Our Products
Trucks
1 Products availablePumps, Pumping Machines & Parts
1 Products availableLeading Manufacturer, Supplier & Retailer of crawler drilling rig, Combination Drilling Rig, Trolley Drilling Rig, Mini Truck Mounted Drilling Rig and Truck Mounted Drilling Rig.
DEW-600 Mini is design after market survey from our clients. For this it required only 10' feet (3mtr) drill pipe. By using DEW-600 you can drill up to max. 1000 feet (300mtr) in 4" (100mm) to 8" (200mm) drilling diameter. This product is driven by separate deck engine. So, we can improve its capacity by changes engine capacity. DEW-600 is mounted on various supports.
Depth: | 4 1/2" dia bore holes to a depth of 200mtr(600ft) using 3" drill rod |
---|---|
6 1/2" and 8" dia in steps bore holes to a depth of 150mtr(500ft) using 3" drill rod | |
10" dia bore holes to a depth of 50mtr (150ft) using 4.5" drill rod | |
Prime mover: | Through PTO drive from truck engine or seprate deck engine |
Mast: | 8" 'C' channel structure |
Max capacity- 8tons(17600lbs) | |
Height - 4.5 mtr (15ft) | |
Rod handling 3 mtr (10ft) | |
Break out: | To open the drill joints hydraulic break out cylinder of 300mm stroke will be provided |
Hydraulic system: | Hydraulic pressure : 175 kg/ cm2 (2500psi) |
Pull up speed : 6.9 mtr / min (23ft / min) | |
Pull up force : 3000kg (6600 lbs) | |
Pull down force : 2000kg (4400 lbs) | |
Pull down speed : 10.5 mtr/min (34ft / min) | |
Reeving ration: | 1:2 |
Rotary head: | Miximum torque 146kg-mtrs(12740 inch-lbs) |
Rotary head speed: | 0 To 120 |
Jack: | Four hydraulic leveling jack for proper levling drill point with seprate lever |
Water injection pump: | 80lpm water pump driven by hydraulic motor |
Optional attachment | Hydraulic motor drive mud pump |
DEW-2000 is specially required in that area where water level is very down means more than 400 mtr. Ethiopia, Somaliland is one of these types of countries. Now this product is very demanded from Ethiopian borehole contractor. For this it required 15? feet (3 mtr) drill pipe or 20? feet (6 mtr) drill pipe. This product model has only one option and that is two trucks mounted drilling rig. One for drilling rig unit deck engine drives hydraulic operation and second truck only for high air compressor with diesel tank. By using DEW-2000 you can drill up to max. 2000 feet (600mtr) in 4? (100mm) to 10? (250mm) drilling diameter.
Depth: | 10" dia bore holes to a depth of 600mtr(2000ft) using 4.5" drill rod |
---|---|
12" dia bore holes to a depth of 300mtr (1000ft) using 4.5" drill rod | |
Prime mover: | Seprate deck engine |
Mast: | 10" or 12" - 'C' channel box type structure |
Max capacity- 35tons(77161lbs) | |
Height - 9 mtr (30 ft) | |
Rod handling 4.5 mtr (15ft) | |
Casing pipe 6 mtr (20 ft) | |
Rod changer with auxillary winch: | Manually operated three rod changer with 2000kgs capacity pull up winch to carry drill pipes, hammer & other tools |
Break out: | To open the drill joints hydraulic break out cylinder of 300mm stroke will be provided |
Hydraulic system: | Hydraulic pressure : 224 kgs/cm2(3200psi) |
Pull up speed : 30.5 mtr / min (100 ft / min) | |
Pull up force : 18410kgs (40500 lbs) | |
Pull down force : 12635kgs (27800 lbs) | |
Pull down speed : 44 mtr/min (147 ft / min) | |
Reeving ration: | 1:3 |
Rotary head: | Miximum torque 146kg-mtrs(12740 inch-lbs) |
Rotary head speed: | 0 To 120 |
Water injection pump: | 150lpm water pump driven by hydraulic motor |
Optional attachment: | Hydraulic motor drive mud pump, welding machine, diesel or oil filling pump |
Suitable compressor: | 1100cfm@300psi; 1200cfm@415psi |
Jack: | Four hydraulic leveling jack for proper levling drill point with seprate lever |
Trolley is design after market survey from our clients. For this it required only 10' feet (3mtr) drill pipe. By using DEW-600 you can drill up to max. 1000 feet (300mtr) in 4" (100mm) to 8" (200mm) drilling diameter. This product is driven by separate deck engine. So, we can improve its capacity by changes engine capacity. DEW-600 is mounted on various supports.
Depth: | 4 1/2" dia bore holes to a depth of 200mtr(600ft) using 3" drill rod |
---|---|
6 1/2" and 8" dia in steps bore holes to a depth of 150mtr(500ft) using 3" drill rod | |
10" dia bore holes to a depth of 50mtr (150ft) using 4.5" drill rod | |
Prime mover: | Through PTO drive from truck engine or seprate deck engine |
Mast: | 8" 'C' channel structure |
Max capacity- 8tons(17600lbs) | |
Height - 4.5 mtr (15ft) | |
Rod handling 3 mtr (10ft) | |
Break out: | To open the drill joints hydraulic break out cylinder of 300mm stroke will be provided |
Hydraulic system: | Hydraulic pressure : 175 kg/ cm2 (2500psi) |
Pull up speed : 6.9 mtr / min (23ft / min) | |
Pull up force : 3000kg (6600 lbs) | |
Pull down force : 2000kg (4400 lbs) | |
Pull down speed : 10.5 mtr/min (34ft / min) | |
Reeving ration: | 1:2 |
Rotary head: | Miximum torque 146kg-mtrs(12740 inch-lbs) |
Rotary head speed: | 0 To 120 |
Jack: | Four hydraulic leveling jack for proper levling drill point with seprate lever |
Water injection pump: | 80lpm water pump driven by hydraulic motor |
Optional attachment | Hydraulic motor drive mud pump |
Suitable compressor: | 450cfm@175psi; 600cfm@200psi ; 900cfm@200psi |
DEW-750 is very hot in mining sector drilling industries. Because it is total easy to maintain. For this it required only 10? feet (3mtr) drill pipe or 15 feet (4.5mtr) drill pipe. Both options are available in this product. By using DEW-750 you can drill up to max. 1000 feet (300mtr) in 4? (100mm) to 8? (200mm) drilling diameter.
Depth: | 4 1/2" dia bore holes to a depth of 200mtr(750ft) using 3" drill rod |
---|---|
6 1/2" and 8" dia in steps bore holes to a depth of 150mtr(500ft) using 3" drill rod | |
10" dia bore holes to a depth of 50mtr (150ft) using 4.5" drill rod | |
Prime mover: | Through PTO drive from truck engine or seprate deck engine |
Mast: | 8" 'C' channel structure |
Max capacity- 8tons(17600lbs) | |
Height - 4.5 mtr (15ft) | |
Rod handling 3 mtr (10ft) | |
Rod changer with auxillary winch: | Manually operated three rod changer with 2000kgs capacity pull up winch to carry drill pipes, hammer & other tools |
Break out: | To open the drill joints hydraulic break out cylinder of 300mm stroke will be provided |
Hydraulic system: | Hydraulic pressure : 221 kg/ cm2 (3000psi) |
Pull up speed : 6.9 mtr / min (23ft / min) | |
Pull up force : 3000kg (6600 lbs) | |
Pull down force : 2000kg (4400 lbs) | |
Pull down speed : 10.5 mtr/min (34ft / min) | |
Reeving ration: | 1:2 |
Rotary head: | Miximum torque 146kg-mtrs(12740 inch-lbs) |
Rotary head speed: | 0 To 100 |
Jack: | Four hydraulic leveling jack for proper levling drill point with seprate lever |
Water injection pump: | 80lpm water pump driven by hydraulic motor |
Optional attachment: | Hydraulic motor drive mud pump |
Suitable compressor: | 450cfm@175psi; 600cfm@200psi ; 900cfm@200psi |
DEW-1000 is very hot in water well sector drilling industries. Specially in African countries. Most of African countries they have water level near around 300mtr. For this it required 15? feet (3 mtr) drill pipe or 20? feet (6 mtr) drill pipe. This product model have two options are available one is single truck mounted with truck engine drive hydraulic operation and second is two truck mounted deck engine drive hydraulic operation. By using DEW-1000 you can drill up to max. 1200 feet (370mtr) in 4? (100mm) to 10? (250mm) drilling diameter.
Depth: | 6 1/2" dia bore holes to a depth of 300mtr(1000ft) using 4.5" drill rod |
---|---|
10" dia bore holes to a depth of 150mtr (500ft) using 4.5" drill rod | |
Prime mover: | Through PTO drive from truck engine or seprate deck engine |
Mast: | 10" 'C' channel box type structure |
Max capacity- 17 tons(37400lbs) | |
Height - 8.2 mtr (27ft) | |
Rod handling 4.5 mtr (15ft) | |
Rod changer with auxillary winch: | Manually operated three rod changer with 2000kgs capacity pull up winch to carry drill pipes, hammer & other tools |
Break out: | To open the drill joints hydraulic break out cylinder of 300mm stroke will be provided |
Hydraulic system: | Hydraulic pressure : 221 kg/ cm2 (3000psi) |
Pull up speed : 37mtr / min (122ft / min) | |
Pull up force : 8591kg (18900 lbs) | |
Pull down force : 5897kgs (12973 lbs) | |
Pull down speed : 53 mtr/min (175ft / min) | |
Reeving ration: | 1:3 |
Rotary head: | Miximum torque 303kg-mtrs(26400 inch-lbs) |
Rotary head speed: | 0 To 100 |
Water injection pump: | 80lpm water pump driven by hydraulic motor |
Optional attachment: | Hydraulic motor drive mud pump, welding machine, diesel or oil filling pump |
Suitable compressor: | 900cfm@200psi; 1100cfm@300psi |
Jack: | Four hydraulic leveling jack for proper levling drill point with seprate lever |
DEW-2500 is specially required in that area where water level is very down means more than 600 mtr. Some time we got this requirement for 700mtr drilling depths. So, for those client we design this model. For this it required 15? feet (3 mtr) drill pipe or 20? feet (6 mtr) drill pipe. This product model has only one option and that is two trucks mounted drilling rig. One for drilling rig unit deck engine drives hydraulic operation and second truck only for high air compressor with diesel tank. By using DEW-2500 you can drill up to max. 2500 feet (750mtr) in 4? (100mm) to 10? (250mm) drilling diameter. In mud drilling by using mud pump you can drill up to Max. 1000 feet (300 mtr) in 22?(550mm) drilling diameter.
Depth: | 8" dia bore holes to a depth of 600mtr(2500ft) using 5.5" drill rod |
---|---|
10" dia bore holes to a depth of 450mtr (1500ft) using 5.5" drill rod | |
Prime mover: | Seprate deck engine |
Mast: | 10" or 12" - 'C' channel box type structure |
max capacity- 42tons(92594 lbs) | |
Height - 9 mtr (30 ft) | |
Rod handling 4.5 mtr (15ft) | |
Cassing pipe 6 mtr (20 ft) | |
Rod changer with auxillary winch: | Manually operated three rod changer with 2000kgs capacity pull up winch to carry drill pipes, hammer & other tools |
Break out: | To open the drill joints hydraulic break out cylinder of 300mm stroke will be provided |
Hydraulic system: | Hydraulic pressure : 246 kgs/cm2 (3500psi) |
Pull up speed : 30.5 mtr / min (100 ft / min) | |
Pull up force : 18410kgs (40500 lbs) | |
Pull down force : 12635kgs (27800 lbs) | |
Pull down speed : 44 mtr/min (147 ft / min | |
Reeving ration: | 1:3 |
Rotary head: | Miximum torque 146kg-mtrs(12740 inch-lbs) |
rotary head speed: | 0 To 160 |
Water injection pump: | 150 lpm water pump driven by hydraulic motor |
Optional attachment: | Hydraulic motor drive mud pump, welding machine, diesel or oil filling pump |
Suitable compressor: | 1100cfm@300psi; 1200cfm@415psi |
Jack: | Four hydraulic leveling jack for proper levling drill point with seprate lever |
DEW-DR 2500 is Direct Rotary drilling rig which is used only in Mud and sand area for 16" to 18" diameter up to 2500 feet ( 700 mtr ).
Depth: | 4 1/2" dia bore holes to a depth of 200mtr(600ft) using 3" drill rod |
---|---|
6 1/2" and 8" dia in steps bore holes to a depth of 150mtr(500ft) using 3" drill rod | |
10" dia bore holes to a depth of 50mtr (150ft) using 4.5" drill rod | |
Prime mover: | Through PTO drive from truck engine or seprate deck engine |
Mast: | 8" 'C' channel structure |
Max capacity- 8tons(17600lbs) | |
Height - 4.5 mtr (15ft) | |
Rod handling 3 mtr (10ft) | |
Rod changer with auxillary winch: | Manually operated three rod changer with 2000kgs capacity pull up winch to carry drill pipes, hammer & other tools |
Break out: | To open the drill joints hydraulic break out cylinder of 300mm stroke will be provided |
Hydraulic system: | Hydraulic pressure : 211kg/cm2 (3000psi) |
Pull up speed : 6.9 mtr / min (23ft / min) | |
Pull up force : 3000kg (6600 lbs) | |
Pull down force : 2000kg (4400 lbs) | |
Pull down speed : 10.5 mtr/min (34ft / min) | |
Reeving ration: | 1:02 |
Rotary head: | Miximum torque 146kg-mtrs(12740 inch-lbs) |
Rotary head speed: | 0 To 100 |
Water injection pump: | 80lpm water pump driven by hydraulic motor |
Optional attachment: | Hydraulic motor drive mud pump |
Suitable compressor: | 450cfm@175psi; 600cfm@200psi ; 900cfm@200psi |
Jack: | Four hydraulic leveling jack for proper levling drill point with seprate lever |
Our TR series is tractor mounted drilling rig. DEW-TR250 is tractor mounted drilling rig. By using DEW-TR250 you can drill up to max. 250 feet (76mtr) in 4" (100mm) to 8" (200mm) drilling diameter. For mud area we required centrifugal pump as water mud pump. Centrifugal pump is available in different capacity. We can design it on our client required drilling depth and diameter details. For hard rock required air compressor. It is also available in different models on capacity base. We can design it on our client required drilling depth and diameter details For this it required 10? feet (3 mtr) drill pipe. This product model series is required other vehicle for air compressor carrying. DEW-TR250 drilling rig drives by tractor engine through Power tack off gear box.
Additional Information:
Payment Terms : T/T
Delivery Time : 30 days
Depth: | 4 1/2" dia bore holes to a depth of 100mtr(330ft) using 3" drill rod |
---|---|
6 1/2" and 8" dia in steps bore holes to a depth of 80mtr(240ft) using 3" drill rod | |
10" dia bore holes to a depth of 50mtr (150ft) using 4.5" drill rod | |
Prime mover: | Through PTO drive from tractor engine |
Mast: | 6" 'C' channel structure |
Max capacity- 8tons(17600lbs) | |
Height - 4.5 mtr (15ft) | |
Rod handling 3 mtr (10ft) | |
Hydraulic system: | Hydraulic pressure : 140kg/cm2(2000psi) |
Pull up speed : 6.9 mtr / min (23ft / min) | |
Pull up force : 3000kg (6600 lbs) | |
Pull down force : 2000kg (4400 lbs) | |
Pull down speed : 10.5 mtr/min (34ft / min) | |
Reeving ration: | 1:02 |
Rotary head: | Miximum torque 146kg-mtrs(12740 inch-lbs) |
Rotary head speed: | 0 To 100 |
Water injection pump: | 80lpm water pump driven by hydraulic motor |
Optional attachment: | Hydraulic motor drive mud pump |
Suitable compressor: | 450cfm@175psi; 600cfm@200psi ; 900cfm@200psi |
Jack: | Four hydraulic leveling jack for proper levling drill point with seprate lever |
Our TR series is tractor mounted drilling rig. DEW-TR450 is tractor mounted drilling rig. By using DEW-TR450 you can drill up to max. 450 feet (140mtr) in 4" (100mm) to 8" (200mm) drilling diameter. For mud area we required centrifugal pump as water mud pump. Centrifugal pump is available in different capacity. We can design it on our client required drilling depth and diameter details. For hard rock required air compressor. It is also available in different models on capacity base. We can design it on our client required drilling depth and diameter details For this it required 10? feet (3 mtr) drill pipe. This product model series is required other vehicle for air compressor carrying. DEW-TR450 drilling rig drives by tractor engine through Power tack off gear box.
Depth: | 4 1/2" dia bore holes to a depth of 200mtr(600ft) using 3" drill rod |
---|---|
6 1/2" and 8" dia in steps bore holes to a depth of 150mtr(500ft) using 3" drill rod | |
10" dia bore holes to a depth of 50mtr (150ft) using 4.5" drill rod | |
Prime mover: | Through PTO drive from tractor engine |
Mast: | 8" 'C' channel structure |
Max capacity- 8tons(17600lbs) | |
Height - 4.5 mtr (15ft) | |
Rod handling 3 mtr (10ft) | |
Break out: | To open the drill joints hydraulic break out cylinder of 300mm stroke will be provided |
Hydraulic system: | Hydraulic pressure : 154kg/cm2 (2200psi) |
Pull up speed : 6.9 mtr / min (23ft / min) | |
Pull up force : 3000kg (6600 lbs) | |
Pull down force : 2000kg (4400 lbs) | |
Pull down speed : 10.5 mtr/min (34ft / min) | |
Reeving ration: | 1:02 |
Rotary head: | Miximum torque 146kg-mtrs(12740 inch-lbs) |
Rotary head speed: | 0 To 100 |
Water injection pump: | 80lpm water pump driven by hydraulic motor |
Optional attachment: | Hydraulic motor drive mud pump |
Suitable compressor: | 450cfm@175psi; 600cfm@200psi ; 900cfm@200psi |
Jack : | Four hydraulic levelling jack for proper levelling drill point with separate lever |
DEW-300 Hydraulic portable drilling rig is specially design for compact area of drilling. It means you just required 4.5 feet width 8 feet length and 9 feet height. For this it required only 5 feet drill pipe. By using DEW-300 you can drill up to 700 feet(220mtr) in 4"(100mm) to 6"(150mm) drilling diameter.
Depth: | 4 1/2" dia bore holes to a depth of 100mtr(300ft) using 3" drill rod |
---|---|
6 1/2" dia bore holes to a depth of 80mtr(240ft) using 3" drill rod | |
Prime mover: | Engine of 90hp for all opration. |
Mast: | 5" 'C' channel structure |
Max capacity- 6tons(13227lbs) | |
Height - 2.4mtr(8ft) | |
Rod handling 1.5mtr (5ft) | |
Hydraulic system: | Hydraulic pressure : 154kg/cm2 (2200psi) |
Pull up speed : 8.5 mtr / min (28ft / min) | |
Pull up force : 2694kg (5926 lbs) | |
Pull down force : 1814kg (3990 lbs) | |
Pull down speed : 12.5 mtr/min (48ft / min) | |
Reeving ration: | 1:2 |
Rotary head: | Miximum torque 146kg-mtrs(12740 inch-lbs) |
Rotary head speed: | 0 To 120 |
Jack: | Four hydraulic leveling jack for proper levling drill point with seprate lever |
Suitable compressor: | 450cfm@150psi ; 450cfm@175psi; 600cfm@200psi |