Compact, space-saving, modular system series. Capacity: 3 to 100 kg precious metal within 8 hours Easy to expand due to modular design Including agitator motors, heating, condensers, solvent containers in SCHOTT glass, precipitation and filter units, reservoir Dissolving medium aqua regia ( HNO3 +HCL) The complete unit is located under an exhaust hood and in a drain tray Acids and solutions are not conveyed through pressing but by suction (vacuum)

The modular system can be expanded at any time. One cell for approx. 15 kg of fine silver consists of the following components: electrolyte tank 275 l in PP for up to 10 anodes each with 8 kg cathodes made from polished stainless steel filter cloths made from acid-resistant fibre Drive with scraper The system requires no special maintenance and can be operated continuously. The silver to be processed must be melted to anodes which are then hung in the anode holder. The purity of the silver should not be below 70%.

We supply you with all technical machines required for the equipping of your analytical laboratory. We cover the whole process chain with our high quality components. Your advantage: you have a competent partner for all your laboratory technology and can benefit from our reliable service.

• Sizes90X66X120cm,135X66X120cm
• Voltage230V/50Hz,230V/50Hz
• Power0.70kW,0.96kW
• ModelPUL 10,PUL 20

• FeaturesSealed armored heaters for the electrolyte (400 W power),Arranged for suction system, ASPIRATOR NOT INCLUDED etc.

This process is able to achieve uniform gold colours, of tanned brown tone, like Chocolate, even over a complex shaped items thanks its excellent throwing power. Another quality is the low production cost because the small degree of plating efficiency combined with a high covering effect. This bath contains 0, 6g of gold per liter. One unit bottle is to prepare on liter solution, not including gold. You should add gold salt, separately dissolved in hot deionized water.

• FeaturesLow investment,Higher resistance to oxidation,Save Up to 50% consumption due to thixotropic effect etc.

This system is a special morphology of the eletroplyte, a gel from. It gives great advantages in comparison to the classical "brushpen" plating. However it required more distinctive attentions.

Compact, space-saving, modular system series. Capacity: 3 to 100 kg precious metal within 8 hours Easy to expand due to modular design Including agitator motors, heating, condensers, solvent containers in SCHOTT glass, precipitation and filter units, reservoir Dissolving medium aqua regia ( HNO3 +HCL) The complete unit is located under an exhaust hood and in a drain tray Acids and solutions are not conveyed through pressing but by suction (vacuum)

The modular system can be expanded at any time. One cell for approx. 15 kg of fine silver consists of the following components: electrolyte tank 275 l in PP for up to 10 anodes each with 8 kg cathodes made from polished stainless steel filter cloths made from acid-resistant fibre Drive with scraper The system requires no special maintenance and can be operated continuously. The silver to be processed must be melted to anodes which are then hung in the anode holder. The purity of the silver should not be below 70%.

We supply you with all technical machines required for the equipping of your analytical laboratory. We cover the whole process chain with our high quality components. Your advantage: you have a competent partner for all your laboratory technology and can benefit from our reliable service.

• ModelPUL 10,PUL 20
• Sizes90X66X120cm,135X66X120cm
• Voltage230V/50Hz,230V/50Hz
• Power0.70kW,0.96kW

• FeaturesSealed armored heaters for the electrolyte (400 W power),Arranged for suction system, ASPIRATOR NOT INCLUDED etc.

This process is able to achieve uniform gold colours, of tanned brown tone, like Chocolate, even over a complex shaped items thanks its excellent throwing power. Another quality is the low production cost because the small degree of plating efficiency combined with a high covering effect. This bath contains 0, 6g of gold per liter. One unit bottle is to prepare on liter solution, not including gold. You should add gold salt, separately dissolved in hot deionized water.

• FeaturesLow investment,Higher resistance to oxidation,Save Up to 50% consumption due to thixotropic effect etc.

This system is a special morphology of the eletroplyte, a gel from. It gives great advantages in comparison to the classical "brushpen" plating. However it required more distinctive attentions.