Dhanvanthri Engineers Pvt. Ltd

TTC Industrial Area, Navi Mumbai, Maharashtra

Spiral conveyors are ideal to transfer loads from level to level quickly and efficiently, without interrupting the conveyor process, without extra manual handling or transfers to other equipment. Theyre ideal for entresol, for multilevel buildings, or elevated conveyor lines.Convey cartons, totes, or any other load from level-to-level with unit load spiral conveyors

W or Multiple U Shaped Rolled Trough with Inner Screw Flights with Specific Diameter and Pitch connected to End Plates, Rubber Chemicals Process Industry Detergents Any, Powders Granules Rubber Chemicals Bulk Materials

Inclined Pipe Trough with Inner Screw Flights with Specific Diameter and Pitch on Pipe connected to End Plates, Powders Granules Bulk Materials.

Slat Plate connected to Roller Type Chain with detachable attachment for creating accumulation of slats at intervals. Assembly Lines Testing Lines Packing, From 200mm to 1200mm Wide, Automotive Components Electrical Components Unit Loads, Slat: M.S. Plate or frame with Corner Rollers; Structure: M.S., S.S. 304, Aluminum.

Deep Trough with Slats at a Pitch connected to Two chains on either sides fitted with a Scrapper to have maximum efficiency. Applications: Long Distance Conveying Containing & conveying Boiler Feeding. Effective Sizes: From 300mm to 1600mm Wide. Semi-Solid Materials Agriculture Produce Granules Specific Powders Baggase, Boiler Feed.

Belt systems are predominantly used for handling all types of packaging or loose products. Depending on the use, the belt finish can either be a grip surface for inclines, low friction or food quality, this is achieved using either rubber, PVC or specified materials. The frame construction can also be manufactured in various materials, eg, mild steel, powder coated, zinc coated or stainless steel.The types of product usually conveyed on belts are boxes in plastic or cardboard, beds, electrical components, coiled cable, waste paper, chemicals, motors etc. Fixed or Variable speed can be achieved via an externally mounted end drive unit, or motorised drum assembly. For reversing facility, a centrally mounted underslung motor would be used in conjunction with forward and reverse controls. For more integrated systems, a central external control panel would be used. Production requirements and facilities determine the construction and composition of the scheme.

Machined Pipe Rollers with End Bearings, Spring actuators, Cone Couplings, Welded Sprockets, common shaft and mounted at certain pitch on structure.

ZLP type: Wherever it is undesirable to have loads accumulating against one another, Zero Line Pressure versions enhance the flexibility of our powered roller systems, thus enabling the non-contact accumulation of goods. With the use of a simple electro magnetic brake, this zero line pressure arrangement negates the need for a complicated control system.

Lineshaft conveyor systems are purposely used when situations require back to back accumulation, but with as little pressure on the leading product as possible. This occurs via the design of the system which is that the lineshaft which is driven by the motor doesnt drive the belts directly but turns inside a nylon spool, driven via elastomer belts. By stopping the package on the roller the spool stops. This type of system is generally used in such places where final production stages require the packaging of products into cardboard / tote boxes. Therefore lineshaft powered roller conveyors are generally sought in warehousing / packaging environments

Slat Plate connected to Roller Type Chain with detachable attachment for creating accumulation of slats at intervals.Automotive Components Electrical Components Unit Loads

Roller Conveyors are mainly used to handle material like drums, boxes, trays, cartons pallets etc.Roller Conveyors are mainly used to handle material like drums, boxes, trays, cartons pallets etc.Machined Pipe Rollers with End Bearings and common Shaft mounted on Side frame at certain pitch through the length.

Our Engineering can design and supply a full range of conventional bulk materials handling conveyors and conveying equipment to handle minerals, components, packages, etc including the following:Flexible Sidewall Belt Conveyors belts fitted with flexible sidewall and cross cleats (often called pocket belts) are used to carry dry materials at much steeper angles and often in swan neck configurations.

Sometimes also called as Escaveyors, are used for Box Carton Lifting chain conveyor for Horizontal Vertical transport. Unit + On-Floor + No Accumulate. Used for low-frequency intermittent vertical transfers. Carrier used to raise or lower a load to different levels of a facility (e.g., different floors andor mezzanines). Differs from a freight elevator in that it is not designed or certified to carry people. Can be manually or automatically loaded andor controlled and can interface with horizontal conveyors. Also called: Conveyor Integrated Continuous Lifts (CICL) Vertical Reciprocating Conveyors (VRC) Continuous Vertical Lifts (CVL)

Shallow Bucket shaped for Inclined Travel in a continuous array connected to a two strand chain at both sides.Inclined Conveying Machinery Link-up

Carrying and Moving Toughed Belt for material conveying with Belt resting on transom Angular rollers or Bent sheet slide bed with structure and supports complete with drive units.

Trough Belt Conveyors are designed to leverage the open frame and trough effect of the rubber belt to fully contain the load of materials. Trough belt conveyors are the most widely used and efficient means of moving bulk materials because they are manufactured to Convey high tonnage of materials, handle a gradual curved concave or convex incline path over long runs, convey horizontal

Canopy conveyors are a cost effective alternative to steel and can be supplied in either transparent or a choice of coloured tinted sheeting.
Canopy conveyors designed to offer easy access for maintenance.
Canopy conveyors are used in mining.

Bulk Materials Handling Conveyors
Our Engineering can design and supply a full range of conventional bulk materials handling conveyors and conveying equipment to handle minerals, components, packages, etc including the following:
Troughed Belt Conveyors widely used in industry to move large quantities of materials such as sized stone, sandand gravel, woodchips, sewage sludges, chemical fertilisers, etc.

Flexible Sidewall Belt Conveyors belts fitted with flexible sidewall and cross cleats (often called pocket belts) are used to carry dry materials at much steeper angles and often in swan neck configurations.

Bucket Elevatorsof either the belt and bucket or chain and bucket used to vertically lift materials where space prevents the use of conventional conveyors.

Scraper Conveyorsutilising either engineered or round link chains for stickier materials or for where it is desirable to transport the materials in an enclosed manner.

Box Feedersof either the chain and slat or chain and flight type where quantities of material such as brickworks clay can be stored and fed out in a controlled manner to suit process requirements.

Flat Belt Conveyorsof either the pan deck or roller bed type to handle components, packages, bulk top lift bags, etc.

Flat Belt Feedersused under hoppers fed by front loaders or similar plant or machinery where a controlled feed out is required.

Chain and Slat Conveyorsused to move heavy items such as pallets of bricks or other palletised items.

Gravity or Powered Roller Conveyorsoften used to move packages in warehouses and packing departments.

Overhead Type Chain Conveyorsused to transport components along assembly lines etc.

Woven wire belts special belts woven from steel wire to carry hot items, or to allow wet items to drain.

As with all other conveyor and materials handling products and industries, we have extensive experience in bulk handling projects, supplying components, conveyors and complete systems. Bulk handling equipment for many diverse applications, including mobile units for stockpiling and ship-loading, static systems for transport, stockpiling, screen and silo feeding.

The extensive range of components include standard and specialised troughing idlers, impact idlers, return rollers and drums. The experience of component supply enables us to design conveyors and systems to provide the most economical, efficient and reliable schemes. Our spares division is able to manufacture spares to short lead-times and ship individual or multiple items for replacement or repair to a support our installation across world wide locations.

Standard Troughing Idlers

Impact Troughing Idlers

Self Aligning Troughing Idlers

Plain Return Idlers

Chevron Rubber Lagged Drum

Multi-Tier Conveyor allow the option to expand the conveyor line upward.
Perfect for delivery and take-away systems or inspection systems, unfinished or uninspected packages can be delivered on one conveyor, then placed on another conveyor when finished.
Conveyors can move in different directions and at different speeds.

Incline belt conveyors are virtually the same as the flat belt conveyor, however, they are designed to carry the product up an incline.
Inclined Carrying and Moving Flat or Cleated Belt for material elevating with Belt resting on Carrying rollers or Flat sheet slide bed with structure and supports complete with drive units.

Controlled Atmosphere conveying with Minimum Spillage and with Dust extraction nozzles and rubber based seals for protection of conveyed material.

corrugated Side walls represent the latest state-of-the-art design ideas and manufacturing techniques.
Spill Protected Conveying for Horizontal or Inclined Conveying with Corrugated Side walled Belt in place of plain belt.
Another important design feature is that the Side walls can be pressed from both sides when mounting. This offers much higher bond strengths and security.

Flat Belt Conveyors with Centre Drive for Forward/Reverse Movement and Mounted on Powerised Trolley for Left/Right.

Flat Belt conveyor Pivoted at Rear end and having two positions at discharge end actuated by pneumatic cylinder at specified time cycle based on PLC Control Logic and sensors.

Flat Belt Conveyor moving at centre with both side stationary Tables to suit requirement of operation on conveyor.

Machined Pipe Rollers with End Bearings and common Shaft mounted on Side frame at certain pitch through the length.

As we all know, Gravity is free and making the best use of it to convey items is an easy and effective solution to material handling problems.This type of roller conveyor offers good support for the bottom surfaces of the items to be conveyed. Therefore, the items with irregular bottom surfaces, such as drums or older cartons and boxes can be conveyed on the gravity roller conveyor.

Roller Conveyors are mainly used to handle material like drums, boxes, trays, cartons pallets etc.Roller Conveyors are mainly used to handle material like drums, boxes, trays, cartons pallets etc.
Machined Pipe Rollers with End Bearings and common Shaft mounted on Side frame at certain pitch through the length.

Powerised Roller Conveyors are used to carry load at controlled speed. Roller to Roller transmission chain driven roller conveyors are used where the properties of the item are not suitable for easy movement with gravity and also where dirt, oil, grease and other contamination are present. The driving chain or chains are at any one end of the rollers and are covered from the surrounding environment.
These conveyors can be designed for a accumulating type of equipment by converting the rollers into a power & free type of configuration.