Dev Precision Engineers

Jagnath Plot, Rajkot, Gujarat

These Bearings are used in following Engines and Models Kubota Engine or Tractor Models - V1505-E4B, D1105-E4B, D1105-E4B, V1305-E4B, D1305, D905, B1700, B1710, B2100, B2110, B2400, B2410, B2710 L1-26, L1-28, L1-285, L1-265, L1-295, L1-315, Z650, Z850, Z750, D1100, D1101, D1102, V1500, V1501, V1502, Z851, D1402, D1302, DH1101, D1301, V1702, V1902

Description:

• Kubota V1505 D1005 D1105 Big End Bearing
• We can also supply Dev 16241-2231
• We offer new set of big end (connecting rod) bearing shells for the Kubota type of diesel engine. Kubota High quality CL Bimetal (Copper Lead  Alloy) big end bearing in export worthy packaging.
• Kubota V1505 D1005 D1105 Connecting Rod Bearing Pt No Dev 16241-22310
• These are Std. bearings for 40 mm Shaft Dia.

The offer is of 1 Pair of Big End Bearing. In case you have 1 Cylinder Engine (DV10) - You will need - 1 Pair 2 Cylinder Engine ( DV20 DV24 DV29 ) - You will need - 2 Pairs 3 Cylinder Engine (DV32 DV36 DV48) - You will need - 3 Pairs

Description:

• Number of cylinders 1, 2 and 3 Cyl
• Bore x stroke 3.35 x 3.35 in (85 x 85 mm)
• Bukh DV20 DV10 Big End Bearing PN 000E0563
• Big End bearings are suitable for Bukh DV20 DV24 DV29 DV32 DV36 DV10 DV48 D10 Engines
• Connecting rod bearing shells Standard Size Part Number 40563 or Pt. No.000E0563
• Big End Bearings / Plejlstangspander, st / Pleuellager, Satz

Description:

• A quality Con Rod Bearings for use in Sabroe 100 T/S/L/E Compressor. Fits SMC T, SMC S, SMC L, and SMC E bore of 100 mm.
• A quality aftermarket Half section Shell Bearings Fits SMC T, SMC S, SMC L, and SMC E Compressor Bore of 100 mm.
• Please order 1 Pair for each cylinder for Sabroe 100 Refrigeration compressor.
• Big End Bearings Fits SMC 104 106 108 112 116 and TSMC 108 and 116 and HPC 104 106 108 Mk4 Sabroe 100 T/S/L/E Compressor.
• The Bearing is part of Connecting rod assembly complete Pt No 3123-004 and 3123-006 a Part for Service Kit 3188-090.

A new Split Type Shell Bearing Liner Top and Bottom Pc a Replacement Spare Parts Of New Elliott Group Steam Turbines.

• Bearing Liner Top   412169-1
• Bearing Liner Bottom 412169-2

ELLIOTT Babbitt Bearing 4121692 4121691.

• A Brand New Pair of Elliott Steam Turbine Bearing Set of Top Half and Bottom Half Pc.
• These are Babbitt Bearings as per OE Design.

These Bearing design features a steel backing for support, a cast-copper lead alloy center for strength and a overlay of casted Babbitt metal for slipperiness, conform ability and embed ability. The intermediate cast-copper lead layer creates and interlocked columnar structure capable of withstanding much heavier pulsating loads than any other bearing design. They are more resistant to corrosion and out-perform traditional Babbitt or Bimetal bearings by 10-20% or more.

A new Split Type Shell Bearing Liner Top and Bottom Pc a

• Bearing Liner Top   412169-1
• Bearing Liner Bottom 412169-2

Trimetalic Bearings are made from high quality Material and are much much superior then regular Babbitt Bearings available in the Markets.

ELLIOTT Trimetal Bearing 4121692 4121691.

• New Pair of Elliott Steam Turbine Bearing Set.
• Set of Top Half & Bottom Half Pc.
• Replacement Spare Parts Of New Elliott Group Steam Turbines.
• Though we can supply Elliott Stem Turbine Bearings in Babbitt alloy also in case needed.

This is a Liner Bearing, lower Half for a Primary Reformer Draft Fan for a Elliott Co. Steam or gas Turbine also sometimes referred as Turbo.

A new Split Type Liner Bearing Metal Shell Lower and upper Half a Replacement Spare Parts for Turbines.

• Bearing Liner Bottom 412223-3 and
• Bearing Liner Top 412223-2

Description

• A Brand New Pair of Elliott Stem Turbine Bearing Top and Bottom Half Pc.
• Bearing is Made from high quality Babbitt Material
• We can also supply other Elliott Stem Turbine Bearings in Trimetal in case needed.

Description:

• A new Split Type Liner Bearing Metal Shell  upper Half a Replacement Spare Parts for Turbines.
• We are offering a Brand New Pair of Elliott Stem Turbine Bearing Top and Bottom Half Pc. These are made from high quality Babbitt Material
• We can also supply other Elliott Stem Turbine Bearings in Trimetal in case needed.
• This is a Liner Bearing, lower Half for a Primary Reformer Draft Fan for a Elliott Co. Steam or gas Turbine also sometimes referred as Turbo.
• Bearing Liner Top 412223-2

Description:

• A new Split Type Liner Bearing Metal Shell Lower or Bottom Half a Replacement Spare Parts Of New Elliott Group Steam Turbines.
• Bearing Liner Bottom 603360-23.
• We are offering a Brand New Pair of Elliott Stem Turbine Bearing Bottom Half Pc.
• These are made from high quality Babbitt Material.
• We can also supply other Elliott Stem Turbine Bearings in Babbitt alloy in case needed.
• This is a Liner Bearing, lower Half for a Primary Reformer Draft Fan for a Elliott Co. Steam or gas Turbine also sometimes referred as Turbo.

Description:

• We are offering a Brand New Pair of Elliott Stem Turbine Bearing Upper Half Pc.
• These are made from high quality Babbitt Material.
• We can also supply other Elliott Stem Turbine Bearings in Babbitt alloy in case needed.
• A new Split Type Liner Bearing Metal Shell Upper or Top Half a Replacement Spare Parts Of New Elliott Group Steam Turbines.
• This is a Liner Bearing, lower Half for a Primary Reformer Draft Fan for a Elliott Co. Steam or gas Turbine also sometimes referred as Turbo.

These Bearing design features a steel backing for support, a cast-copper lead alloy center for strength and a overlay of casted Babbitt metal for slipperiness, conform ability and embed ability. The intermediate cast-copper lead layer creates and interlocked columnar structure capable of withstanding much heavier pulsating loads than any other bearing design. They are more resistant to corrosion and out-perform traditional Babbitt or Bimetal bearings by 10-20% or more ie OE White Metal With Steel, Wj2 S25c,

Shinko RB4 Turbine Bearing Metal Pt No Q2260-7We are offering a Brand New Pair of Shinko Turbine Pump Bearing Set of Top Half and Bottom Half Pc. These are Trimetalic Bearings are made from high quality Material and are much much superior then regular Babbitt Bearings available in the Markets.

• Shinko RB4 Turbine Bearing Metal Pt No Q2260-7.
• A new Split Type Shell Metal Bearing Liner Top and Bottom Pc a Replacement Spare Parts Of Shinko IND. LTD.
• Cargo Oil Pump Turbine .
• Bearing Metal Part No DEV Q2260-7 or RP 2115.
• Dwg Th61001  Model-Rx1 / RB4.

These Bearing design features a steel backing for support, a cast-copper lead alloy center for strength and a overlay of casted Babbitt metal for slipperiness, conform ability and embed ability. The intermediate cast-copper lead layer creates and interlocked columnar structure capable of withstanding much heavier pulsating loads than any other bearing design. They are more resistant to corrosion and out-perform traditional Babbitt or Bimetal bearings by 10-20% or more ie OE White Metal With Steel, Wj2 S25c,

• We are offering a Brand New Pair of Shinko Turbine Pump Bearing Set of Top Half and Bottom Half Pc.
• These are Trimetalic Bearings are made from high quality Material and are much much superior then regular Babbitt Bearings available in the Markets.
• Shinko RB4 Turbine Bearing Metal Q2260-8.
• A new Split Type Shell Metal Bearing Liner Top and Bottom Pc a Replacement Spare Parts Of Shinko IND. LTD.
• Cargo Oil Pump Turbine .
• Bearing Metal Part No Q2260-8 or 2116
• Dwg Th61001  Model-Rx1 / RB4

These Bearing design features a steel backing for support, a cast-copper lead alloy center for strength and a overlay of casted Babbitt metal for slipperiness, conform ability and embed ability. The intermediate cast-copper lead layer creates and interlocked columnar structure capable of withstanding much heavier pulsating loads than any other bearing design. They are more resistant to corrosion and out-perform traditional Babbitt or Bimetal bearings by 10-20% or more ie OE White Metal With Steel, Wj2 S25c,

• We are offering a Brand New Pair of Shinko Turbine Pump Thrust Bearing Set of Top Half and Bottom Half Pc.
• These are Babbitt Based Bearings are made from high quality Material as per OE JIS WJ2 S25C.
• Shinko RB4 Turbine Thrust Bearing Metal Q 2270-8.
• A new Split Type White Metal With Steel Thrust Bearing Metal  2 Pc a Replacement Spare Parts Of Shinko IND. LTD.
• Cargo Oil Pump Turbine .
• Bearing Metal Part No Q2270-8 or 2118
• Dwg Th61001  Model-Rx1 / RB4

We are offering a Brand New Pair of Shinko Turbine Pump Thrust Bearing Set of Top Half and Bottom Half Pc.

These are Babbitt Based Bearings are made from high quality Material as per OE JIS WJ2 S25C.