Dharam Pal Aggarwal And Sons

New Grain Market, Jalandhar, Punjab

Slight resinous matter (rust) and slight amounts of dry mould on wrappers, bale surfaces and interior sheets, found at time of delivery will not be objected to. Should “rust” or “dry mould” in an appreciable extend appear on more than 30% of the bales sampled, it shall constitute grounds for objection. Large bark particle, bubbles and small blisters, stains, over–smoked, slightly sticky rubber and blemishes of the amount and size shown in the sample are permissible. Slightly under dried rubber is permissible. Weak, heat, burnt, oxidized spots or streaks are not permissible. The rubber must be dry, firm, and free of blemishes except to the extent shown in the samples. Dirty packing, sand and all other foreign matter other than specified above is not permissible.

We provide superior quality Rubber Crumb that is used in various industrial applications. Rubber Crumb Powder is processed from the rubber scraps and used tyers. Rubber crumb is accessible in different grades of fineness as per the requirements. It is commonly used for making wide variety of products like Tyres, Automobile Parts, Hose Pipes, Mats, Conveyor Belts, V-Belts, Footwear, and so on. Apart from the above facts, we are reckoned as one of the trusted Crumb Rubber Suppliers in India. Source: Scrap, & Used Tyres.

Slight resinous matter (rust) and slight amounts of dry mould on wrappers, bale surfaces and interior sheets, found at the time of delivery will not be objected to. Should “rust” or “dry mould” in an appreciable extent appear on more than 10% of the bales sampled, it shall constitute grounds for rejection. Slight blemishes in colour, small bubbles and small specks of bark are permissible to the extent shown in the sample. Oxidized spots or streaks, weak, heated, under-cured, over-smoked, opaque and burnt sheets are not permissible. The rubber must be dry, strong and free of blemishes, blisters, sand, dirty packing and all other foreign matter other than those specified above as permissible.

We are a respected name from Jalandhar(India) and involved in catering to the varied demands of the customers. Buyers prefer us for our practice of delivering the orders within the pre-decided time frame.

SVR 3L(CV) is Technically Specified Rubber imported from Vietnam. Produced from field latex, it is used in performance tyres, industrial rollers and other applications requiring high quality, light coloured rubber. We are engaged in offering the high quality of raw rubber CV to our valuable clients in accordance to their requirements.

EPDM is mainly used for automotive parts and has excellent resistance to heat, ozone, and chemicals. Typical applications of EPDM are Inner Tubes, Conveyor belts etc. It is advisable not to use EPDM rubber if continual contact with petroleum based products is required. We deal in both Oil Extended and Non- Oil EPDM Rubbers of Mitsui Chemicals, Kumho, Keltan etc.

The grade must be produced under conditions wherein all processes are carefully and uniformly controlled. Each bale must be packed free of mould but very slight traces of dry mould on wrappers or bale surfaces adjacent to wrapper found at the time of delivery will not be objected to, provided there is no penetration of mould inside the bale. Oxidized spots of streaks, weak, heated, under-cured, over-smoked, opaque and burnt sheets are not permissible. The rubber must be dry, clean, strong, sound and evenly smoked, and free from blemishes, specks, resinous matter (rust), blisters, sand, dirty packing and any other foreign matter. Small pin-head bubbles, if scattered, will not be objected to. No master or official international sample has been established for this grade.

Natural Rubber Good Lot is dry material. It can be smoked or sun/air dried. We are one of the leading suppliers of Good Lot Rubber in Northern India.

Butyl rubber is an isobutylene copolymer with a small amount of isoprene. Butyl rubber is highly resistant to oxygen, ozone, and solutions of acids, alkalis and salt. It is majorly used in production of automobile inner tubes, hoses, etc.

Slight resinous matter (rust) and slight amounts of dry mould on wrappers, bale surfaces and interior sheets, found at the time of delivery will not be objected to. Should “rust” or “dry mould” in an appreciable extent appear on more than 20% of the bales sampled, it shall constitute grounds for rejection. Medium sized bark particles, bubbles, translucent stains, slightly sticky and slightly over-smoked rubber are permissible to the extent as shown in the sample. Oxidized spots or streaks, weak, heated, under-cured, over-smoked (in excess of the degree shown in the sample) and burnt sheets are not permissible. The rubber must be dry, firm and free of blemishes, blisters, sand, dirty packing and all other foreign matter other than those specified above as permissible.

We are engaged in offering the best quality Latex Rubber highly acclaimed in the market. We have established ourselves in the business of Wholesale Latex Rubber. The Liquid Latex Rubber offered by us has 60% DRC and is manufactured from the natural sources. It is a non- vulcanized liquid rubber used in producing Sports goods, Foam, Footwears, Surgical Gloves etc. We are capable of meeting the bulk requirement of latex rubber at the market leading prices.