Dev Precision Engineers

Jagnath Plot, Rajkot, Gujarat

Besides above spares we can also supply other spares for Lister CS Engines 9/1 & JP Engines like Piston, Piston Rings, Cylinder Liner and Bearings

Details:

• Lister copper cylinder head gasket shim fits Lister 9-1 and JP engines from 1 cylinder to 6 cylinders.
• The gasket Shim Fits Lister 9/1, JP, JP2, JP3, JP4 & JP6 with bore of 4.5 or 114.30 mm.
• Gasket Shim Fits all single & Multi cylinder models.
• It is used when there is a higher gap between cylinder and head after fitting the standard gasket.

Besides Main Bearings Set We can also supply following Parts : Connecting rod bearing shells, - 40563 / 000E0563 (Standard / Under Size) DV20, DV24, DV29, DV32, DV36 and DV48 Big End Bearings / Plejlstangspander, st / Pleuellager, Satz Main bearing liner - 000E 4765 / 000E4765 (Standard / Under Size) DV36 and DV48 Hovedlejeforing, standard Hauptlager, Laufbuchse

A high quality replacement Bimetal bearings for Bukh DV20, DV24, DV29 and DV32 2 CYL MARINE DIESEL ENGINE.

Also Suitable for Single Cylinder DV10 Engines.

Oil Pump Bushing Set for Sabroe SMC 100 T/S/L/E Compressor

• A quality Bronze Con Rod Bush for use in Sabroe 100 T/S/L/E Compressor. Fits SMC T, SMC S, SMC L, and SMC E bore of 100 mm.
• Oil Pump Bush set of 15mm and 20mm Length of 2 Pc each Fits SMC 104 106 108 112 116 and TSMC 108 and 116 and HPC 104 106 108 Mk4 Sabroe 100 T/S/L/E Compressor.
• The Bushing is a Part of 3141.187 Complete RT pump.
• A quality aftermarket Bronze Journal bearing RT Pump Bushing Fits SMC T, SMC S, SMC L and SMC E Compressor Bore of 100 mm.

Order Piston Assy Separately to make a Cyl. Barrel Kit complete PISTON ASSEMBLY Comprising DEV - 572-50122 1  PISTON 2 PISTON RING SET Comprising  DEV - 572-50622 5 Ring Set 3  GUDGEON PIN 4 CIRCLIP  2 Pc 351-50090  

• LISTER Petter HR HRW HL Cylinder Block – DEV 353-80971
• A Part of LISTER HR HRW HL Cylinder Barrel Piston KIT
• Graded cast iron Cylinder Block of standard Size Fits all Lister HR, HRW and HL Series engines
• Widely used as Stationary, Marine and Industrial engines of single or Multi Cylinder
• HL4, HL6, HLT6, HR2, HR3, HR4, HR6, HR2M, HR3M, HR4M, HR6M, HRW2, HRW3, HRW4, HRW6, HRW2M, HRW3M, HRW4M and HRW6M

Description:

• Lister LT series Single And multi cylinder are used as Stationary Engine, A Single Cylinder engine will need a single set a 2 cylinder Engine will need 2 Sets. A Replacement PISTON Set suitable for LISTER Petter LT1 & LT2 Engines.
• Set of Lister LT Cylinder Block / Barrel  DEV 601-30271 without piston assembly DEV 601-51145.
• Please buy Piston Assembly 601-51145 separately includes  Piston, Ring Set, Pin and circlip.
• We are pleased to offer Graded cast iron Cylinder Block / Barrel standard Size Fits all Lister Petter LT Series engines.

Our Cylinder Block Kit OFFER & REFERENCE PART NUMBERS

• CYLINDER BARREL, BLOCKS: DEV 201-50632 1 Pc
• PISTON ASSEMBLY Comprising : DEV 570-10940
• 1 GUDGEON PIN : 1 Pc
• 2 PISTON : 1 Pc
• 3 PISTON RING SET Comprising : DEV 570-12140 1 Set
• 4 CIRCLIP : 2 Pc

Description:

• Lister SR Cylinder Barrel Kit Set.
• A quality cast cylinder fully machined Bore 88.90 mm or  3.500″ or 3 1/2 inch .
• Along with Graded LM13 Aluminum Alloy replacement piston Assembly.
• Comes complete with Ring Set, a gudgeon pin and a pair of circlips.

Widely used as Stationary, Marine and Industrial engines of single or Multi Cylinder TR1, TR2, TR3, TL2, TL3. These will fit all TR engines, and TL engines from 1985 onwards, so from 3500064TL2 and 3500231TL3. TL engines prior to these numbers used a four ring piston; the three ring Piston set can be used on the engine. In case needed please contact us before ordering.We Are offering Free piston ring set along with it. so that whole assy. is complete  

We are pleased to offer a new replacement Cylinder Bock Suitable For TR and TL Engine Bore 98.425 mm / 3.875″ / 3 7/8 . A quality cast cylinder supplied fully machined. Along with Graded LM13 Aluminum Alloy replacement piston of standard Size Fits all Lister Petter TR / TL Series engines, comes complete with Ring Set, a gudgeon pin and a pair of circlips. Please select the correct size for your engine.

Lister TR TL Cylinder Barrel Kit Set Ref PART NUMBERS

• CYLINDER BARREL, BLOCKS  DEV 570-35530  1 Pc
• PISTON ASSY. Comprising  DEV 570-33360
• 1 GUDGEON PIN –  1 Pc
• 2 PISTON –  1 Pc
• 3 PISTON RING SET Comprising –  DEV 570-33370 1 Set
• 4 CIRCLIP –  2 Pc

Description:

• A new Split Type Liner Bearing Metal Shell Lower Half a Replacement Spare Parts for Turbines.
• Bearing Liner Bottom 412223-3 
• We are offering a Brand New Pair of Elliott Stem Turbine Bearing Top and Bottom Half Pc. These are made from high quality Babbitt Material
• We can also supply other Elliott Stem Turbine Bearings in Trimetal in case needed.
• This is a Liner Bearing, lower Half for a Primary Reformer Draft Fan for a Elliott Co. Steam or gas Turbine also sometimes referred as Turbo.

A new Split Type Liner Bearing Metal Shell Lower and upper Half a Replacement Spare Parts for Turbines.

• Bearing Liner Bottom 412270-3 and
• Bearing Liner Top 412270-2

Description:

• We are offering a Brand New Pair of Elliott Stem Turbine Bearing Top Half Pc. These are made from high quality Babbitt Material
• We can also supply other Elliott Stem Turbine Bearings in Trimetal in case needed.
• This is a Liner Bearing, lower and upper Half for a Primary Reformer Draft Fan for a Elliott Co. Steam or gas Turbine also sometimes referred as Turbo.

Description:

• A new Split Type Liner Bearing Metal Shell Lower Half a Replacement Spare Parts for Turbines.
• Bearing Liner Bottom 412270-3
• A Brand New Pair of Elliott Stem Turbine Bearing Bottom Half Piece.
• Made from high quality Babbitt Material.