Divya Control Elements Private Limited

Makarpura Industrial Estate GIDC, Vadodara, Gujarat

Moisture Separator

(with Auto / Manual Drain)

Features:

• Extruded Body & Bowl to avoid porosity & ensuring Rugged design.
• Filter is Borosilicate Micro Glass. It is provided with 2Layers for additional Protection.
• Borosilicate Element has a Unique characteristic of Removing Moisture, Oil &
• Dust particulate from Inst. / Compressed Air.
• This Element has a high Void Space, thereby ensuring Delivery of higher Flow across the element surface with Negligible Pressure drop.
• Auto Drain is Floattype, as the Level comes, the Float rises for the Water to drain away.
• Another feature of the AutoDrain is that if the Auto system fails while functioning, the same Drain gets converted in a Manual Drain System till it is replaced/rectified.
• Facility of Sight Glass is also available.
• Overall, this Product is designed with Inbuilt properties to deliver Clean air for downstream use.
• Sight Glass, if required is also displayed clearly

FRL Units are provided to reduce friction & prevent corrosion of the moving parts of an air-actuated mechanism powered by compressed air.
After filtration, the regulated air enters the lubricator where due to pressure drop at the oil metering orifice, the oil is projected upwards & the oil rate is adjusted by the venturi valve to get the correct oil-to-air density ratio.

FRL Units are available as under

• Filter Regulator combined with Lubricator i.e. FR+L
• Filter + Regulator + Lubricator i.e. F+R+L
• Accessories include Mounting Bracket with Nuts, Bolts & Pressure Gauge.
• Standard Drain provision is Manual type, Auto-Drain also available for Filter / Filter Regulator ssembly.
• Provision of Integral Relief Valve to relieve excess pressure in case of over-pressure onditions. No need for any external relief valve / blow off valve.
• The FRL Units are self-actuating with intermittent bleed.
• Available up to 2” size with Screwed Connections.

FRL Units are provided to reduce friction & prevent corrosion of the moving parts of an air-actuated mechanism powered by compressed air.
After filtration, the regulated air enters the lubricator where due to pressure drop at the oil metering orifice, the oil is projected upwards & the oil rate is adjusted by the venturi valve to get the correct oil-to-air density ratio.

FRL Units are available as under

• Filter Regulator combined with Lubricator i.e. FR+L
• Filter + Regulator + Lubricator i.e. F+R+L
• Accessories include Mounting Bracket with Nuts, Bolts & Pressure Gauge.
• Standard Drain provision is Manual type, Auto-Drain also available for Filter / Filter Regulator ssembly.
• Provision of Integral Relief Valve to relieve excess pressure in case of over-pressure onditions. No need for any external relief valve / blow off valve.
• The FRL Units are self-actuating with intermittent bleed.
• Available up to 2” size with Screwed Connections.

FRL Units are provided to reduce friction & prevent corrosion of the moving parts of an air-actuated mechanism powered by compressed air.
After filtration, the regulated air enters the lubricator where due to pressure drop at the oil metering orifice, the oil is projected upwards & the oil rate is adjusted by the venturi valve to get the correct oil-to-air density ratio.

FRL Units are available as under

• Filter Regulator combined with Lubricator i.e. FR+L
• Filter + Regulator + Lubricator i.e. F+R+L
• Accessories include Mounting Bracket with Nuts, Bolts & Pressure Gauge.
• Standard Drain provision is Manual type, Auto-Drain also available for Filter / Filter Regulator ssembly.
• Provision of Integral Relief Valve to relieve excess pressure in case of over-pressure onditions. No need for any external relief valve / blow off valve.
• The FRL Units are self-actuating with intermittent bleed.
• Available up to 2” size with Screwed Connections.

Features

• Used at the downstream of a pressure regulator to protect the system from over-pressure.
• Wide array of springs to meet majority of application requirements.
• Provision to match blow down ring & disc in case, the relief pressure is to be re-set for proper popping.
• Simple design ensuring long life & functional reliability.

Features

• Effective during supply failure
• Maintains correct actuator position
• Cut-off pressure adjustable as desire
• Soft seat design ensuring low air consumption
• Simple & reduces maintenance
• Cost competitive

Air Set is a combined filter cum regulator unit with an appreciable capacity & low pressure droop. (Typical case: at 100 psig ip and 20 psig op, capacity is 4.0 scfm with a 1.5 psig droop). One piece pressure reducing & relief valve. Tight sealing soft seat. Simplified design and reduced number of moving parts. Simple & reduced maintenance. Wrench adjustable, available in various ranges. Fast & sensitive response. High Filtration efficiency. Filter readily accessible.

OperationThe primary air enters the inlet port and passes through the Filter element where solid particles are trapped. Water and oil particles are thrown against inside wall of the bowl by centrifugal force The liquid particles run down and collect into the bottom of the bowl. Clean air, then flows the upward
into the regulator section. Here, the flow is restricted to establish the desire pressure at the outlet. The regulated air, pressure acting under neath the diaphragm is balanced by the force of the adjustment spring. When the pressure rises above the set point, it pushes the diaphragm away from the relief hole and the excess air finds its way to the atmosphere through the bleed hole, till it again reaches the set point pressure.

Ensures Optimum Performance & ReliabilityThe VISHAL Air Set is a combined filter cum regulator unit with an appreciable capacity & low pressure droop. (Typical case: at 100 psig i/p and 20 psig o/p, capacity is 4.0 scfm with a 1.5 psig droop)

Features

• One piece pressure reducing & relief valve.
• Tight sealing soft seat.
• Simplified design and reduced number of moving parts.
• Simple & reduced maintenance.
• No lubrication required.
• Wrench adjustable, available in various ranges.
• Fast & sensitive response.
• High Filtration efficiency.
• Filter readily accessible.

Regulation CharacteristicsKeeping the Air Flow constant, the variation in the set Output Pressure (o/p), with reference to the changes in the Input Pressure (i/p) defines the Pressure Regulation Characteristics of a Filter Pressure Regulator.
Vishal Air Set successfully maintains the variations, in the Output Pressure within Tolerable Limits of max. 5% (In case of Low Range) & 10% (In case of High Range), even if the change in the Input Pressure is ± 50% taking care, the same is kept higher by min. 6% of the set output pressure 
Flow CharacteristicsKeeping the Inlet Pressure constant, the Output Pressure is set & as the flow increases, the droop which occurs across the valve with regards to flow in the characteristics of flow for a Filter Pressure Regulator. Pressure Droop dampens the performance of an Air Set.
Vishal Air Set successfully reduces the Pressure Droop by a Sensing Hole, which connects the chamber beneath the diaphragm to the port, wherein the valve is seated. As the flow increases, the droop occurs which in turn forces the diaphragm (due to spring load) to push open the valve, thereby compensating for the Pressure Droop.
A large port is responsible for higher discharge of air through the valve for quick recovery of the droop.