GST : 24AOBPG5770Q1ZL
Verified
Write a Review
Our Product / Services
Fire Fighting & Protection
1 Services availablePressure Reducing Valve
1 Products availableDigital Control Valve
1 Products availablePressure Reducing Station
1 Products availableSeparators & Strainers
1 Products availableWe offer a complete product range of Digital Control Valve, Slug Control Valves:, Pressure Reducing Valve, Slow Acting Check Valve: and Solenoid Valve
Digital control valves are multi stage set-stop valve. Digital Control valves is an electrically actuated, hydraulically operated multi-function control valve.
Models:-DA 1110 (Globe Y-Pattern), DA 110 (Globe Straight Pattern), DA 110-ACT (Anti-Cavitation Trim) for high pressure differential & low flows.
Application:-These are used for control of clean liquids, set-stop. Gas Terminals, Ship loading & Unloading. Used extensively in loading terminal automation systems in refineries, storage tanks used for accurate & effective filling of tankers & wagons.
Construction:-Has 2 solenoid valves, receiving signal from batch controllers to position the valve for low flow/medium flow/high flow conditions as required & programmed.
Size:-25 NB 750 NB
Material of Construction:-Carbon Steel, Alloy Steel, Stainless Steel, Nickel, Monel, Bronze other material as required.
Additional Information:
Payment Terms : L/C, D/A, T/T,
Packaging Details : Wooden
Delivery Time : 1-20 weeks
Filter Separator control valve with Float pilot.
The valve is installed on Filter Separator along with complete Float Operated Control System to monitor and control the water level in the Separator. In the event, water level rises above certain level, the Slug Control Valve (Fueling Valve) will close automatically and Water Drain Valve will open allowing the Water to Drain.
Once the water level drops to safe level the Fueling Valve opens allowing the Fueling to start and Drain Valve closes. Entire system is foolproof for Aircraft Fueling.
Size: 25 NB 750 NB.
Pressure Class: ANSI 150# & 300#.
Materials: Carbon Steel, Alloy Steel, Stainless Steel etc.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : Standard
Delivery Time : 4-16 Weeks
Automatically reduces a higher inlet pressure to a constant lower outlet pressure. The valve consists of a main valve and (Fig. 55) pressure reducing control pilot. Slight changes in downstream pressure acts on topside of control diaphragm causing main Valve to counteract pressure changes and hold a constant outlet pressure.
The regulator will reduce the upstream pressure to a constant downstream pressure regardless of the change in flow rates/or inlet pressure. The pilot is a Normally Open valve that senses the downstream pressure.
Models: DA 355 (Globe), DA 3550 (Angle).
Size: 25 NB 750 NB.
Spring Range: Standard: 20-175 Psig, Optional: 5-35 Psig.
Materials: Carbon Steel, Alloy Steel, Stainless Steel etc.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Export Wooden
Delivery Time : 30 to 120 Days
Non return function, closes automatically in case of reversal flow. The valve allows flow when inlet pressure is higher than outlet pressure. In case of reverse flow, the valve closes within appropriate time to ensure it does not generate any surge / water hammer. Ideal for Air craft fuelling application. Valve opens and closes at controlled (adjustable) speed to ensure smooth flow.
Models: DA 3110
Size: 25 NB 750 NB.
Materials: Carbon Steel, Alloy Steel, Stainless Steel etc.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : Standard
Delivery Time : 4-16 Weeks
Operated by two way three way solenoid pilot valve, a Solenoid Control Valve is an on-off control valve that either open or closes upon receiving an electrical signals to the solenoid pilot control, provides two position [ On-Off ] Operation. The main valve opens fully or closes drip tight depending upon the actuation position of the solenoid, energized to open/energized to close. The valve may be remotely operated by timers, relays, probes or any triggered device to the solenoid.
Models: DA 9110
Size: 25 NB 750 NB.
Materials: Carbon Steel, Alloy Steel, Stainless Steel etc.
Additional Features: Electronic Flow control & metering system (Dual Solenoid).
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Standard
Delivery Time : 4 to 20 weeks
gas pressure regulator/low pressure reducing valves.
models: dp 266hp/bp/lp
function: these dp 266hp are self actuated, either spring or diaphragm operated for accurate control of gas pressure for maximum combustion efficiency in commercial gas installations. the regulator maintains the outlet pressure, irrespective of fluctuation in inlet pressure in the pipeline.
application: these high capacity regulators are used in air, nitrogen, natural gas, hydrogen etc. industrial gases.
size: 15 nb 150 nb
pressure rating: 150# & 300#
max. inlet pressure: 20 kg/cm2
max. outlet pressure: 50mm wc.
material of construction: carbon steel, stainless steel, duplex steel, etc.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Standard
Delivery Time : 4 to 20 weeks
A Pilot (Solenoid) operated Booster pump control valve is designed for Installation on the discharge of Booster pump to control opening & closing on pump start up and shut down, eliminates pipe surges.
The pump starts against the close valve, when the pump is started, the solenoid control is energized and the valve begins to open slowly, gradually increase the line pressure to full opening head. when the pump is signaled to shut off the solenoid control is de-energized and the valve begins to close slowly, gradually reducing flow, while the pump continues to run.
A three-way solenoid valve controls the valve operations equipped with hydraulic check feature to close valve on pressure reversal and shut off pump in event of pump failure. Valve and pump operations are interlocked by limit switch assembly.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : Standard
Delivery Time : 6-16 Weeks
electric actuator is directly mounted on control valve.
optional accessories: limit switches, potentiometer, hand wheel assembly, weather proof/explosion proof enclosure, inbuilt positioners, position transmitter. actuators are available for single & three phase current supply.
size: 25 nb 300 nb.
ratings: 150#, 300# & 600#.
input signal: 4 20 ma
output signal: 4 20 ma.
materials: carbon steel, alloys steel, stainless steel, duplex steel, nickel al. bronze alloys etc.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : Standard
Delivery Time : 6-16 Weeks
DEVaaM make Pneumatic control valves are Mfg. for any control application. This valves are Mfg. for the harshest process, including extreme pressure drops. We have various models as mentioned below, All the below models are available with Direct & Reverse Acting actuators. Standard accessories like Pneumatic positioners, Electro/Pneumatic positioners, Manual override etc. are available.
Size: 25 NB 750 NB.
Pressure Ratings: 150#, 300#, 600#, 900#, 1500#.
End Connection: Flange End, Butt-weld & Socket weld.
Materials: Carbon Steel, Alloy Steel, Stainless Steel, Duplex, Monel, Nickel, Al., Bronze alloys etc.
DC-210-1:-(Single Seated, Globe, Unbalanced Design). Top Guided, this valve is most widely used in major fluids like Air, Water, Steam, Gas, Oil etc. It has extreme working conditions & applications. This valve is very easy to maintain.
DC-230-2:-(Single seated, Globe, Balanced Design), Cage Guided. This valve is most suitable for application in Air, Clean Gases & Liquids/Fluids. As these valves has much better response & very high stability.
DC-250-2:-(Single Seated, Globe) Top & Bottom Guided. This valve is most suitable for high working pressure & high pressure drop
DC-270-2:-(Double Seated, Globe). Top & Bottom Guided. This valves is used for high flow capacity (Cv value) & high pressure differential such as Boiler feed water, etc.
DC-290-3:-(3-Way Mixing & Diverting) Skirt & Top Guided. This valve is used for thermic fluid, Steam, Cooling water, etc. where excess amount of fluid has to be bypassed.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Standard
Delivery Time : 6-16 weeks
Automatically reduces a higher inlet pressure to a constant lower outlet pressure. The valve consists of a main valve and (Fig. 55) pressure reducing control pilot. Slight changes in downstream pressure acts on topside of control diaphragm causing main Valve to counteract pressure changes and hold a constant outlet pressure.
The regulator will reduce the upstream pressure to a constant downstream pressure regardless of the change in flow rates/or inlet pressure. The pilot is a Normally Open
valve that senses the downstream pressure.
Models: DA 355 (Globe), DA 3550 (Angle).
Size: 25 NB 750 NB.
Spring Range: Standard: 20-175 Psig, Optional: 5-35 Psig.
Materials: Carbon Steel, Alloy Steel, Stainless Steel etc.
Additional Features:
Pressure Reducing/Sustaining.
Pressure Reducing/Check
Pressure Reducing/Solenoid On-Off.
Pressure Reducing/Surge
Pressure Reducing/Low Flow By-Pass.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Seaworthy Packaging as per ISO & international standards.
Delivery Time : 0-120 Days
Function: Series DP 876 are pilot operated used for Air & Gas services, In single stage, pressure reduction can be achieved very precisely upto 1/10 of the inlet pressure. Pilot operation with pressure downstream pressure & with very minimum errors & fluctuation.
Size: 50 NB 200 NB
Pressure Class: 150# & 300#.
Material: Carbon Steel, Stainless Steel, Duplex Steel, Super Duplex Steel. etc.
Application: Used in Natural Gas Pressure reducing stations, where inlet pressure is very high, but requires precise downstream pressure.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Standard
Delivery Time : Depends on Quantity
Manager (DEVaaM Industries)
Santej-Vadsar road,, Ahmedabad, Gujarat - 382721, India
Share us via
View Contact Number 
