Our Products
Buckets
1 Products availableSteel & Steel Products
1 Products availableMetal Furniture Suppliers
1 Products availableMetal Sheets
1 Products availableMetal & Metal Products
1 Products availableHardware Fittings And Accessories
1 Products availableIron Ore
1 Products availableLeading Manufacturer, Supplier & Retailer of Earthmoving Bend Parts.
| We are one of the largest Traders and service providers in HR/CR segment in Western India. Product conform to national and international standards.Available in coil/slit/sheet form.We represent big steel manufacturers like JSW Ispat, SAIL, Uttam, etc At any given point of time we have more than 7000mt of HR/CR material in our stock at two locations viz., Mumbai and Pune . we cater to wide spectrum of Customers /Users for their JIT requirements on regular basis. We can cater to our buyers requirements in most of the Thicknesses, Grades, Sizes, Length and Width. We supply in tailor made or customized sizes. We also ship the Plates/Sheets/Blanks duly Oiled and Pickled as per the buyersrequirement in 20containers, We can supply in Small Quantities | |
| Sr. No. | GRADES | THK. (mm) | Width |
| 1 | Hot Rolled – En 10025 S235JR, Fe 410, St 37, St 42, IS2062 A, SH 41, CG/CR, SH29, SH20 Al, SH29 Am, MC2052, MC410, WT41, WG 29, | 3,4,5,6,8,10, 12,16, 20, 25 | 150 mm to 2000 mm |
| 2 | High Tensile – En 10025 S355 , En 10149 S355 MC, ST 52.3, QSTE 380 TM, Fe 510, TR46 | 3 mm to 30 mm | 150 mm to 2000 mm |
| 3 | Cold Rolled – IS 513, St 37, St 12 | 0.30 to 3.00 mm | 150 mm to 1500 mm |
| 4 | Chequered Plates CP41 | 3 to 10mm | 1000 mm to 1500 mm |
| We are one of the leading Importers of Gas Based HBI/DRI in India | |
| We have constant in flow of HBI/DRI and can cater to buyers immediate requirements | |
| We import these products from reputed manufacturers from Middle East, Iran, Ukraine, etc | |
| We represent big steel manufacturers like JSW Ispat, SAIL, Uttam, etc | |
| We have been dealing in these products since 1990 and have complete technical expertise of the products and its application/usage | |
| We have a team of Engineers to carry out Trails at our customers end |
| HBI | DRI | ||
| Type A | Type B | Type A | Type B |
| Total Iron: 90.50% Min | Total Iron: 90% min | Fe Total: 90.5% | Metallization :90.% Min Fe (total) : 89% min |
| Metallic Iron: 84.05 Min | Metallic Iron: 85% Min. | Fe M: 85% | Fe Metal :80% min |
| Metallization: 93.50% Min | Metallization: 94% Min. | Metn: 93.50% | SiO2 :4% max |
| Carbon: 1.2 – 2.0% | Carbon: 1.20% Min. | C: 1.70% | Al2O3 :0.80% max |
|
Total Gangue: |
Sulphur: 0.010% Max. |
SiO2:2.20% | C :1.20% min. |
| Max Sulphur: 0.005% max | Phosphorous: 0.020% max. |
Al2O3: 0.50% | S :0.002% |
| Phosphorus: 0.05% Max | CaO: 0.80% | P :0.10% max | |
| MgO : 0.20% | |||
| Phosphorus: 0.030% | |||
| Sulphur: 0.001% | |||
| PHYSICAL PROPERTIES | PHYSICAL PROPERTIES | Size Distribution: | Size Distribution: |
| Bulk Density: 2.4-2.8 Tons/M3 | Bulk Density:2.4-2.8 Tons/M3 | Size <6.3 mm 5% max | 0-6 mm :1.558 |
| Apparent Density: 4.7 gm/cc Min | Apparent Density: 4.7 gm/cc Min | 6-16 mm :98.397 | |
| +16 mm :0.045 | |||
| We are one of the leading traders of Coal Based Sponge Iron manufactured by various units in India. We have the infrastructure and cater the demand of Induction Furnace and Electric ARC Furnace. We have complete technical expertise of the product including its application/usage.
| |
| Physical | Chemical | ||
| Size | (4 – 18 ) mm | Fe (M) | 80% (min) |
| Non – Mag | 0.7%. | Fe (T) | 89% |
| Bulk Density | 1.6 – 2 MT / M3 | Mtz | (90± 2%) |
| Carbon | 0.30% Max | ||
| Sulphut | 0.03% Max | ||
| Phosphorous | 0.05% max | ||
| We deal in Mild Steel Ingots/Billets used in manufacture of TMT Bars, Angles, Channels and BeamsWe can supply Mild Steel Ingots/Billets in various sizes and grades | |
| We manufacture MS Angles/Channels/Beams of various sizes | |
| We supply the material duly Straighten | |
| We can supply in required Sizes and Grades required by the buyer | |
| MS Angles are used for Transmission and Tele Communication Towers after HDG and Fabrication | |
| We have modern Laboratory for testing of Raw material and Finished Products |
| We can supply Pellets both in DR grade and BF grades | |
| High quality Indian Pellets acts as a feed stock for sponge Iron Plants | |
| Indian Pellets are low in Sulphur and Phosphorus. |
|
Particulars Chemical (ON DRY BASIS) |
Grade % | Tolerance | |
| Fe | 65 | Minimum | |
| FeO | 0.3 | Maximum | |
| SiO2 + Al2O3 | 0.5 | Maximum | |
| CaO | 0.03 | ± 0.01 | |
| MgO | 0.06 | ± 0.01 | |
| Basicity | 65 | Maximum | |
| Phosphorus | 0.05 | Maximum | |
| Physical Properties | Value | Tolerance | |
| Bulk Density | 2.2 T/m3 | ± 0.2 | |
| Tumbler Index | 93 % | Minimum | |
| Abrasion Index | 3 % | Min ± 0.5 % | |
| Cold Crushing Strength (Avg) | 250 Kg/P | Minimum | |
| Size Analysis | |||
| 8 - 16 mm | 94 % | Minimum | |
| -5 mm | 2 % | Maximum | |
| +16 mm | 4 % | Maximum | |
| Metallurgical Properties | |||
| Porosity | 18 % | Minimum | |
| Reducibility | 62 % | Minimum | |
| We regularly import Mild Steel Skull from various countries. |
Subhasis Das (Delta Iron & Steel Company Pvt. Ltd.)
103, Steel Center, Ahmedabad Street, Masjid East,, Masjid Bunder, Mumbai, Maharashtra - 400013, India
Share us via
Write a Review
