Rate Indicator in Delhi

• MOQ : 4 Piece(s)
• k-factor range : 0.001 to 999999.999
• flow alarm output range : 0.1 to 99999.99.
• electrical connection : terminal blocks, #22 awg, 3 conductor 18' (5.5 m) cable (2000' max)
• input : 5 v pulse or contact closure; 1 to 15 pulses/s.
• power requirements : 7 to 30 vdc @ 4 ma (4 to 20 ma when loop-powered)
• product applications : water treatment water utilities industrial chemical handling
• Material : Die-cast Powder-coated Aluminum; Faceplate #HP92W Lexan
• Supply Type : Manufacturer
• mounting : see model chart on catalog page

Rate and Total Indicator series rti2 rate/total indicator loop powered, converts pulse frequency to 4 to 20 ma, high/low flow alarm the series rti2 rate & total indicator is an indicator/transmitter that takes the pulse output signal from compatible flowmeters, displays flow rate and total, and provides outpu more...

• Sensor Supply : +10V DC provided by instrument
• Totalised Reset : By Front panel touch switch

4 digit display for Flow Rate with resolution from 0.001 to 1 6 digit totaliser for integrated flow values with resolution setting from 1 to 0.001 Multiplier programmable with resolution ranging from 0.001 to 0.00001 Input frequency range from 10 pulsesmin to 50, 000 pulsesmin Totalized flow saved in memory o more...

• Packaging Type : 1
• Type : Rate And Total Indicator
• Material : Die-cast Powder-coated Aluminum; Faceplate #HP92W Lexan.
• Weight : 3 lb (1361 g). : Process Temperature -32 to 131 Degree F (0 to 55 Degree C)
• Storage Temperature : -40 to 158 Degree F (-40 to 75 Degree C). : K Factor Range : 0.001 to 999999.999
• Flow Alarm Output Range : 0.1 to 99999.99. : Enclosure Rating : NEMA 4X (IP67).
• Supply Type : Supplier
• Input Power : 5 V pulse or contact closure; 1 to 15 pulses/s. : Enclosure Rating:NEMA 4X (IP67).

rate and total indicator series rti2 rate/total indicator loop powered, converts pulse frequency to 4 to 20 ma, high/low flow alarm the series rti2 rate & total indicator is an indicator/transmitter that takes the pulse output signal from compatible flowmeters, displays flow rate and total, and provides outpu more...

Programmable Scale factor facilitates direct reading in engineering units (RPM, meters / minute etc. ), Accepts input directly from proximity switches, encoders and potential free contacts. Sensor supply to power the proximity & other sensors, Configuration lock to avoid inadvertent change in configured param more...