Details: With M.steel rod (Length 18") the rod diameter is 1 cm and solid black coated support stand base (6"x4"), this lab metalware set provides a stable and safe support to your lab work. Convenience - This chemistry stand with clamp eliminating the need to piece together a symore...
For Use With (Equipment) - Magnetic Stand Shipping Condition - Room Temperature Product Line - Ambion™ Quantity - 1 Each Type - Magnetic Stand  more...
Mini Magnetic Stand, Compact and universal permanent magnetic stand. High magnetic power for maximum rigidity. Includes disc on bottom for neutralizing magnet when not in use.more...
A handy, little, space saver, this circular twelve place polypropylene test tube stand has four 25 mm dia holes & eight 19 mm dia holes in its top plate. The base has matching hemispherical wells & 16 vetical pins for drying tubes surrounded by a trough to catch drippings. This amore...
These ingenious racks with a 3-tier design provide clear view of the tube contents & convenient insertion & removable of tubes. The PC rack has transparent upper & middle plates where as in PP racks, every part is colored & opaque. These autoclavable Racks can with stand sub-freemore...
This autoclavable Stand is perhaps the most commonly used Test Tube Stand in various laboratories. For better visibility, this 6-place rack is end supported by 2 columns. The top plate has 2 holes for holding 25mm dia test tubes, four holes to hold 16mm dia tubes where as the basmore...
Moulded in Polypropylene, this Flask Stand gives a stair like top view. Every step provides excellent support to the round bottom flask at every point of contact. This Flask Stand can hold round bottom Flasks up to 10 Ltr. capacity. This Stackable Flask Stand can also be steam aumore...
These non-corrosive, moulded Retort Stands provide excellent replacement for the metal ones. Even the metallic rod has a polypropylene covering making it non-corrosive. The rod measuring 12.5mm x 750mm can be screwed into the heavy base giving way to a perfectly stable Retort Stamore...
Moulded in Polypropylene, this flask stand gives a stair-like top view. Every step provides excellent support to the round bottom flask at every point of contact. This flask stand can hold round bottom flasks up to 10 Ltr. Capacity. This stackable flask stand can also be steam aumore...
We offer a good quality Thermometer Stand made from Sturdy Aluminum construction. Our Thermometer Stand has Stove enamel finish for better utility in various chemical applications. Our Thermometer Stand has a good capacity of holding 18 thermometers. The Thermometer Stand offeredmore...
We offer a wide range of Retort Stand made from optimum quality raw materials. Our Retort Stand has wide application in clinics, hospitals and research labs. Retort Stand IS having study base of C.I. level to mount of table, painted in black water proof synthetic enamel paint andmore...
We offer a wide variety of Test Tube Stand specially designed using good quality raw materials. Our Test Tube Stands are highly accurate, efficient and reliable for carrying out any chemical application. Our Test Tube Stand is manufactured with high quality of material, which avomore...
Our PP Clamp Stands are reckoned for their sturdy make and long service life. Purchasers can get in touch with us all year round for acquiring superior-grade PP Clamps and Stands at competitive prices. Fret not! Our payment procedures are completely transparent and you can rmore...
We make available 3 Tier Test Tube Stands in varying sizes. With exceptional transportation facilities, our diligent team delivers the product basket in the committed time span. We own a capacious and well structured warehousing unit wherein we store the entire lot away frommore...
We make available PP Test Tube Stands in varying sizes. Our team professionals ensure that smooth transactions are done and for that reason, we accept payments through letter of credit & money transfer. This makes us most reliable amidst the clients. Purchasers can get imore...
Our ESR Stands are reckoned for their make and quality. As we have a spacious warehouse, we are capable of meeting the urgent requirements of the clients. Moreover, we never go out of stock and thus we maintain year round availability. We are instrumental in offering the productsmore...
We make available Test Tube Stands which are acclaimed for their make and long service life. We make sure that the offered lot complies with the stated quality norms, thus check the product quality on several stages. We source direct as well as indirect raw materials only from thmore...
The base is available in three sizes, painted with 60 cm aluminium rod.Retort stand base rectangular, blue colour painted, dipressed base with aluminium. Also available in Polypropylene. Â more...
 Moulded in Polypropylene, this Flask Stand gives a stair-like top view. Every step provides excellent suppport to the round bottom flask at every point of contact, This Flask stand can hold round bottom FLasks up to 10 Ltr capacity. This stackable flask stand can also be stermmore...
A retort stand, sometimes called a ring stand, [1] is a piece of scientific equipment, to which clamps can be attached to hold test tubes and other equipment such as burettes which are most often used in titration experiments. more...
Burette Stands  (1139)  Made of hardwood, polished, with plastic clamping screws. Rods 460 x16 mm approx. a. Base 200 x 110mm for Single Burette b. Base 290 x 110mm for Two Burettes more...
Prod. No. 50 Compact and universal permanent magnetic stand High magnetic power for maximum rigidity Includes disc on bottom for neutralizing magnet when not in use more...
We are instrumental in providing our clients a comprehensive range of Retort Stand. These are manufactured using quality tested raw material in obedience to the prevailing market trends. In addition, the offered stand goes through a series of tests for ensuring its faultlessnessmore...
This test stand is mainly used for testing air filters, that are used in internal combustion engines and compressors for their efficiency according to ISO 5011 standard. The test stand is automatically controlled by the computer and consists of a test channel and other pipes mademore...
The multi pass test stand is mainly used for testing the performance of hydraulic filters according to ISO 19438, ISO 4548-12 and ISO 16889 standards. These standards describe a method for determining the contaminant capacity, particle removal and differential pressure characterimore...
The test stand is mainly used for testing the performance of hydraulic filters and filter elements according to the ISO 4548-1. The scope of the testing is to measure the differential pressure across the filter housing or filter element as a function of the volumetric flow rate amore...
Owing to our wide distribution network and speedy delivery services, buyers can receive their orders on timely basis. For those seeking to buy superior-grade Retort Stand, we are the best suppliers of it in the market. more...
These non-corrosive, moulded retort stand provided excellent replacement for the metal ones. Even the metallic rod has a polypropylene covering it non-corrosive. The rod measuring 12.5mm x 750mm can be screwed into the heavy base giving way to a perfectly stable retort stand. matmore...
We are offering round test tube stand. a handy, little, space saver, this circular twelve place polypropylene test tube stand has four 25mm dia holes & eight 19mm dia holes in its top plate. The base has matching hemispherical wells & 16 vertical pins for drying tubes surrounded more...
This autoclavable stand is perhaps the most commonly used test tube stand in various laboratories. For better visibility, this 6-place rack is end supported by 2 columns. The top plate has 2 hole for holding 25mm dia test tubes, four holes to hold 16mm dia tubes where as the basemore...
Retort stand is used to attach clamp that holds test tubes and other equipment like burettes. It is used for titration, distillation and filtering of samples. It is available in both central and side holes. Base of the stand is PP and the rod is coated in PE. more...