Post Buy Requirement

Our Products

  1. Rubber Raw Materials 11 Products available
  2. Rubber & Rubber Products 10 Products available
  3. Industrial Chemicals 5 Products available
  4. Clean Room Equipment 4 Products available
  5. Filters 4 Products available
  6. Filters & Filtration Systems 3 Products available
  7. Clay

    2 Products available
  8. Industrial & Oil Seals

    2 Products available
  9. Reclaimed Rubber

    2 Products available
  10. Garden & Outdoor Furniture

    2 Products available
  11. Others Products 20 Products available

Filters

Our Complete range of products are Pre Filters, Bag Filters, Microvee Filters and HEPA Filters.

Pre Filters

Also known as rough filters or coil protection filters. Available from EU-1 to EU-4 as per European standards.

Applications:

Filters particles down to 10 to 20 microns with an efficiency of 85% to 95%. Recommended for comfort and non-critical industrial applications. They can be installed directly in AHUs or mounted in banks.

Media and Its Function:

Superior quality non-woven synthetic filter media, sandwiched between two layers of HDPE mesh which acts as a retainer and screens out large particles, thus, preventing them from being embedded in the media. The finer particles are filtered by the media.

Construction and Supports:

The pleating of the media enhances the filtration area for better efficiency. To eliminate the possibility of even a small amount of dirty air bypass, the media pack is securely bonded to the periphery of the enclosure frame using epoxy hardener.

Available in M.S. / Aluminium construction, powder coated/spray painted with synthetic enamel/epoxy paints.

View Complete Details

Bag Filters

Most flexible type of filters manufactured as per customer's requirements and are suitable for EU-5 and EU-6 operations.

Applications:

Filters particles down to 5 or 3 microns, with an efficiency of 85% to 95%. Recommended for dust extraction applications. It can be installed directly in AHUs.

Media:

Media is non-woven polyster fibres chemically bonded with scrim backing on the exit side. Other media can be provided as per reqirements.

Construction and Supports:

Electro galvanized steel rod grilles or anodized Aluminium grilles for bag support, which are sealed with the bags using polyurethane sealants. Bags are intra stitched to prevent bag ballooning and the holes are sealed using synthetic sealants.

View Complete Details

Microvee Filters

Also known as fine filters or 5 micron / 3 micron filters, & are suitable for both EU-5 and EU-6 operations.

Applications:

Filters particles down to 5 or 3 microns, with an efficiency of 99.9%. Recommended for industrial and class applications.

These filters can be directly installed in AHUs or mounted in banks in separate single skin plenums.

Media and Its Functions:

Superior quality non-woven synthetic filter media with regular labyrinthine structure being built of synthetic fibres, which are bonded together by a special resin. This media is sandwiched between two layers of HDPE mesh, which acts as a retainer.

Construction and Supports:

Large number of pleats of the media enhances the filtration area for better efficiency.

To improve the efficiency of the filters, they are made 100% leak proof by securely fixing the media pack to the periphery of the enclosure frame using epoxy harden

Available in M.S. / Aluminium construction with / without flange, and are powder coated/spray painted with synthetic enamel/epoxy paints.

View Complete Details

HEPA Filters

High efficiency particulate Air Filters are also known as Absolute filters, which are the ultimate means of removal of submicron air borne particles and are widely used for EU-13 applications.

Applications:

All HEPA filters assure a filter that is 99.97%, 99.99%, 99.997%, 99.999% efficient on particles of 0.3 micron in size or larger. Efficiencies of 50%, 65%, 95% are also available depending on the requirement.

These filters find wide usage in all clean room and pharmaceutical applications where class of cleanliness and particle count is a must. Can be installed directly in AHUs or in a plenum or can be terminally mounted.

Media:

Continuous sheet of non-combustible, water repellant, submicronic boro silicate glass fibre media. The radii edge configuration promotes maximum exposure of media surface to airflow.

Construction and Supports:

Pleated around radii edge corrugated aluminium separators. Available in aluminium filter frames with / without flange. However, S.S 304 filter frames are provided as per requirement.

A fluid fire retardant adhesive is provided, which when dry hardened provides a positive seal between filter pack and rigid frame. Also, a closed cell neoprene gasket is provided for positive sealing.

These filters can be either Deep pleat or Mini Pleat.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

Retailer of Filters from Jalandhar, Punjab by Dharam Pal Aggarwal & Sons
Post Buy Requirement

Our Products

  1. Rubber Raw Materials 11 Products available
  2. Rubber & Rubber Products 10 Products available
  3. Industrial Chemicals 5 Products available
  4. Clean Room Equipment 4 Products available
  5. Filters 4 Products available
  6. Filters & Filtration Systems 3 Products available
  7. Reclaimed Rubber

    2 Products available
  8. Garden & Outdoor Furniture

    2 Products available
  9. Clay

    2 Products available
  10. Industrial & Oil Seals

    2 Products available
  11. Others Products 20 Products available

Filters

Our product range contains a wide range of Pre Filters, Bag Filters, Microvee Filters and HEPA Filters

Pre Filters

Also known as rough filters or coil protection filters. Available from EU-1 to EU-4 as per European standards.

Applications:

Filters particles down to 10 to 20 microns with an efficiency of 85% to 95%. Recommended for comfort and non-critical industrial applications. They can be installed directly in AHUs or mounted in banks.

Media and Its Function:

Superior quality non-woven synthetic filter media, sandwiched between two layers of HDPE mesh which acts as a retainer and screens out large particles, thus, preventing them from being embedded in the media. The finer particles are filtered by the media.

Construction and Supports:

The pleating of the media enhances the filtration area for better efficiency. To eliminate the possibility of even a small amount of dirty air bypass, the media pack is securely bonded to the periphery of the enclosure frame using epoxy hardener.

Available in M.S. / Aluminium construction, powder coated/spray painted with synthetic enamel/epoxy paints.

View Complete Details

Bag Filters

Most flexible type of filters manufactured as per customer's requirements and are suitable for EU-5 and EU-6 operations.

Applications:

Filters particles down to 5 or 3 microns, with an efficiency of 85% to 95%. Recommended for dust extraction applications. It can be installed directly in AHUs.

Media:

Media is non-woven polyster fibres chemically bonded with scrim backing on the exit side. Other media can be provided as per reqirements.

Construction and Supports:

Electro galvanized steel rod grilles or anodized Aluminium grilles for bag support, which are sealed with the bags using polyurethane sealants. Bags are intra stitched to prevent bag ballooning and the holes are sealed using synthetic sealants.

View Complete Details

Microvee Filters

Also known as fine filters or 5 micron / 3 micron filters, & are suitable for both EU-5 and EU-6 operations.

Applications:

Filters particles down to 5 or 3 microns, with an efficiency of 99.9%. Recommended for industrial and class applications.

These filters can be directly installed in AHUs or mounted in banks in separate single skin plenums.

Media and Its Functions:

Superior quality non-woven synthetic filter media with regular labyrinthine structure being built of synthetic fibres, which are bonded together by a special resin. This media is sandwiched between two layers of HDPE mesh, which acts as a retainer.

Construction and Supports:

Large number of pleats of the media enhances the filtration area for better efficiency.

To improve the efficiency of the filters, they are made 100% leak proof by securely fixing the media pack to the periphery of the enclosure frame using epoxy harden

Available in M.S. / Aluminium construction with / without flange, and are powder coated/spray painted with synthetic enamel/epoxy paints.

View Complete Details

HEPA Filters

High efficiency particulate Air Filters are also known as Absolute filters, which are the ultimate means of removal of submicron air borne particles and are widely used for EU-13 applications.

Applications:

All HEPA filters assure a filter that is 99.97%, 99.99%, 99.997%, 99.999% efficient on particles of 0.3 micron in size or larger. Efficiencies of 50%, 65%, 95% are also available depending on the requirement.

These filters find wide usage in all clean room and pharmaceutical applications where class of cleanliness and particle count is a must. Can be installed directly in AHUs or in a plenum or can be terminally mounted.

Media:

Continuous sheet of non-combustible, water repellant, submicronic boro silicate glass fibre media. The radii edge configuration promotes maximum exposure of media surface to airflow.

Construction and Supports:

Pleated around radii edge corrugated aluminium separators. Available in aluminium filter frames with / without flange. However, S.S 304 filter frames are provided as per requirement.

A fluid fire retardant adhesive is provided, which when dry hardened provides a positive seal between filter pack and rigid frame. Also, a closed cell neoprene gasket is provided for positive sealing.

These filters can be either Deep pleat or Mini Pleat.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us