Write a Review
Our Products
Yarn
2 Products availableNuts Bolts And Fasteners
2 Products availableEarthing Equipment
2 Products availableEarthing Electrodes
1 Products availableIndustrial Seals
1 Products availableBrackets
1 Products availableCoupling
1 Products availableOur offered Product range includes U Bolt Rod to Cable Clamp GUV, Back Plate Hold Fast Stem, Air Rod Base and Earth Point.
Water main Bond is used for bonding tape to large diameter pipes
| Code | Product Name | Trade Size | Conductor Size | Bolt Size |
| 1800026 | Water Main Bond | 26 mm max. |
| Starting from the base this is the Grounding and Bonding Section of the entire Earthing and Protection Project. | ||
| This Quality Earth Rods are basically made from either solid copper, stainless steel or copper bonded steel. Divine Impex is the manufacturer and supplier of solid copper and stainless steel Earth Rods. | ||
| This Copper Rods again can be unthreaded, single side threaded or both side threaded as per the requirement and client can get this all Divine Impex at best deal rates. |
| Product Code | Rod Diameter | Length | Thread Diameter |
| 111212 | 12.7 mm | 1200 mm | 9/16 " |
| 111215 | 12.7 mm | 1500 mm | 9/16 " |
| 111218 | 12.7 mm | 1800 mm | 9/16 " |
| 111224 | 12.7 mm | 2400 mm | 9/16 " |
| 111230 | 12.7 mm | 3000 mm | 9/16 " |
| 111412 | 14.2 mm | 1200 mm | 5/8 " |
| 111415 | 14.2 mm | 1500 mm | 5/8 " |
| 111418 | 14.2 mm | 1800 mm | 5/8 " |
| 111424 | 14.2 mm | 2400 mm | 5/8 " |
| 111430 | 14.2 mm | 3000 mm | 5/8 " |
| 111712 | 17.2 mm | 1200 mm | 3/4 " |
| 111715 | 17.2 mm | 1500 mm | 3/4 " |
| 111718 | 17.2 mm | 1800 mm | 3/4 " |
| 111724 | 17.2 mm | 2400 mm | 3/4 " |
| 111730 | 17.2 mm | 3000 mm | 3/4 " |
| U bolt Rod to Cable Clamp GUVare made from high copper content alloy for the connection of the earthing rod to cable. Corrosion resistance, conductivity and mechanical strength in clamp design is used to ensure the earthing system remains operative for many years. | ||
| Code | Product Name | Trade Size | Conductor Size | Rod Diameter |
| 700016 | U bolt Rod to Cable Clamp GUV | 16 mm | 16 - 95 mm² | 5/8 " |
| 700020 | U bolt Rod to Cable Clamp GUV | 20 mm | 16 - 70 mm² | 3/4 |
| DC Tape Clipare available for a wide range of construction material. DC Tape Clip is used for Bare Copper Tape, Bare Aluminum Tape, PVC Insulated Copper Tape or Lead Covered Copper Tape. | ||
| Fix Using Counter Sunk Wood Screw 1.5" X No. 10. | ||
| Code | Product Name | Conductor Size | ||
| 200203 | DC Tape Clip | 20 X 3 mm | ||
| 200253 | DC Tape Clip | 25 X 3 mm | ||
| 200254 | DC Tape Clip | 25 X 4 mm | ||
| 200256 | DC Tape Clip | 25 X 6 mm | ||
| 200295 | DC Tape Clip | 29 X 5 mm | ||
| 200305 | DC Tape Clip | 30 X 5 mm | ||
| 200313 | DC Tape Clip | 31 X 3 mm | ||
| 200316 | DC Tape Clip | 31 X 6 mm | ||
| 200317 | DC Tape Clip | 31 X 7 mm | ||
| 200383 | DC Tape Clip | 38 X 3 mm | ||
| 200385 | DC Tape Clip | 38 X 5 mm | ||
| 200386 | DC Tape Clip | 38 X 6 mm | ||
| 200404 | DC Tape Clip | 40 X 4 mm | ||
| 200405 | DC Tape Clip | 40 X 5 mm | ||
| 200406 | DC Tape Clip | 40 X 6 mm | ||
| 200503 | DC Tape Clip | 50 X 3 mm | ||
| 200504 | DC Tape Clip | 50 X 4 mm | ||
| 200506 | DC Tape Clip | 50 X 6 mm | ||
| 200508 | DC Tape Clip | 50 X 8 mm |
Back Plate Hold fast Stem to be used where it is necessary to hold the conductor away from the building surface. The hold fast is assembled with a fixing screw for use with a metallic DC Clip.
Air Rod Base are used to support air rods on flat roof surfaces.
| Code | Product Name | Trade Size | Conductor Size | Rod Diameter |
| 1911525 | Air Rod Base | 16 mm | 25 mm | |
| 1912025 | Air Rod Base | 20 mm | 25 mm | |
| 1921525 | Air Rod Base | 16 mm | 25 mm | |
| 1922025 | Air Rod Base | 20 mm | 25 mm |
| Glazing Bar Hold Fast are designed to be used on glazing units but can be installed wherever the conductor has to be fixed onto a narrow flange. The hold fast is assembled with a fixing screw for use with a metallic or non-metallic DC clip. | ||
| Code | Product Name | Material | Conductor Size | Rod Diameter |
| 2200101 | Glazing Bar Hold Fast | Copper | ||
| 2200202 | Glazing Bar Hold Fast | Aluminum |
Flat Saddle are used to support the copper taper pointed air rods on flat roof surfaces.
|
|||||||||||||||||||||||||||
| Metalwork Bond are used for connecting to all types of metal structures up to the thickness of 13 mm. | ||
| Code | Product Name | Material | Conductor Size | Rod Diameter |
| 2400108 | Metalwork Bond | Copper | 8 mm | |
| 2400208 | Metalwork Bond | Aluminum | 8 mm |
Rod Brackets provide a 75mm projection from the building face and are used where it is not possible to fit a saddle onto the building roof. The brackets are used in conjunction with the rod to tape coupling used to secure the flat tape to the air rod.
| Code | Product Name | Material | Conductor Size | Rod Diameter |
| 2800116 | Rod Brackets | Copper | Flat Type | 16 mm |
| 2800120 | Rod Brackets | Copper | Flat Type | 20 mm |
| 2800216 | Rod Brackets | Copper | Long Neck | 16 mm |
| 2800220 | Rod Brackets | Copper | Long Neck | 20 mm |
| 2800316 | Rod Brackets | Aluminum | Flat Type | 16 mm |
| 2800320 | Rod Brackets | Aluminum | Flat Type | 20 mm |
| 2800416 | Rod Brackets | Aluminum | Long Neck | 16 mm |
| 2800420 | Rod Brackets | Aluminum | Long Neck | 20 mm |
Ridge Saddles are used to support air rods on roof ridges.
|
|||||||||||||||||||||||||||
Rod To Tape Coupling enables the flat tape to be connected to the air rod. Used in conjunction with the side mounting air rod brackets.
| Code | Product Name | Material | Conductor Size | Rod Diameter |
| 2900016 | Rod To Tape Coupling | Copper | 25 x 3 mm | 15 mm |
| 2900168 | Rod To Tape Coupling | Copper | 50 - 70 mm² | 15 mm |
| 2900208 | Rod To Tape Coupling | Copper | 95 mm² | 15 mm |
| 2900316 | Rod To Tape Coupling | Aluminum | 25 x 3 mm | 15 mm |
Fix using countersunk wood screws 1.5" X No. 10 and wall plugs.
| Code | Product Name | Trade Size | Conductor Size | |
| 900004 | Heavy Duty Cable Saddle | 4 mm | 6 mm² | |
| 900008 | Heavy Duty Cable Saddle | 8 mm | 35 mm² | |
| 900095 | Heavy Duty Cable Saddle | 9.5 mm | 50 mm² | |
| 900010 | Heavy Duty Cable Saddle | 10 mm | 50 mm² | |
| 900011 | Heavy Duty Cable Saddle | 11 mm | 70 mm² | |
| 900012 | Heavy Duty Cable Saddle | 12 mm | 95 mm² | |
| 900013 | Heavy Duty Cable Saddle | 13 mm | 120 mm² | |
| 900015 | Heavy Duty Cable Saddle | 15 mm | 150 mm² | |
| 900019 | Heavy Duty Cable Saddle | 19 mm | 185 mm² | |
| 900022 | Heavy Duty Cable Saddle | 22 mm | 240 mm² |
Straight Cable Lugis used for bonding copper and aluminum conductors to steel work
| Code | Product Name | Trade Size | Conductor Size | |
| 1000008 | Straight Cable Lug | 8 mm | 8 mm | |
| 1000010 | Straight Cable Lug | 10 mm | 10 mm |
Eye Bolt can be used to screw direct onto a copper bonded earth rod, offering an earthing point for various moving vehicles.
| Code | Product Name | Trade Size | Conductor Size | Rod Diameter |
| 1700058 | Eye Bolt | 5/8 " | ||
| 1700034 | Eye Bolt | 3/4 " |
Divine Impex (Divine Impex)
Plot No. 4, G.I.D.C. Phase II, Dared, Jamnagar, Gujarat - 361004, India
Share us via
View Contact Number 
