Jalandhar, Punjab, India
Our Products
Leading Manufacturer, Supplier & Retailer of LEATHER CARPENTER NAIL TOOL BAG, LEATHER NAIL TOOL BAG, CHAFF CUTTER HORIZONTAL STAND, CHAFF CUTTER BLOWER and CHAFF CUTTER BLOWER UPWARD DOWNWARD.
Drop forged from CARBON STEEL
Hardened and tempered
Epoxy powder coated
|
|---|
1 Large Pocket
" 1 Medium Sized Flared Pocket & Two Belt Level Stitched Pockets
" 6 SmallPencil Pockets
" 2 Leather Hammer Loops
" Double Stitched & Rivet Reinforced
" Wide Belt Tunnel Slot
Heavy Duty Leather
" Rivet Reinforced For Added Strength
" Thick Inner Felt For Comfort
" Adjustable Nylon Strap With Plastic Buckle
Revolving Hammer Holder
Leather With Movable Chrome Plated Buckle & Riveted
1 Large Pocket, 1 Medium Sized Nail Pockets
" 2 Small Side Pockets
" 1 Leather Hammer Loop
" One Metal Movable Hammer Holder
" Wide Belt Tunnel Slot
Leather With Fix Chrome Plated Buckle & Riveted
Leather Tape Holder
Leather Tape Holder With Safety Strap
" Wide Belt Slot
Canvas Tool Bag In 18", 24", 30" & 30" With Rope Handle
" Heavy Duty Canvas
" Nylon Zip With Runner
" Cotton Niwar Handle
| Polypropylene webbing ." Quick release buckle." Available in all sizes |
|
|
| Specification Of Product | |
| 2 Roller Minni Motor Railing Frame Chaff Cutter Product Details : 1. This chaff cutter is available in two model :a. 2 feeding rollers, 8* cutting mouth.b. 3 feeding rollers 9* cutting mouth. 2. Wheel Available with this model : a. Single V-Belt Type (Dia 32* ; Weight :20 Kgs Approx)b. Wheel with both V-belt and Flat Belt provision (Dia 32*).c. Only flat belt wheel (Available from 18 kgs to 30 kgs weight). 3. 3 blade wheel is available (it reduces the length of fodder by 30%). 4. Both models are available on 60X3 or 60X4 angle frame and legs as per requirement. 5. Double z (steel Sealed) bearing are installed in these models. 6. Cutting mouth is grinded machine for sharp edge and easy cutting. 7. Approx. Weight of this model 2R8* is 85 kgs. 8. Approx. Weight of this model 3R9* is 115 kgs. 9. These models are avialable with complete fitting nut bolts and steel wrench. Note :All accessories i.e. Parnala, Blade, Safety Grill, Handle, V-Belt, Motor Pulley etc are not included in weight and these accessories will be charged extra as per customer requirement |
Chaff Cutter New Model with Blower Type are meant for cutting all kinds if dry & green fodder into small pieces for cattle. These are so designed with a view to totally eliminate the wastage of fodder. The chopped fodder also becomes more digestible and makes it easier for animals to swallow. These chaff cutters can chop the green or dry fodder of Bajra, Jawar, Corn, Barseem, Sugarcane, Paddy, Grass, Groundnut etc.
Capacity = 200 - 300 Kg/Hr (Subjected to vary for different kinds of raw materials)
Electric Motor = 2 HP
Capacity = 300 - 400 Kg/Hr (Subjected to vary for different kinds of raw materials)
Electric Motor = 3 HP
Tractor PTO Operated Steel Gear Chaff Cutter Extra Heavy Duty. Itis an extra heavy chaff cutter which operates on a tractor from P.T.O shaft and designed to prepare fodder for ensilage and conveys it to a silo tower or a trench. It can also be used to prepare forage which is directly used for cattle feeding. It has a super strong frame, fitted with highly powerful blower. It is provided with conveyor chain for convenient feeding. The machine can also be used for wood chipping.
Polished Head Securely Fixed To Tubular Steel Handle With Plastic T Hand Grip
A With 36" Handle With Plastic 'T' Grip
Packaging : 10 Pc Per Package
B Without Handle
Packaging : 36 Pc Per Package
With 48" Long Handle With Pvc Grip
Packaging : 10 Pc. Per Package
Without Handle
Packaging : 36 Pc. Per Package
Made From Carbon Steel
Points Are Hardened And Ground
Designed For Taking Transfer Measurements
DividerInside Caliper
|
SIZE |
PCS/CARTON |
|
|
INCH |
MM |
|
|
4 |
100 |
400 |
|
6 |
150 |
200 |
|
8 |
200 |
200 |
|
10 |
250 |
120 |
|
12 |
300 |
120 |
|
14 |
350 |
60 |
|
16 |
400 |
40 |
|
18 |
450 |
40 |
|
24 |
600 |
40 |
Made From Steel body
Useful to make drill in wood or wall
|
SIZE |
PCS/CARTON |
|
|
INCH |
MM |
|
|
10 |
250 |
100 |
|
12 |
300 |
100 |
Expert Quality Woodworking Plane Manufactured From Selected Brass Having
Hardwood Surface
Comes With High Carbon Steel Hardened & Tempered Blade
|
||||||||
|---|---|---|---|---|---|---|---|---|
| Ideal For Hobbyist And All Small Scale Woodworking And Model Making ProjectsConsists Of Four Different Wood Working ToolsMarking Gauge 4" (100mm) Adjustable Bevel 3-3/4" (95mm) Brass Plane 3"(75mm)Set Comes In A Finished Wooden Box |
Oval Section Tubular Frame Ensures Perfect Balance And Rigidity Grip
With 300mm Blade
|
||||||||
|---|---|---|---|---|---|---|---|---|
Straight
Cross Cut
Strong Steel Frame Ensures Perfect Rigidity And Balance
Wooden Handle For Comfortable Grip
With 300mm Blade
Chrome Plated
Epoxy Powder Coated
Made From 6mm Dia Steel Wire
Used For Small And Tricky Saw Jobs
With 150mm Blade
|
||||||||
|---|---|---|---|---|---|---|---|---|
Bar Manufactured From Special 'T' Bar Section Steel
Head & Slide Made Of Cast Iron
Suitable For Heavy Duty Work
|
SIZE |
PCS/CARTON |
|
|
FT |
MM |
|
| 2 | 600 | 10 |
| 2.1/2 | 750 | 10 |
| 3 | 900 | 10 |
| 3.1/2 | 1050 | 8 |
| 4 | 1200 | 8 |
| 4.1/2 | 1350 | 6 |
| 5 | 1500 | 6 |
| 5.1/2 | 1650 | 6 |
| 6 | 1800 | 6 |
| 6.1/2 | 1950 | 4 |
| 7 | 2100 | 4 |
| 8 | 2400 | 4 |
Cast-Iron Head And Slides, High Quality Steel Bar, Handle, Screw & Pin
Primarily Designed For The Clamping Of Large Section Work Piece During Joint-
Gluing, But Can Also Be Used For General, Large Scale Clamping Applications
|
SIZE |
PCS/CARTON |
|
|
FT |
MM |
|
| 2 | 600 | 10 |
| 2 ½ | 750 | 10 |
| 3 | 900 | 10 |
| 3 ½ | 1050 | 8 |
| 4 | 1200 | 8 |
| 4 ½ | 1350 | 6 |
| 5 | 1500 | 6 |
| 5 ½ | 1650 | 6 |
| 6 | 1800 | 6 |
| 6 ½ | 1950 | 4 |
| 7 | 2100 | 4 |
| 8 | 2400 | 4 |
Made From Fine Grey Iron Castings
Fully Hardened Cutting Blade
Fitted With Chemically Tested And Seasoned Wood Handle And Knob
|
SIZE |
BLADE IN |
PCS/CARTON |
||
|
INCH |
MM |
NO |
||
|
8 |
200 |
3 |
1.3/4 |
15 |
|
9 |
225 |
4 |
2 |
15 |
|
14 |
350 |
5 |
2 |
10 |
|
18 |
450 |
6 |
2.1/4 |
8 |
|
22 |
550 |
7 |
2.1/4 |
8 |
Made From Fine Grey Iron Castings
Fully Hardened Cutting Blade
Fitted With Plastic Handle And Knob
|
|||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Fully Hardened Alloy Steel Cutting Blade |
|
SIZE |
PCS/CARTON |
|
|
INCH |
MM |
|
|
1 ¾ |
45 |
240 |
|
2 |
50 |
200 |
|
2 ¼ |
57 |
160 |
Made From Fine Grey Iron Castings
Fully Hardened Carbon Steel Cutting Blade
|
MM |
NO |
PCS/CARTON |
|
140 |
102 |
60 |
|
175 |
110 |
30 |
Body Made From Malleable Iron With Hardened Cutting Blade
Fully Adjustable For Depth Of Cut Twin Thumb Screw
Suitable For Work On Any Convex Or Concave Surface
|
|---|
Frame Made From Malleable Iron
High Quality Steel Screw With Drop Handle
Stone Enameled Finish Frame Prevent Rust
|
||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Hand Operated Grease Gun Only
Zinc Plate Steel Connections With Positive CrimpingExcellent
| Metal Body Oil Can With Steel PumpAvailable With Fixed/Flexible Spout |
Metal Body Oil Can With Steel Pump
Available With Fixed/Flexible Spout
Also Available With Base
|
PINT |
CC |
PCS/CARTON |
|
4OZ |
125 |
100 |
|
6OZ |
180 |
100 |
Drop forged legs and beam from carbon steel
Hardened and tempered
Used for removal of Gears, Bearing, Pulleys etc
Supplied as individual item with a number set option
|
SIZE |
PCS/CARTON |
|
|
INCH |
MM |
|
|
3 |
75 |
40 |
|
4 |
100 |
40 |
|
6 |
150 |
24 |
|
8 |
200 |
16 |
|
10 |
250 |
12 |
|
12 |
300 |
8 |
Carbon steel
Chrome plated
Hardened and tempered
|
SIZE |
PCS/CARTON |
|
|
MM |
INCH |
|
|
12 |
300 |
50 |
|
14 |
350 |
50 |
|
16 |
400 |
40 |
|
18 |
450 |
30 |
|
20 |
500 |
30 |
|
21 |
525 |
30 |
|
24 |
600 |
24 |
|
30 |
750 |
20 |
|
36 |
900 |
20 |
Frame made from malleable iron
High quality steel screw with drop handle
Suitable for all types of metal working
Stone enamelled finish frame prevent rust
|
SIZE |
PCS/CARTON |
|
|
INCH |
MM |
|
|
2 |
50 |
80 |
|
3 |
75 |
40 |
|
4 |
100 |
30 |
|
6 |
150 |
20 |
|
8 |
200 |
15 |
|
10 |
250 |
10 |
|
12 |
300 |
8 |
1/2", 3/4", 1" Square Drive
Carbon Steel , Chrome Plated
|
SIZE |
SIZE |
SIZE |
PCS/ |
|
3" |
5" |
6" |
100 |
|
5" |
8.1/2" |
8" |
100 |
|
10" |
17" |
16" |
100 |
Body Made From Tested Steel
Hardened And Knurled Replaceable Carbon Steel Jaws
Chrome Plated Locking Screws
|
SIZE |
PCS/CARTON |
||
|
INCH |
NO |
MM |
|
|
2.5 |
0 |
62 |
16 |
|
3 |
1 |
75 |
12 |
|
3.5 |
2 |
88 |
8 |
|
4 |
3 |
100 |
6 |
|
4.5 |
4 |
112 |
4 |
|
5 |
5 |
125 |
3 |
|
6 |
6 |
150 |
2 |
|
8 |
8 |
200 |
1 |
|
10 |
10 |
250 |
1 |
|
12 |
12 |
300 |
1 |
Body Made From Tested Steel
Hardened And Knurled Replaceable Carbon Steel Jaws
Chrome Plated Locking Screws
|
SIZE |
PCS/CARTON |
|
|
INCH |
MM |
|
|
1.1/2 |
35 |
16 |
|
2 |
50 |
16 |
|
3 |
75 |
8 |
|
4 |
100 |
8 |
Frame Made Out Of Malleable Iron
Hardened Carbon Steel Jaws
Base Is Provided With Three Holes For Fastening To A Bench
Self Locking Frame With All Cast Components
Powder Painted For Longer Life
|
SIZE |
PCS/CARTON |
|
|
INCH |
MM |
|
|
1.1/2 |
37 |
12 |
|
2 |
50 |
8 |
|
2.1/2 |
63 |
6 |
|
3 |
75 |
4 |
|
4 |
100 |
2 |
| Jaws Drop Forged From Carbon SteelJaws Hardened And TemperedHandle Malleable IronEpoxy Powder Coated |
We are the main supplier of this product.
|
SIZE |
SIZE |
PCS/CARTON |
|
6 |
150 |
120 |
|
7 |
175 |
100 |
|
8 |
200 |
80 |
|
10 |
250 |
60 |
Drop Forged From Carbon Steel
Induction Hardened And Tempered
Finely Sharpened For Cutting Action
|
SIZE |
SIZE |
PCS/CARTON |
|
8 |
200 |
100 |
|
9 |
225 |
80 |
|
10 |
250 |
60 |
Polished Head
Drop ForgedFrom Carbon Steel
Hardened And Tempered
Multi Function With Hammer Head
|
SIZE |
SIZE |
PCS/CARTON |
|
10 |
250 |
30 |
Accurate Tool for Layout Work
Polished Wood Stock with Forged Brass Wing Nut and Tips
Blackened Steel Blade
