Our Products
Industrial & Engineering Products
2 Products availablePaper
2 Products availableInsulators And Insulation Materials
2 Products availableHardware Fittings And Accessories
1 Products availableYarns And Threads
1 Products availableBlankets
1 Products availableWhiteboards
1 Products availableWe offer a complete product range of veneering modules
WeDINESH METAL INDIAare one of the leading Stokist & Supplier ofStainless Steel Barsof India. And we believe that our productStainless Steel Barswill always satisfy our customers.
are supplied in straight lengths and is either hot or cold finished. We procure these SS Bars from the renowned manufacturers in the industry and make sure that they are in compliance with the prevailing quality standards. Our clients can avail from us these bars in various shapes, sizes, and surface finishes.
Salient Features:
High tensile strength
Corrosion resistance
Durability
|
||||||
|
|
Grades |
AISI-304, 304L, 316, 316L, 317L, 321, 316 Ti, 309, 310, 904L, 410, 420, 430, 431, 202 (ASTM)- A-479 Etc. |
||||
|
Finishing |
Bright, Polish & Black |
|||||
|
In Form |
ARound, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Block, Ingot, Forging Etc. |
|||||
|
Length |
Standard & Cut length |
|||||
|
Specialize |
S.S. ROPE WIRE |
|||||
| CUMI supplies ceramic Grinding Media and Ball Mill Liners to the Ceramic Tile industry. Grinding media is used for particle size reduction which takes place when the material being ground is sandwiched between the media. Ball Mill Liners are supplied to protect the ball mill from wear and provide longer usable life. | ||||||||||||||||||||||||
| Over the years CUMI has developed the expertise in grinding operation and can provide guidance on media selection both sizes and proportion. In addition to experienced installation crew of CUMI can provide on-site assistance in terms of lining the ball mill.
| ||||||||||||||||||||||||
|
"Specifications of CUMITUFF AD90" |
||
|
Properties |
Unit |
Typical Value* |
|
Alumina Content |
% |
90% |
|
Density |
g/cc |
3.55 |
|
Water Absorption |
% |
NIL |
|
Hardness |
R45N |
75 on R45N scale |
|
Pot Mill Wear Test |
% Wear loss |
0.30% to 1.3% |
We are engaged in supplying of a wide range of Ceramic Fiber Boards which is procured from renowned vendors of the market. Our quality controllers test these on well defined parameters to offer our clients a consistent quality product range. Offering these in standard specifications, these can also be customized as per clients' specific requirements. These are known for features like reliable performance, fire retardant finish and longer service life.
Characteristics:
Applications:
| Physical Properties | E - Board | STD Board | AZS Board | HS- 45 |
| Classification Temperature C | 1100 | 1260 | 1400 | 1260 |
| Chemical Composition (%) |
|
|
|
|
| Al2O3 | > 30 | > 40 | Ø29 | 49 – 53 |
| SiO2 | < 60 | < 60 | < 55 | 33 – 37 |
| ZrO2 | < 19.5 | ------ | >10 | 9 – 12 |
| Loss On ignition % | < 10 | < 10 | < 10 | < 10 |
| Density (Nominal) kg/m3 | 240 | 240 | 240 | 720 |
| Modulus of Rupture Kpa upto 25 mm th | 200 | 500 | 500 | 3000 |
| Modulus of Rupture Kpa >25 mm thk | 125 | 200 | 200 | 2000 |
| Linear Shrinkage % - 24 hrs (Max ) | 3.5 ( 1100 C ) | 4.0 ( 1200 C ) | 4.0 ( 1350 C ) | 1.0 (1200C) |
| Thermal conductivity w / mk ( 600 Deg C) | ------ | 0.11 | 0.13 | 0.15 |
| Grades | (1)1260 (2)"Strong" (3)1400 |
(4)1600 (5)HS- 45 (6)SS 800 |
| Classification Temperature(°C) |
(1)1260 (2)1260 (3)1400 |
(4)1600 (5)1260 (6)1260 |
| Thickness | (1) 5,10, 15, 20, 25, 38 & 50 (2) 5,10, 15, 20, 25, 38 & 50 (3) 5,10, 15, 20, 25, 38 & 50 (4) 15, 25 (5) 5,10, 15, 20, 25, 38 & 50 (6) 5,10, 15, 20, 25, 38 & 50 other Sizes on Request |
|
| Dimensions (mm) | 500 x 1000, 600 x 1000 Other sizes on request | |
| Density (kg/m2) | (1)260 (2)330 (3)230 |
(4)200 (5)720 (6)800 |
| Above Densities are minimum | ||
| Thermal Conductivity (W/mK) (at mean temperature of 600°C depending on density ) | (1) 0.113 (2) 0.125 (3) 0.102 |
(4) 0.079 (5) 0.147 (6) 0.147 |
| Application Areas |
Hot face linings in laboratory type and other small Furnaces & Kilns. Hot face linings of LTM Kiln cars. Combustion chamber linings. |
|
Ceramic Fibre Modulesare made from high quality needled Blanket, Edge Staked (or) Folded with various anchors and other accessories to enable quick, convenient and efficient installation in most furnace linings. These prefabricated modules are designed to meet the thermal insulation requirements of high temperature furnaces. Ceramic Fibre Insulation Modules are made from ceramic fibre, precompressed to a specific density, and held in position with the suitable anchors/accessories. During installation, the modules are further compressed, the resilience of the fibre and recovery ensuring tightly-compressed intermodular joints. Moreover, we are enlisted amidst the forefront Compressed Ceramic Fibre Modules Exporters
| Grades | (1) Cera, Standard (2) Cerachem, Zirconia |
| Classification Temperature(°C) |
(1) 1260 (2) 1425 |
| Thickness | 1) 150,200,250,300 2) 200,250,300 Other thickness on request |
| Dimensions (mm) | (1) & (2) 305 x 305 |
| Density (kg/m2) | (1) & (2) 128, 160, 190 |
| Thermal Conductivity (W/mK) (at mean temperature of 600°C depending on density ) | (1)0.149 (2)0.139 |
| Application Areas |
High Temperature Furnace, Kin, Fired Heater linings where modular construction is preferred. Quick installation and easy maintenance are the advantages of using modules. Used for Lining at Shuttle & all type of kiln. |
Backed by in-depth domain expertise, we are engaged in supplying of a wide range of Cera Blankets. Our products are quality tested on well defined parameters to assure their compliance with defined industry standards. Owing to our client centric approach, we also provide these with customized specifications to meet clients' exact requirements.
Some of the salient features of our products are as follows:
| Physical Properties | CERA | CERA CHEM |
| Classification Temperature C | 1260 | 1425 |
| Al2O3 | 42 – 46 | 33 – 37 |
| SiO2 | 54 – 58 | 48 – 52 |
| ZrO2 | --- | 13 -- 17 |
| Fe2O3 | 0.1 | 0.1 |
| CaO + MgO | 0.08 | 0.08 |
| Na2O + K2O | 0.40 | 0.40 |
| Thermal Conductivity | ||
| Densities Kg / m3 | 64 96 128 | |
| 400 Deg. C | 0.12 0.11 0.10 | |
| 600 Deg .C | 0.20 0.16 0.15 | |
| Grades | (1) Cera (2) Cerachem |
| Classification Temperature(°C) |
(1) 1260 (2) 1425 |
| Thickness | (1) 13,25,38,50 (2) 13,25,38,50 Other thickness on request |
| Dimensions (mm) | (1) & (2) 610 x 7300 Roll size, Other sizes on request |
| Density (kg/m2) | (1) & (2) 96 , 128 Others densities on request |
| Thermal Conductivity (W/mK) (at mean temperature of 600°C depending on density ) | (1)0.150-128 kg/m3 (2)0.150-128 kg/m3 |
| Application Areas |
Furnace, Kin, Fired Heaters, Hydrogen Reformer linings, Also insulation of Steam and Gas Turbines, Investment casting moulds, reusable insulation for field stress relieving, fire protection and acoustic insulation at high temperatures. High Temperature Pipe wrap Application. Used to make Modules for Tunnel & Roller Kiln |
| Grades | (1) Standard (2) Zirconia |
| Classification Temperature(°C) |
(1) 1260 (2) 1425 |
| Thickness | (1) 12 & 25 (2) 12 & 25 Other thickness such as 6,38,50 etc. on request |
| Dimensions (mm) | (1) & (2) 610 x 7300 Roll size, Other sizes on request |
| Density (kg/m2) | (1)64, 96 & 128 (2)96 & 128 160 on request |
| Thermal Conductivity (W/mK) (at mean temperature of 600°C depending on density ) | (1)0.126-128 kg/m3 (2)0.130-128 kg/m3 |
| Application Areas |
Furnace, Kin and Heater, Low Thermal Mass lining for fuel savings, easy installation and maintenance benefits. High temperature pipe-wrap applications. |
With a rich industry experience, we are engaged in trading of Cumituff Ball Mill Liners. These are extensively demanded in market owing to features like optimum hardness and reliable performance. We can also provide installation support for our range of liners. Apart from offering these in standard specifications, we can also get the customized as per the exact requirements of our clients. These can be availed at market leading prices as well.
|
"Specifications of CUMITUFF AD90" |
||
|
Properties |
Unit |
Typical Value* |
|
Alumina Content |
% |
90% |
|
Density |
g/cc |
3.55 |
|
Water Absorption |
% |
NIL |
|
Hardness |
R45N |
75 on R45N scale |
|
Compressive Strength |
Mpa |
1750 |
|
Flexural Strength |
Mpa |
290 |
|
Wear test by Rubber Wheel Abrasion |
gms |
0.1 gms Max |
|
Wear test by Jet erosion |
gms |
0.05 gms Max |
|
Coefficient of Thermal Expansion |
1 X 106/ Degree Celsius |
8.1 |
|
Dimension |
Size |
Dimensional Tolerance* |
|
Length |
<100 mm |
+/-1 mm |
|
Length |
>100 mm |
+/-2 mm |
|
Width |
<100 mm |
+/-1 mm |
|
Width |
>100 mm |
+/-2 mm |
|
Thickness |
<35 mm |
+/-0.5 mm |
|
Thickness |
>35 mm |
+/-1.0 mm |
|
Angle |
|
+/-1 Degree |
|
Pre-Engg tile layout |
+/-1.3 or 2.5% whichever is smaller |
|
Ceramic Fiber textiles is alumina-silicate based refractory fiber, white and odorless. With a reinforcement carrier (usually high temperature fiberglass), the fiber is made into industrial textile products such as Cloth, Tape, Twisted Rope, Square and Round Braid, Yarn, etc.
Ceramic fiber Textiles resists temperature as high as 2300 F. This material is lightweight and has very low thermal conductivity. Ceramic fiber textiles provides excellent insulation at high temperature. Ceramic Fiber Textiles also resists corrosive chemicals, commonly used acid and alkali. The fiber is strong and abrasive. Ceramic Fiber Textiles can be used in extreme environments. Ceramic Fiber Textiles is a good substitute for asbestos products in many insulation and sealing applications.
Applications:
| Physical Properties | CLOTH | TAPE |
| Classification Temperature C | 1260 | 1260 |
| Al2O3 % | 42 – 46 | 33 – 37 |
| SiO2 % | 54 – 58 | 48 – 52 |
| Loss on I gnition % | <25 | <25 |
| weight (kg / m2 ) | 1.0 | 1.0 |
| Grades | (1)Fiber Glass Reinforced (2)S.S wire Reinforced |
| Classification Temperature(°C) |
(1)1260 (2)1260 |
| Thickness | Cloth - 2,3 mm. Rope is available in diameter 6, 12, 19, 25, 38 & 50. Other diameters on request. Tape - 3mm. Available in 25, 50, 75, 100, 125, 150 mm width. Other widths on request. |
| Dimensions (mm) | Cloth - 1 mtr. Wide, 10 mtr. long. Rope & Tape - 25 mtr. Coils |
| Density (kg/m2) | Cloth & Tape 1.1 kg/m2 Rope 330 kg/m2 Depending on diameter |
| Thermal Conductivity (W/mK) (at mean temperature of 600°C depending on density ) | |
| Application Areas |
Available for Temperature 1260°C in FG & SS Reinforced. Cloth is used as thermal curtains, welding curtains, Tape and Rope are used for inspection door seals, gaskets, flange seals, expansion joints, pipe lagging, cable protection, Gas turbine insulation. |
| The Calcium Silicate Blocks & Bricks offered by us are available in various sizes and in powdered form. This product is rigid and is known throughout the industry for high compressive strength and for does not shrink or crack under high temperatures. These blocks can be cut according to exact requirement, and their strength & hardness are a result of the calcium content of this material.
|
| PRODUCT | mm | Thickness mm | BD Kg./m3 | Flexural Strength MPa | Temp. |
| Calcium | 900x600 | 25-100 | 250 | 0.87-0.90 | 800/1000/1100 |
| Silicate Blocks | 600 x150 | 25-100 | 250 | 0.87-0.90 | 800/1000/1100 |
We offer an extensive range of Bulk Fiber, procured from a renowned vendor of the market. These fibers are manufactured in compliance with defined industry standards and also in adherence to prevailing market trends. With features like longer service life and heat resistant finish, these are extensively used in expansion joints, packing & sealing, secondary processing to vacuum formed products and others.
Applications:
| Grades | (1) Cerafiber, Standard (2) Cerachem Fiber, Zirconia |
| Classification Temperature(°C) |
(1) 1260 Deg.C (2) 1425 Deg.C |
| Thickness | N.A |
| Dimensions (mm) | N.A |
| Density (kg/m2) | N.A |
| Thermal Conductivity (W/mK) (at mean temperature of 600°C depending on density ) | N.A |
| Application Areas |
Expansion joints, packing & sealing, filters for other materials, secondary processing to vacuum formed products. Roller Sealing for Roller Hearthkiln. |
We provide an extensive array of Stainless Steel Pipes And Tubes which is widely used for conveyance of fluids intended for critical high temperature and general purposes. These are used in similar service conditions in heat transfer process equipments such as heat exchangers, condensers, boilers, super heaters, general engineering, and process instrumentation. Further, our entire range finds its wide application in various industries like Ship Builders, Paper Industries, Chemicals, Fats, & Fertilizers, Sugar Mills & Distilleries, Cement Industries, Pumps, Petrochemicals, Oil & Natural Gas Organization in terms of the specific materials, Technology, Finance & Personal.
Salient Features:
WeDINESH METAL INDIAare one of the leading Stokist & Supplier ofStainless Steel Wiresof India. And we believe that our productStainless Steel Wireswill always satisfy our customers.
We Are stockist and supplying various types of Stainless steel wires, which are available in different finishes and sizes. They can be customized as per the customer's requirement. The various kinds of stainless steel wires are available in distinguished finishes and sizes as per customer's demand and need.
Salient Features:
High tensile strength
Corrosion resistance
Durability
WeDINESH METAL INDIAare one of the leading Stokist & Supplier ofStainless Steel Sheetsof India. And we believe that our productStainless Steel Sheetswill always satisfy our customers.
| Material :Stainless Steel Sheet Finishing: 2B, 2D, HR, CR, BA, Satin (Met with PVC Coated) Sheet & Plate In Form O f: Coils, foils, shim sheet, perforated sheet, hequered plate, strip, flats, blank (circle), ring (flange), etc. Specialize: Shim sheet, perforated sheet (round, square & oblong hole) & as per your drawing. |
Stainless Steel Sheets
We offer our clients a wide-range of Stainless Steel Sheets that is sourced from reliable vendors of the market. These are designed using advanced technology and are available in different grades of steel. Our range of Stainless Steel Sheets is available in various thicknesses depending on the requirements of the clients and is widely known for its high-end features like corrosion resistance, high tensile strength and longer service life. Stainless Steel Plates Our clients can avail from us a wide range of Stainless Steel Plates that is available in varying thickness, lengths, finishes and tolerances as per the clients needs. These are fabricated by our vendors who make use of premium quality steel and ensure a quality-proven product range. Our range of Stainless Steel Plates is widely demanded amongst our clients and is appreciated for high durability, corrosion resistance and ability to withstand excessive heat
Salient Features:
High tensile strength
Corrosion resistance
Durability
Ceramic fibre ropes & textiles are woven or brained from yarn consisting of refactory ceramic fibre with approximately 20% organic carrier fibre. Insert materials are incorporated into the yarn to increase fibric tensile strength. Alloy wire insert (Grade MR ) are available for obtaining maximum strength at elevated temperature. Glass filament insert (Grade Gr ) are used in applications where electrical resistance is required.
Ceramic fibre textiles may be used upto 1250 Deg. C, however when tensile strength is important the temparature limits of the insert material should be considered.
Application:
Replacement of asbestos rope for heat treat furnace, seals for stove and ovens, expansion joint packing, bulk in tadpole gaskets, gaskets and seals.
Sealing of oven, furnace or boiler doors.
Other Major Application:
Insulation of high-temperature tubes, containers, etc.
The seal of the doors of industrial furnace
The protection of high-temperature
The protection of cable, fuel tubes, etc.
Fireproof twine, wrap, cover, etc.
Compound-materials produce
Availability & Packing: : Standerd Sizes : 4mm to 60mm Dia x 25 Mtrs
| Physical Properties | Twisted Rope | Braided Rope | High Density Rope |
| Classification Temperature C | 1260 C | 1260 C | 1260 C |
| Al2O3 % | 42 – 46 | 42 – 46 | 42 – 46 |
| SiO2 % | 54 – 58 | 54 – 58 | 54 – 58 |
| Loss on I gnition % | <25 | <1.0 | <25 |
| Density(Nominal) kg / m3 | ---- | 200 | 500 |
| Grades | (1)Fiber Glass Reinforced (2)S.S wire Reinforced |
| Classification Temperature(°C) |
(1)1260 (2)1260 |
| Thickness | Cloth - 2,3 mm. Rope is available in diameter 6, 12, 19, 25, 38 & 50. Other diameters on request. Tape - 3mm. Available in 25, 50, 75, 100, 125, 150 mm width. Other widths on request. |
| Dimensions (mm) | Cloth - 1 mtr. Wide, 10 mtr. long. Rope & Tape - 25 mtr. Coils |
| Density (kg/m2) | Cloth & Tape 1.1 kg/m2 Rope 330 kg/m2 Depending on diameter |
| Thermal Conductivity (W/mK) (at mean temperature of 600°C depending on density ) | |
| Application Areas |
Available for Temperature 1260°C in FG & SS Reinforced. Cloth is used as thermal curtains, welding curtains, Tape and Rope are used for inspection door seals, gaskets, flange seals, expansion joints, pipe lagging, cable protection, Gas turbine insulation. |
WeDINESH METAL INDIAare one of the leading Stokist & Supplier ofStainless Steel Platesof India. And we believe that our productStainless Steel Plateswill always satisfy our customers.
| Material : Stainless Steel Range : We have firmly positioned ourselves as one of the leading High Tensile Steel Plates Exporters and SS Plates Suppliers based in India. Stainless Steel Plates offered by us are available in 300 & 400 series and ASTM A 240 TP 202, 304, 304L, 316, 316L, 321, 310, 317L, 409, 410, 410S, 430 and 904L specifications. Form: Our duplex steel plate is available with the following specifications: UNS NO. S31803, UNS NO. S32205, SAF 2205 300 & 400 Series. ASTM A 403 WP - TP 304, 304H, 304L, 304LN, 316, 316H, 316L, 316LN, 316Ti, 309, 310, 317L, 321, 347, 904L, etc |
Stainless Steel Plates
We offer a wide range of Stainless Steel Plate that is manufactured using state-of-the-art machines and latest technology. Our team of designer use latest CAD, CAM facilities to design the entire range as per latest market trends. In addition, our range is thoroughly checked at every stage of production to ensure the quality at par with international standards. Following are the features of our range of Stainless Steel Plate:
Salient Features:
High tensile strength
Corrosion resistance
Durability
Ceramic fibre paper is manufactured from high purity refractory fibres and designed for high temperature insulation. Advanced production techniques ensure uniform fibre distribution and close control of thickness and density. Ceramic refractory fibre paper is being produced from alumina silicate fibres with minimum addition of carefully selected bonds, which burn out cleanly in service. Moreover, the company is looked upon as one of the prime flexible ceramic fibre paper exporters from india.
Applications:
| Grades | (1) Cerafiber, Standard (2) Cerachemfiber, Zirconia |
| Classification Temperature(°C) |
(1) 1260 (2) 1400 (3) 1600 on request |
| Thickness | (1) 3, 5, 6, 8, 10 (2) 3, 5, 6, 8, 10 (3) On special request (4) Lower thickness available on specific request. |
| Dimensions (mm) | 500 x 1000 1000 x 1000 Other sizes on specific request |
| Density (kg/m2) | Min 150 |
| Thermal Conductivity (W/mK) (at mean temperature of 600°C depending on density ) | |
| Application Areas |
Gaskets. |
| Physical Properties | STD PAPER | AZS PAPER |
| Classification Temperature C | 1260 | 1425 |
| Al2O3 | >42 | >33 |
| SiO2 | <56 | < 52 |
| ZrO2 | --- | < 19.5 |
| Loss of Ignition | < 10 | < 10 |
| Density (Nominal ) (Kgf / m3) | 180 | 180 |
| Tensile Strength (Kgf / m2) | 9000 | 9000 |
| Linear Shrinkage | 2.0 (At 1100 C ) | 2.0 (At 1200 C ) |
WeDINESH METAL INDIAare one of the leading Stokist & Supplier ofStainless Steel Angleof India. And we believe that our productStainless Steel Anglewill always satisfy our customers.
| Range : We have firmly positioned ourselves as one of the leading High Tensile Steel Plates Exporters and SS Plates Suppliers based in India. Stainless Steel Plates offered by us are available in 300 & 400 series and ASTM A 240 TP 202, 304, 304L, 316, 316L, 321, 310, 317L, 409, 410, 410S, 430 and 904L specifications. Form:Our duplex steel plate is available with the following specifications: UNS NO. S31803, UNS NO. S32205, SAF 2205 300 & 400 Series. ASTM A 403 WP - TP 304, 304H, 304L, 304LN, 316, 316H, 316L, 316LN, 316Ti, 309, 310, 317L, 321, 347, 904L, etc |
Stainless Steel Angle
We offer a wide range of Stainless Steel Plate that is manufactured using state-of-the-art machines and latest technology. Our team of designer use latest CAD, CAM facilities to design the entire range as per latest market trends. In addition, our range is thoroughly checked at every stage of production to ensure the quality at par with international standards. Following are the features of our range of Stainless Steel Plate:
Salient Features:
High tensile strength
Corrosion resistance
Durability
Ceramic Rollers are hi-tech advanced ceramic products made with patented cool isostatic pressing technology, With superior strength in high temperature and excellent performance, Ceramic Rollers has gained very good reputation in the Market.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
We Stockis and Supplying of wide assortment of Veneering Modules to our clients, which is used to minimize the heat loss, which in turn saves the fuel to a great extent. Due to the protection provided by ceramic fiber, the refractory lining is also extended. Hot face veneering can be used for existing furnaces, kilns and heaters that feature good lining and do not need immediate replacements.
Characteristics:
Applications:
|
|||||||||||||||
|
Rakhial, Ahmedabad, Gujarat