot be determined it is possible to rout the fiber into the splice tray. If needed the active connector can be installed outside of the housing and there for it can connect termination equipment without requiring connecting adapter

DNC Wall Mount Fiber Optic Termination Units are designed for direct termination of fiber optic cables and can be mounted virtually anywhere. Wall-mount available unloaded, as well as having the capability to become a full-splice enclosure with mechanical terminations. A large variety of connector adapters are offered to meet your specific requirements.

DNC 8 Port Terminal box is a rugged, low cost, low profile interconnection between central office and multi-dwelling units of FTTx application. Its multilayer design allows installers to access only the components necessary for initial installation or subscriber turn-up. It can house the splitter and allows for pigtail splicing of distribution/drop cables as needed. Applications: FTTH, FTTB, FTTC, Telecommunication Network, CATV, Local Area Network.

Product Features

• The structure of this 8 port Wall mountable Termination unit is innovative and designed in a up-down bisection. It is easy to install simply by untighneting the fixing nut. This allows fiber optic cables and fiber pigtails to pass in and out in a single slide.
• The housing is made of high strenght polycarbonate plastic which provides mechanical strength and insures long-lasting reliability.
• The Tray makes use of a Slide-In-Lock and has an opening angle of 90. Making it easy to install and maintain.
• Elastic material is used to secure fiber pigtails. When the end of the fiber pigtail cannot be determined it is possible to rout the fiber into the splice tray. If needed the active connector can be installed outside of the housing and there for it can connect termination equipment without requiring connecting adapter.

DNC Wall Mount Fiber Optic Termination Units are designed for direct termination of fiber optic cables and can be mounted virtually anywhere. Wall-mount available unloaded, as well as having the capability to become a full-splice enclosure with mechanical terminations. A large variety of connector adapters are offered to meet your specific requirements.

DNC 12 Port Terminal box is a rugged, low cost, low profile interconnection between central office and multi-dwelling units of FTTx application. Its multilayer design allows installers to access only the components necessary for initial installation or subscriber turn-up. It can house the splitter and allows for pigtail splicing of distribution/drop cables as needed. Applications: FTTH, FTTB, FTTC, Telecommunication Network, CATV, Local Area Network.

Product Features

• The structure of this 12 port Wall mountable Termination unit is innovative and designed in a up-down bisection. It is easy to install simply by untighneting the fixing nut. This allows fiber optic cables and fiber pigtails to pass in and out in a single slide.
• The housing is made of high strenght polycarbonate plastic which provides mechanical strength and insures long-lasting reliability.
• The Tray makes use of a Slide-In-Lock and has an opening angle of 90. Making it easy to install and maintain.
• Elastic material is used to secure fiber pigtails. When the end of the fiber pigtail cannot be determined it is possible to rout the fiber into the splice tray. If needed the active connector can be installed outside of the housing and there for it can connect termination equipment without requiring connecting adapter.