Features

• Excellent esthetic with high polishability
• Beautiful Flow has been created to harmoze light transmission (as appears in enamel) and light diffusion (as appears in dentin) within the material to achieve an ideal shade match to suit any clinical case without the indluence of background color

Fluoride Release & Recharge

• Similar mechanism as Giomers
• As a feature of S-GPR fillers that has a stable phase of glass ionomers, Beautiful Flow has fluoride release and recharge that reversibly responds to the concentration of fluoride in the mouth similar to traditional glass ionomers without causing any material deformity.

Directions to Use

• A. Anterior and posterior restorations
• A-1. Cleaning of tooth surface Thoroughly clean the tooth surface to remove plaque
• A-2. Shade selection Select appropriate shade using a shade guide while the tooth is still moist
• A-3. Cavity preparation Prepare the cavity following the conventional method
• A-4. Isolation Isolate with a rubber dam
• A-5. Pulp protection In the case where the affected area is close to the pulp, cap the pulp with calcium hydroxide etc.
• A-6. Conditioning and application of adhesive Apply dentin adhesive following the manufacturer’s instructions for use
• A-7. Setting of a Needle Tip Follow the instructions below to attach the BEAUTIFIL Needle Tip provided.
• A-8. Placement Apply necessary amount of BEAUTIFIL Flow directly into the cavity and create the shape desired. BEAUTIFIL Flow may also be extruded onto a paper pad to be applied into the cavity with a suitable instru- ment
• A-9. Light-curing Light-cure using a dental light-curing unit.
• A-10. Finishing and polishing After light-curing, contour, finish and polish the restora- tion following the conventional method

B. Base / Liner

• B-1. Follow ″A-1″-″A-7″ procedures of Anterior and posterior restorations above
• B-2. Base / Liner Apply necessary amount of BEAUTIFIL Flow directly into the cavity and create the shape desired. BEAU- TIFIL Flow may also be extruded onto a paper pad to be applied into the cavity with a suitable instrument. Light-cure the material using a dental light-curing unit (Halogen : 30 sec. or LED : 10 sec.)
• B-3. Placement Fill direct composite resin
• B-4. Finishing and polishing After light-curing, contour, finish and polish the restora- tion following the conventional method.

Features

• Automatic injection
• Crack free
• Light-weighted
• Can inject the resin at low pressure

Features

• Exposes pulpcapping and pulpotomy
• Treatment of external resporation
• Temporary filling material to root canal
• Forms secondary dentine

Key Features

• Acid & chemical resistant
• Increased plunger life
• Light-weight

Directions

• Acid & chemical resistant
• Increased plunger life
• Light-weight

Features

• Excellent esthetic with high polishability
• Beautiful Flow has been created to harmoze light transmission (as appears in enamel) and light diffusion (as appears in dentin) within the material to achieve an ideal shade match to suit any clinical case without the indluence of background color

Fluoride Release & Recharge

• Similar mechanism as Giomers
• As a feature of S-GPR fillers that has a stable phase of glass ionomers, Beautiful Flow has fluoride release and recharge that reversibly responds to the concentration of fluoride in the mouth similar to traditional glass ionomers without causing any material deformity.

Directions to Use

• A. Anterior and posterior restorations
• A-1. Cleaning of tooth surface Thoroughly clean the tooth surface to remove plaque
• A-2. Shade selection Select appropriate shade using a shade guide while the tooth is still moist
• A-3. Cavity preparation Prepare the cavity following the conventional method
• A-4. Isolation Isolate with a rubber dam
• A-5. Pulp protection In the case where the affected area is close to the pulp, cap the pulp with calcium hydroxide etc.
• A-6. Conditioning and application of adhesive Apply dentin adhesive following the manufacturer’s instructions for use
• A-7. Setting of a Needle Tip Follow the instructions below to attach the BEAUTIFIL Needle Tip provided.
• A-8. Placement Apply necessary amount of BEAUTIFIL Flow directly into the cavity and create the shape desired. BEAUTIFIL Flow may also be extruded onto a paper pad to be applied into the cavity with a suitable instru- ment
• A-9. Light-curing Light-cure using a dental light-curing unit.
• A-10. Finishing and polishing After light-curing, contour, finish and polish the restora- tion following the conventional method

B. Base / Liner

• B-1. Follow ″A-1″-″A-7″ procedures of Anterior and posterior restorations above
• B-2. Base / Liner Apply necessary amount of BEAUTIFIL Flow directly into the cavity and create the shape desired. BEAU- TIFIL Flow may also be extruded onto a paper pad to be applied into the cavity with a suitable instrument. Light-cure the material using a dental light-curing unit (Halogen : 30 sec. or LED : 10 sec.)
• B-3. Placement Fill direct composite resin
• B-4. Finishing and polishing After light-curing, contour, finish and polish the restora- tion following the conventional method.

Features

• Excellent esthetic with high polishability
• Beautiful Flow has been created to harmoze light transmission (as appears in enamel) and light diffusion (as appears in dentin) within the material to achieve an ideal shade match to suit any clinical case without the indluence of background color

Fluoride Release & Recharge

• Similar mechanism as Giomers
• As a feature of S-GPR fillers that has a stable phase of glass ionomers, Beautiful Flow has fluoride release and recharge that reversibly responds to the concentration of fluoride in the mouth similar to traditional glass ionomers without causing any material deformity.

Directions to Use

• A. Anterior and posterior restorations
• A-1. Cleaning of tooth surface Thoroughly clean the tooth surface to remove plaque
• A-2. Shade selection Select appropriate shade using a shade guide while the tooth is still moist
• A-3. Cavity preparation Prepare the cavity following the conventional method
• A-4. Isolation Isolate with a rubber dam
• A-5. Pulp protection In the case where the affected area is close to the pulp, cap the pulp with calcium hydroxide etc.
• A-6. Conditioning and application of adhesive Apply dentin adhesive following the manufacturer’s instructions for use
• A-7. Setting of a Needle Tip Follow the instructions below to attach the BEAUTIFIL Needle Tip provided.
• A-8. Placement Apply necessary amount of BEAUTIFIL Flow directly into the cavity and create the shape desired. BEAUTIFIL Flow may also be extruded onto a paper pad to be applied into the cavity with a suitable instru- ment
• A-9. Light-curing Light-cure using a dental light-curing unit.
• A-10. Finishing and polishing After light-curing, contour, finish and polish the restora- tion following the conventional method

B. Base / Liner

• B-1. Follow ″A-1″-″A-7″ procedures of Anterior and posterior restorations above
• B-2. Base / Liner Apply necessary amount of BEAUTIFIL Flow directly into the cavity and create the shape desired. BEAU- TIFIL Flow may also be extruded onto a paper pad to be applied into the cavity with a suitable instrument. Light-cure the material using a dental light-curing unit (Halogen : 30 sec. or LED : 10 sec.)
• B-3. Placement Fill direct composite resin
• B-4. Finishing and polishing After light-curing, contour, finish and polish the restora- tion following the conventional method.

Features

• Automatic injection
• Crack free
• Light-weighted
• Can inject the resin at low pressure

Features

• Exposes pulpcapping and pulpotomy
• Treatment of external resporation
• Temporary filling material to root canal
• Forms secondary dentine

Key Features

• Acid & chemical resistant
• Increased plunger life
• Light-weight

Directions

• Acid & chemical resistant
• Increased plunger life
• Light-weight

Features

• Excellent esthetic with high polishability
• Beautiful Flow has been created to harmoze light transmission (as appears in enamel) and light diffusion (as appears in dentin) within the material to achieve an ideal shade match to suit any clinical case without the indluence of background color

Fluoride Release & Recharge

• Similar mechanism as Giomers
• As a feature of S-GPR fillers that has a stable phase of glass ionomers, Beautiful Flow has fluoride release and recharge that reversibly responds to the concentration of fluoride in the mouth similar to traditional glass ionomers without causing any material deformity.

Directions to Use

• A. Anterior and posterior restorations
• A-1. Cleaning of tooth surface Thoroughly clean the tooth surface to remove plaque
• A-2. Shade selection Select appropriate shade using a shade guide while the tooth is still moist
• A-3. Cavity preparation Prepare the cavity following the conventional method
• A-4. Isolation Isolate with a rubber dam
• A-5. Pulp protection In the case where the affected area is close to the pulp, cap the pulp with calcium hydroxide etc.
• A-6. Conditioning and application of adhesive Apply dentin adhesive following the manufacturer’s instructions for use
• A-7. Setting of a Needle Tip Follow the instructions below to attach the BEAUTIFIL Needle Tip provided.
• A-8. Placement Apply necessary amount of BEAUTIFIL Flow directly into the cavity and create the shape desired. BEAUTIFIL Flow may also be extruded onto a paper pad to be applied into the cavity with a suitable instru- ment
• A-9. Light-curing Light-cure using a dental light-curing unit.
• A-10. Finishing and polishing After light-curing, contour, finish and polish the restora- tion following the conventional method

B. Base / Liner

• B-1. Follow ″A-1″-″A-7″ procedures of Anterior and posterior restorations above
• B-2. Base / Liner Apply necessary amount of BEAUTIFIL Flow directly into the cavity and create the shape desired. BEAU- TIFIL Flow may also be extruded onto a paper pad to be applied into the cavity with a suitable instrument. Light-cure the material using a dental light-curing unit (Halogen : 30 sec. or LED : 10 sec.)
• B-3. Placement Fill direct composite resin
• B-4. Finishing and polishing After light-curing, contour, finish and polish the restora- tion following the conventional method.