Company Information
Member Since 8 Years
Nature of Business Retailer
GST No. 27AKZPC0735H1ZZAsk for more detail from the seller
Contact Supplier
| Primary Flow Tube | |
|---|---|
| Media Pressure | 20kg/cm2, 25 kg/cm |
| Media Temperature | PTFE LINER (0 – 90 oC max) Hard Rubber LINER( 0 – 90oC max) |
| Ambient Temp | 0oC to 60 oC |
| Materials | Pipe SS 304 [non magnetic & without paint] |
| Electrodes | SS 316/SS 316L/ hastelloy C |
| Inner lining | PTFE / Hard rubber |
| Coil Housing | CS (Polyurethane Painted) |
| Amplifier / Transmitter | |
| Type | Integral / Remote Mounting / blind 4-20mA Transmitter |
| Enclosure | Aluminum Die-cast - for Amplifier / Transmitter |
| Dimensions | 160 mm (L) x 100 mm (W) x 80 mm (D) (Head mount mounting) 64 mm (L) x 44 mm (W) x 35 mm (D) (remote mounting) |
| Cable Entries | 3 nos. for remote / integral Transmitter |
| Cable Glands | PG-7 [Standard] |
| Power Supply | 110 V / 220 V AC 50 Hz S.P. ± 10 % |
| Temperature | 0 – 50 oC (Operating Ambient) |
| Temp. Drift | 0.010 % / oC |
| Humidity | 90 % R.H. max. Non-condensing |
| Input | Micro-volt signal proportional to flow rate from Flow Tube |
| Outputs | 4 – 20 mA dc in max. 110 Ohms – Proportional (0 – 100 % flow rate) |
| Flow rate | m³/hr, Lit/hr, Lit/min & Lit/sec |
| Min. Media | 5 µSiemens / cm (Conductivity) |
| Coil Excitation | Pulsed DC |
| Flow Velocity | a) 1.25m/s, b) 2.5m/s, c) 5.0m/s, d) 10.0m/s b) V=0.3m/s, b) V=1m/s, c) V=12m/s |
| Accuracy | ± 1% (10 % to 90 % of calibrated range in ref. conditions) |
| Ref. Conditions | Power supply nominal ± 10% Temperature 27oC ± 2oC |
| Repeatability | ± 0.2 % of reading |
| Ingress Protection | IP – 65 Equivalent |
Please Wait...Please Wait...Please Wait...
Connect with us
For Buyer 
For Seller 
Help 
Koregaon, Pune, Maharashtra 
Send Enquiry