Write a Review
Our Products
Roll Forming & Bending Machines
1 Products availableIndustrial Cleaning Machine
1 Products availableSeparating Machines
1 Products availableSpm Machine
1 Products availableFilters & Filtration Systems
1 Products availableChemical Machinery & Plant
1 Products availableFood Processing Machines & Plants
1 Products availableLeading Manufacturer, Supplier & Retailer of ATS Pulper Machine, Head Box Machine, R.F.Former machine, Cylinder Mould with VAT Machine and Wire Part Section.
| Design to remove unwanted particles like Staples, Stones Screws, Nails, Pabbles and other debris from stock and it collected in the reject chamber. | |
| The Reject Chamber is provided with a glass which helps to observe the rejection collected in to chamber. | |
| Clogging free operation. | |
| It protects the rotating part of refiners, deflakers and other down stream equipment against excessive wear and breakage. | |
| Zero fiber loss. | |
| Motorized model is available. | |
| Customized HD cleaner up to 2500 LPM are also manufactured. | |
| Fabricated with S.S. 304 and 316 material. |
|
|||||||||||||||||||||||||||||||||||
| Effective Separation of heavy & light material (Metal pieces, Pins, Plastics) from pulp. | |
| Easy maintenance and minimum fiber loss. | |
| The body is made out of mild steel with S.S. cladding. Special model is also available in S.S. 316 Sandwitch plate (S.S. and M.S.) with base frame and stifners in M.S. | |
| A cyclone effect is formed in the separator by the S.S. Rotor, So heavy particle are carried outward by centrifugal force to the junk trap. The light rejection is further treated in secondary separator or vibrating screen. |
| Size | |||||||||||||||||||||
|
| Slushing waste paper/broke/virgin pulp in a continues or batch operation. | |
| Low to medium consistency (4 to 6%) | |
| M.O.C. S.S. 316 to M.S. Sandwitch plate fabricated & as per requirement. | |
| Power consumption is reduced. | |
| Dynamically balanced S.S. Pulper impeller with hydrodynamically designed vanes. | |
| Easy Maintenance. | |
| Capacity up to 16 cubic meter. |
| ATS Pulper |
| Low Consistency (2 to 3%) | |
| Used for slashing of all type of waste paper and machine, Broke from paper machine. | |
| Power efficient pulper with continuous application. | |
| You can chose S.S. Perforated screen of 5 to 8 mm. Hole depending upon your raw material quality requirements. | |
| Different size depending on requirements from 3m to 14m volumetric, capacity. | |
| For automization suitable belt conveyor of 800 mm to 1200 mm width is optionally supplied. | |
| M.O.C. S.S.316 to M.S. Sandwitch Material or as per requirement. |
| Treatment of rejects from high consistency cleaner and other screening. | |
| Remove rejects like plastic, knots etc. | |
| Easy Maintenance. | |
| Size as per requirements. | |
| Made from M.S. fabricated body with S.S. 304 Screen. | |
| Perforated Screen of 2.5 to 3.0 mm hole. |
| Energy efficient agitators find application in all type of Pulp Storage Chests, including Height Density Towers, Mixing Chest & Machine Chest. | |
| The sturdy design incorporate Bearings & Glands. located outside, optimally designed adjustable propeller blades. All parts coming in contact with stock made of stainless steel, the agitators are highly energy efficient and have the | |
| Provision for adjusting the vane angle to suit specific process requirement of gentle or strong agitation. |
| Hi-Con pulper With Dilution Pulper |
| Slushing waste paper/broke/virgin pulp in a continues or batch operation. | |
| Low to medium consistency (4 to 6%) | |
| M.O.C. S.S. 316 to M.S. Sandwitch plate fabricated & as per requirement. | |
| Poconsumptionis reduced. | |
| Dynamically balanced S.S. Pulper impeller with hydrodynamically designed vanes. | |
| Easy Maintenance. | |
| Capacity up to 16 cubic meter. |
| Open type head box made out of the S.S. 304 plate suitable for low and medium speed paper machine up to 350 m/min. | |
| Tapered flow header for uniform velocity conditions. | |
| Uniform cross direction basic weight profile. | |
| Two holly rolls maintain defloculation or fiber dispersion. | |
| Easy accessibility of inside area for cleaning & easy of operation. | |
| Stability of flow. | |
| Minimum Maintenance. | |
| Foam killing shower also provided. |
| Excellent former assembly for good formation and paper pick up of 32 to 120 gsm. | |
| Mould & vat completely made out of S.S. material. | |
| Suitable for machine up to 120mt. speed. | |
| Minimum profile variation. | |
| Tapered manifold for uniform velocity condition and evener roll for good defloculation. | |
| Zero fibers loss due to rubber sealing. |
| Cylinder Mould With Vat |
| It is the heart of a paper/board machine. | |
| It controls stick flow, pickup on the felt part and is responsible for good single layer/multi layer formation & substance profile across the full web. | |
| Designed according to Production requirements. | |
| M.O.C of Cylinder Mould. | |
| We also supply phosphorous/S.S./ Bronze spiders with bronze strips with 10 gauge S.S. wire wounding on request. | |
| Tapered flow header for uniform velocity condition. Design type of Vat. | |
| Counter Flow Vat- This type used for mainly in Board M/C & Slow Speed. | |
| Uniflow Flow Vat- This type used for good formation of Craft board & duplex board. | |
| DRY VAT TYPE | |
| Increase in formation pressure. | |
| Shortening of the forming zone. | |
| Reduction in the amount of water carry-over from the inside of mould. | |
| Possibility of regulation the flow speed of stock suspension in forming zone. | |
| Reducing the effect of centrifugal force. |
| Wire Part Section |
| Designed for formation & drainage capacity optimization. | |
| Wire Section is available either with cantilever type or run out type wire changing arrangement. | |
| We also provide Top wire arrangements for multi layer & High gsm. | |
| Consist of lot of drainage elements such as forming board, hydro foils, high Vacuum box to improve sheet formation. | |
| All parts in contact with water or stock are made of S.S. and corrosion resistant materials. | |
| Complete S.S. cladding structure is also available. |
| The highest possible dryness should be reached with least possible number of nips. | |
| Pressing must not impact paper quality. | |
| The press section should compact, Simple and rigid Structure. | |
| Hydraulic & Pneumatically loaded press rolls with heavy duty framing. | |
| Press section is designed for 180kg. - liner cm. load for efficient water removal. | |
| It is double felted first nip for two sided dewatering used for higher efficiency of press. | |
| Heavy duty press section with roll dia 430 to 1200 mm. | |
| For high speed application grooved or blind-drilled roll is available. | |
| Large diameter presses at high press load combine optimum performance with low investment, operation and maintenance cost. | |
| Production increase, reduced steam consumption and efficiency increases in case of rebuilt of an exciting machine. |
| Dryer Section |
| Dryer Section designed to optimize the drying rate, reducing the investment cost. | |
| M.S. Fabricated dryers up to 2.0 mt. Dia and 25 mm to 36 mm shell thickness and the width up to 5 mt. | |
| Dryer is suitable for 4 to 5 kg/ cm2 operating pressure. | |
| The dryers are mirror finished and the width up to 5 mt. | |
| Our dryer system components are designed to provide best drying efficiency and uniform drying control. | |
| Heavy duty cast iron framing is also available its excellent for vibration dampening. | |
| The drying cylinder can be provided with stationary syphons or inside bucket system for proper removal of condensate. (Optionally). | |
| For high speed application above 200 m/min rope feeding arrangement is provided. |
Ketan Patel (Devraj Papertech Machinery)
10/3,A, Phase - |, G.I.D.C, Near. Vatva Railway Crossing, Ahmedabad - 382 445, Gujarat - 382445
Share us via
