Verified
Write a Review
Our Products
Leading Manufacturer, Supplier & Retailer of Industrial Ro Plant, RO Antiscalant Chemical, RO Membrane Cleaning Chemicals, Domestic RO System and Cartridge Filter.
Additional Information:
Payment Terms :
Additional Information:
Payment Terms :
Packaging Details : Quantity of packing available as per customer requirements
Delivery Time : Time depends on location
The process of cleaning a reverse osmosis (RO) plant involves several steps, including:
Chemical cleaning: Use high and low pH cleaning chemicals to remove organic and biological impurities. High pH cleaning agents remove calcium that binds foulants and biofilms to the membrane surface. Low pH cleaning may be used before high pH cleaning, but organic contaminants can lose their ionic charge and be pressed into the membrane.
Flushing: Use the backwash flushing method to clear blockages and restore function. Flush from the back (porous support layer) to the front (dense layer) of the membrane.
Visual inspection: Remove the membranes to inspect the housings and membranes for any problems.
Rinsing: Use permeate or good-quality water for rinsing.
Additional Information:
Payment Terms :
Drinking water RO plant for home perpose
Additional Information:
Payment Terms :
Packaging Details : Transportation box
Delivery Time : Depends on location
Our PP Melt Blown Filter Cartridge is made to remove sand, dirt, rust and suspended particles, while maintaining high filtration ratings and an exceptional pollutant holding capacity. It's working life depends on feed water quality
Additional Information:
Payment Terms :
Packaging Details : Box type
Delivery Time : 0 to 7 days
Reverse osmosis (RO) is a water purification process that uses a semi permeable membrane to separate ions, unwanted molecules and larger particles from drinking water. Water is forced through these membranes with the use of pressure and force (typically from a pumping system), the usual process of osmosis is reversed via feed water being pushed through the semi-permeable membranes.
Technical Specifications of DOW RO Membrane BW30-365 8040:-
FOR BW30-365
FilmTec Product: BW30-365
Size (Approximate): 8" Dia. x 40"L
Flow Rate: 9, 500 gpd (36 m/d)
Applied Pressure: 225 psig (15.3 bar)
Stabilized Salt Rejection: 99.5%
Minimum Salt Rejection: 99.0%
Active Surface Area: 365 Sq. Ft.
Single Element Recovery: 15%
End Style: Standard Flush Cut
Exterior: Hard Shell Fiberglass
Feed Spacer: 34 mil
Membrane Type: Polyamide Thin-Film Composite
Permeate flow and salt rejection based: 2, 000 ppm NaCl feed stream, 77F, 15% recovery, 225 psig.
OPERATING LIMITS FOR BW30-365
Maximum Operating Temperature: 113F (45C)
Maximum Operating Pressure: 600 psig (41 bar)
Maximum Pressure Drop: 15 psig (1 bar)
Maximum Feed Flow Rate: 85 gpm (19m/h)
pH Range, Continuous Operation*: 2-11
pH Range, Short-Term Cleaning**: 1-13
Maximum Feed Silt Density Index: SDI 5
Free Clorine Tolerance***:
Additional Information:
Payment Terms :
Packaging Details : Box type
Delivery Time : 0 to 7 days
Nirmal Soni (Divya watertech)
695, Affordable colony. Prem nagar 3. Kota, Anantpura, Rajasthan - 326512, India
Share us via
View Contact Number 
