We are offering swr pipes and fittings are manufactured by compounding upvc resin along with chemicals such as heat stabilizers, processing aids, lubricants, benzotriazole, phosphate based uv stabilizers which noticeably improves the light stability of upvc, prevents yellowing, embrittlement and loss of mechanical strength.

HDPE Pipes are manufactured from High Density Poly Ethylene Polymers i.e. PE-63, PE 80, PE 100. HDPE Pipes are available in sizes 20mm to 500mm (Size can be increased , if necessary) outer diameter and in pressure rating from 2.5 to PN 16.0.

Applications

Water Supply Systems

* In water supply distribution systems

* As a replacement of G. I. Pipes in Borewell application to submersible pumps.

* For suction and delivery lines of jet pumps and centrifugal pumps.

Industrial applications

* Disposal of corrosive effluents chemicals and treated / untreated wastes.

* Acids and Alkalies can be transported through these pipes.

* For conveying edible oils, fruit pulps, juices, milk and other food products.

* As ducts for Air conditioning and ventilation.

* For transporting slurries of Iron Ore, Fly Ash etc.

Environmental Protection

* HDPE Pipes are also used for industrial waste treatment plants and water treatment plants.

* For drainage of sewerage

* For disposal of sand slurry in dredging operations.

Advantages

* Low specific weight and flexibility

* Perfect weld ability, tough and strong

* Abrasion and wear resistant

* Good chemical and weathering resistance

* Low co-efficient of friction

Worldwide HDPE Sprinkler System is found to be the best method to get maximum yield at a low cost. It has been observed that, a sprinkler system can irrigate 2 to 3 times more farm land in the same quantum of water. The sprinkler helps in cleaning the surface of the plants, thereby helping them in easy photosynthesis . This results in greater yield. In winter season, the sprinkler system saves the surface of the plants from accumulation of frozen water and in summers it saves evaporation of water to the tune of 40%.The sprinkler system spreads the water in the farmland uniformly and thus saves the plants from water clogging and scarcity. Maximum water reaches the roots of the plants.

Product Range

HDPE Sprinkler pipes are available in sizes ranging from 63 mm to 200 mm outer diameter and pressure rating from Class I to IV, PN 2.5, PN 3.2, PN 4.0, PN 6.0 (Part I & II) with complete range to fittings.

Associated Accessories

* Coupled Bend

* Coupled Tee

* End Caps

* Riser Pipe

* Sprinkler Nozzle

* Pump Connecting Nipple (PCN)

* Sprinkler attachment with foot batton

We are offering upvc rigid & elastomeric seal ring fit pipe.This pipe is made of un - plastisized poly vinyl chloride (upvc). It is a versatile plastic having an excellent combination of strength, chemical inertness and fire resistance, which gives optimum performance at very low and very high temperatures like than 00 to 600 c for pressure rating as per is : 4985 - 2000.

This Pipe is made of un - plastisized Poly Vinyl Chloride (uPVC). It is a versatile plastic having an excellent combination of strength, chemical inertness and fire resistance, which gives optimum performance at very low and very high temperatures like than 00 to 600 C for pressure rating as per IS : 4985 - 2000.

Benefits

* Faster, easy installation of cable with lesser manpower.

* Feasibility of long lengths installation

* Easy movement of cable through bends

* Reduction in number of joints due to longer pipes

* Reduction in installation cost, maintenance and future upgradation

* Existing cables can be deployed after blowing from the duct.

* The pipes are non toxic in nature and hence safe to handle

Approximate use of Solvent Cement per joint of u PVC PipeO.D. Pipe (in Millimeters) 63 75 90 110 140 160 180 200 225 250 280 315.

Approx. No. of joints which can be 324 270 225 180 130 125 103 79 54 36Made per liter of solvent cement

Poly Ethylene Piping Systems are the most preferred means of transportation and distribution of water supply.These pipes are manufactured in the range of 20mm to 500 mm (Outer Diameter) in all pressure ratings. These pipes confirm to various International standards such as ISO 4427, BS 7281, DIN 807475 and BIS Standard IS: 14885.

MaterialPermanently Lubricated Ducts are manufactured by co-extrusion technique and the base raw material used is High Density Poly Ethylene.The grade of raw material is ultra violet grade confirming to IS : 7328-1992 and IS : 2523 or ISO : 1133 and is designated as PEELA 50T-012 (CACT approved ) ad inner layer is permanently Lubricated material DOW CORNING grade SOMB002.

Application

Telecommunication, Electric cable installation, Railways Information Network, Computer Networking, Cable Service Providers, Broad Band Network etc.

Advantages

* Faster Easy Installation of cable with lesser manpower

* Feasibility of longer lengths installation

* Easy movement of cable through bends

* Reduction in number of joints due to longer of pipes

* Reduction in installation cost, maintenance and future upgradation

* Existing cables can be deployed after de blowing from the duct

* The pipes are non toxic in nature and hence safe to handle

Dimensions

(DOT & ISO) all sizes are in mm

We are offering hdpe pipes are manufactured from high density poly ethylene polymers i.e. Pe-63, pe 80, pe 100. Hdpe pipes are available in sizes 20mm to 500mm (size can be increased , if necessary) outer diameter and in pressure rating from 2.5 to pn 16.0.

We are offering swr pipes and fittings are manufactured by compounding upvc resin along with chemicals such as heat stabilizers, processing aids, lubricants, benzotriazole, phosphate based uv stabilizers which noticeably improves the light stability of upvc, prevents yellowing, embrittlement and loss of mechanical strength.

HDPE Pipes are manufactured from High Density Poly Ethylene Polymers i.e. PE-63, PE 80, PE 100. HDPE Pipes are available in sizes 20mm to 500mm (Size can be increased , if necessary) outer diameter and in pressure rating from 2.5 to PN 16.0.

Applications

Water Supply Systems

* In water supply distribution systems

* As a replacement of G. I. Pipes in Borewell application to submersible pumps.

* For suction and delivery lines of jet pumps and centrifugal pumps.

Industrial applications

* Disposal of corrosive effluents chemicals and treated / untreated wastes.

* Acids and Alkalies can be transported through these pipes.

* For conveying edible oils, fruit pulps, juices, milk and other food products.

* As ducts for Air conditioning and ventilation.

* For transporting slurries of Iron Ore, Fly Ash etc.

Environmental Protection

* HDPE Pipes are also used for industrial waste treatment plants and water treatment plants.

* For drainage of sewerage

* For disposal of sand slurry in dredging operations.

Advantages

* Low specific weight and flexibility

* Perfect weld ability, tough and strong

* Abrasion and wear resistant

* Good chemical and weathering resistance

* Low co-efficient of friction

Worldwide HDPE Sprinkler System is found to be the best method to get maximum yield at a low cost. It has been observed that, a sprinkler system can irrigate 2 to 3 times more farm land in the same quantum of water. The sprinkler helps in cleaning the surface of the plants, thereby helping them in easy photosynthesis . This results in greater yield. In winter season, the sprinkler system saves the surface of the plants from accumulation of frozen water and in summers it saves evaporation of water to the tune of 40%.The sprinkler system spreads the water in the farmland uniformly and thus saves the plants from water clogging and scarcity. Maximum water reaches the roots of the plants.

Product Range

HDPE Sprinkler pipes are available in sizes ranging from 63 mm to 200 mm outer diameter and pressure rating from Class I to IV, PN 2.5, PN 3.2, PN 4.0, PN 6.0 (Part I & II) with complete range to fittings.

Associated Accessories

* Coupled Bend

* Coupled Tee

* End Caps

* Riser Pipe

* Sprinkler Nozzle

* Pump Connecting Nipple (PCN)

* Sprinkler attachment with foot batton

We are offering upvc rigid & elastomeric seal ring fit pipe.This pipe is made of un - plastisized poly vinyl chloride (upvc). It is a versatile plastic having an excellent combination of strength, chemical inertness and fire resistance, which gives optimum performance at very low and very high temperatures like than 00 to 600 c for pressure rating as per is : 4985 - 2000.

This Pipe is made of un - plastisized Poly Vinyl Chloride (uPVC). It is a versatile plastic having an excellent combination of strength, chemical inertness and fire resistance, which gives optimum performance at very low and very high temperatures like than 00 to 600 C for pressure rating as per IS : 4985 - 2000.

Benefits

* Faster, easy installation of cable with lesser manpower.

* Feasibility of long lengths installation

* Easy movement of cable through bends

* Reduction in number of joints due to longer pipes

* Reduction in installation cost, maintenance and future upgradation

* Existing cables can be deployed after blowing from the duct.

* The pipes are non toxic in nature and hence safe to handle

Approximate use of Solvent Cement per joint of u PVC PipeO.D. Pipe (in Millimeters) 63 75 90 110 140 160 180 200 225 250 280 315.

Approx. No. of joints which can be 324 270 225 180 130 125 103 79 54 36Made per liter of solvent cement

Poly Ethylene Piping Systems are the most preferred means of transportation and distribution of water supply.These pipes are manufactured in the range of 20mm to 500 mm (Outer Diameter) in all pressure ratings. These pipes confirm to various International standards such as ISO 4427, BS 7281, DIN 807475 and BIS Standard IS: 14885.

MaterialPermanently Lubricated Ducts are manufactured by co-extrusion technique and the base raw material used is High Density Poly Ethylene.The grade of raw material is ultra violet grade confirming to IS : 7328-1992 and IS : 2523 or ISO : 1133 and is designated as PEELA 50T-012 (CACT approved ) ad inner layer is permanently Lubricated material DOW CORNING grade SOMB002.

Application

Telecommunication, Electric cable installation, Railways Information Network, Computer Networking, Cable Service Providers, Broad Band Network etc.

Advantages

* Faster Easy Installation of cable with lesser manpower

* Feasibility of longer lengths installation

* Easy movement of cable through bends

* Reduction in number of joints due to longer of pipes

* Reduction in installation cost, maintenance and future upgradation

* Existing cables can be deployed after de blowing from the duct

* The pipes are non toxic in nature and hence safe to handle

Dimensions

(DOT & ISO) all sizes are in mm

We are offering hdpe pipes are manufactured from high density poly ethylene polymers i.e. Pe-63, pe 80, pe 100. Hdpe pipes are available in sizes 20mm to 500mm (size can be increased , if necessary) outer diameter and in pressure rating from 2.5 to pn 16.0.