Deep Engineering Co. Ahmedabad, Gujarat

The aptitude of pump to run dry eliminates single reason of interruption which is regularly attributable to the human component this feature is very convenient in process needing continuous transference of a corrosive fluid with a high gradation of reliability e.g. Disposal of acid effluent.No maintenance since the pump can even run dry indefinitely as there is no packing, bushes or internal Bearings.Polypropylene are manufactured by solid injection molding process with high pressure hence.

Vertically split suction. intermediate and discharge casings clamped together by external tie bolt and sealed with gaskets or 'O' ring as required by the design, pumping temperature of the liquid pumped and the construction of the pump, Pump uses soft graphite lubricated asbestos. The shaft is fitted with renewable shaft sleeve in the region of the stuffing box, which protects the shaft from wear due to packing. Special water-jacketed stuffing boxes, and special design of stuffing boxes with mechanical seals are available, The discharge nozzle is top vertical. Suction nozzle horizontal located on the right hand side, left hand side or central position when viewed from the driving end Is available.

Phosporic acid plants, Gas washing plants, Rayon plants, caustic joda plants for corrosive acids & basics, effluent treatment handling.Due to constant R & D activity, details are subject to change without prior notice.

SELF PRIMING MUDDY WATER PUMP
MODEL	HP	RPM	PUMP SIZE	TOTAL HEAD IN MTRS / DISCHARGE IN LPM
				6	8	12	15	18	19	20	22	24	26	28	30	34
SP-0	1.00	2850	40X40	312	270	204	66
SP-1	2.00	2850	40X40			336	264	162	108	48
SP-2	3.00	2850	50X50			480	276	378	354	312	234	150
SP-3A	5.00	2850	80X80	1182	1152	1068	972	858	822	762	660	552	426
SP-3	7.50	2850	80X80							912	894	858	798	708	594	300
SP-3L	5.00	1450	80X80							588	540	486	420	360	306
SP-4LA	10.0	1450	100X100			2040		1560		1320
SP-4L	12.5	1450	100X100			2400		1740		1680		1560	960

Operation Advantages Of Glandless Pump:

• The recognizable leading improvement is the deletion of problems get to your feet from the use of powered seal, insulation box and inside bearing.
• The aptitude of pump to run dry eliminates single reason of interruption which is regularly attributable to the human component this feature is very convenient in process needing continuous transference of a corrosive fluid with a high gradation of reliability e.g. Disposal of acid effluent.
• The glandless pumps lend itself to process incorporating automatic control of a pump discharge valve. The "controlled leakage" acts as an integral by-pass. The pump suffers no ill effects if the discharge valve is partially or fully closed.
• The maximum main improvements to be derivative from the use of glandless pump are in the province of maintenance and following reduction in down time invention victims. Normal maintenance on the glandless pump is confined to lubrication of the driving.

• Salient Feature Of Vertical Glandless Pump:

  • No mechanical seal, stuffing box and internal bearings provided. .
  • No maintenance since the pump can even run dry indefinitely as there is no packing, bushes or internal Bearings.
  • Reduction of downtime production losses in view of above features.
  • All the wet-end parts are in solid molded construction to with stand corrosion and erosion.
  • The impeller is semi-open type used in our all-vertical pumps to suit both clear and polluted fluid
  • Pump mounted outside the suction tank and is not submerged type.
  • Polypropylene are manufactured by solid injection molding process with high pressure hence.

  • Temperature Resistance:

    • PP 50 TO 80 C
    • PPH 90 TO 100 C.
    • PVDF 100 TO 115C

About Magnetic Pump:

• Magnetic drive design eliminates the conventional method of shaft coupling. Hence the pump casing is fully sealed from drive end which gives away the use of conventional sealing system . There is no seal used and hence no troublesome seal repairing and replacement , leakage and production lost. Impeller and drive magnets are permanent rare earth magnets. They prevent slippage and ensure that full motor horsepower is converted into pumping power.
• All pumps are Centrifugal Semi-Open Impeller Type pumps and need priming before start up.
• All Pumps are rated for continuous duty with class "E" Insulation.
• SS-316 Magnetic pumps are available upto 5 HP

• Range:

  • Capacity :from 10 LPM upto 750 LPM.
  • Head :upto 40 mtrs.
  • Material of Construction :Poly Propylene Glass Filled , PVDF upto 110 Deg C & SS-316
  • Operating Temp :PP upto 80 deg C , PVDF upto 110 deg CSpecial Pumps for high temperature upto 150C and 250C for SS-316

  • Applications & User Industries :

    Ideal for transfer of corrosive chemicals , plating chemicals , acids , dyes , solvents , toxic & fuming liquids , petrol , kerosene etc. Useful in chemical industries , pharmaceuticals and food processing industries. Electroplating , Galvanizing / Anodizing plants . Laboratory equipments and PCB palnts . Medical equipments and X-Ray film plants. Textile Dyeing houses . Liquid dispencing machines and Chemical Filtration equipments. For hazardous duty conditions with flame proof motors.High Efficiency due to permanent magnet power coupling.

  • Advantageous Features :

    100% Leak Proof pumps due to magnetic drive arrangement. No shaft seal used which automatically solves problems of seal leakage and wear & tear. Friction free operation for reduced power consumption. High power permanent magnets ensure full power transfer and eliminates slippage. All pumping parts are Non-metallic, Which gives superior corrosion resistance, Simple and easy to operate and maintain. Long life , reliable and trouble free operation.

Features:

Seal lessGland lessNon magnetic driven Working principle: we have made shaft and stuffing box long and provide special arrangement in stuffing box with groove on shaft in such a way that liquid which come out from stuffing box will go back again to casing . Some liquid is may be come out but due to deep stuffing box it will remain in stuffing box and we have provide one hole in box which is connected to suction flange of pump by pipe line so liquid will again move to suction line and thus pump do not have any leakage from shaft . This pump is very ideal for solvents , acids and corrosives liquids where maintenance of mechanical seal is costly and also time consuming . Our complete CF series pumps will be soon available with above features and after some time we also give PP pumps with same features.

Applications :

"KLSSIC" Volute casing IN-LINE centrifugal pumps Type MIL are space saving pump units designed for easy installation and are used generally for circulating clean non-aggressive fluids.

• Vertical multistage centrifugal pumps type MC are designed for a wide range of applications.
• Water Supply Systems
• Water circulation / Transfer
• Hot water Circulation
• Agriculture
• Industry
• Ship Building
• And many other Applications
• Cooling Towers

RANGE:-

Capacity :up to 280 m3/hr
Head :up to 95 mtr Higher capacity and head available on request

Motor Option :

Standard pumps are fitted with motor adaptor suitable for mounting Vertical Flange Mounting V-1 frame Motor, to suite particular specification where protection class & enclosure are required . Special suitable adaptor can be provided.The pumps is coupled with a Electric motor , which is totally enclosed , fan cooled Squirrel cage motor. Single-phase Motors have a built in thermal overload protection.Three phase motors should be protected by a suitable motor starter as per local regulations.
Nominal Speed :-2900/1450 rpm

Features:

• Vertically split suction. intermediate and discharge casings clamped together by external tie bolt and sealed with gaskets or 'O' ring as required by the design, pumping temperature of the liquid pumped and the construction of the pump
• Grease lubricated Antifriction Bearings designed to meet the requirements mounted on either side
• Pump uses soft graphite lubricated asbestos. The shaft is fitted with renewable shaft sleeve in the region of the stuffing box, which protects the shaft from wear due to packing. Special water-jacketed stuffing boxes, and special design of stuffing boxes with mechanical seals are available
• The discharge nozzle is top vertical. Suction nozzle horizontal located on the right hand side, left hand side or central position when viewed from the driving end Is available. The flanges are round corresponding to international standards
• The direction of rotation is clockwise as viewed from the driving end

• Applications and Industries:

  • Irrigation - Sprinkler Installations
  • Pressure Boosting - Multistage story Building - Hydro - Pneumatic
  • Water Works Fire Fighting - Mining wash down Applications
  • Hydraulic press / Circuits transfer & circulation hot & cold water
  • Boiler feed pumps - Condensate pumps

AC LPG Pump Techanical Secification:

• Pump Type :AC (Electric supply) LPG Diaphragm Pump
• Pump Make :Klassic
• Pump Model :MD-AC-1
• Suction x Delivery Sizes :- " x "
• Pump Capacity :15 kg/7 Minute I.E 2.14 kg/Minute
• Maximum Pressure :22 kg/cm2
• Pump Weight :16 kg approx

AC Motor Specifications:

0.5 hp x 1450 rpm , Non Flame Proof MotorTotally enclosed Fan cooled Squirrel cage Induction Motors Horizontal Foot mounted B3 Construction, Continuously rated S1 Duty suitable for single phase , 220 volts , 50 Hz , AC Supply(110 volts or 60 Hz Available on request)with ambient 45c & class "F" Insulation.

Special Executions:

• Specially coated internals for pumping of non -lubricating liquids.
• Engineering plastics rotor set for chemicals & low viscosity fluids
• Specially designed pumps for vacuum duty applications
• Uni-directional.

Advantages of SIG Pumps:

• Single shaft - well supported at both ends
• High volumetric and overall efficiencys
• Ease of assembling and dismantling without disturbing the pipeline.
• Choice of oil seal / Mechanical seal / gland pack.Parts / Pumps interchangeable with well known brands
• High suction lift and low noise level as well as vibrations
• Compact and light - weight design
• Continuous, pulsation free flow due to axial entry in pumping element

• Typical Applications:

  • Transfer from tank to tank
  • Emptying of barrels
  • Ease of assembling and dismantling without disturbing the pipeline.
  • Lubricating and cooling of bearings , gears, mechanical seals and machine tools
  • Fuel oil booster

  Liquids Handled:

  • Neutral liquids with lubricating properties
  • Lube Oil
  • Fuel oil

AC LPG Pump Techanical Secification:

• Pump Type :Rotary Vane Pump
• Pump Make :Klassic
• Pump Model :RV-1
• Suction x Delivery Sizes :" x "BSP
• Pump Capacity :7 kg/minute
• Maximum Pressure :15 kg/cm2
• Pump Weight :5 kg approx (with out motor)

Required Motor Specifications:

1 hp x 2900 rpm, Non Flame Proof Motor Totally enclosed Fan cooled Squirrel cage Induction Motors Horizontal Foot mounted B3 Construction, Continuously rated S1 Duty suitable for single phase , 220 volts , 50 Hz , AC Supply(110 volts or 60 Hz Available on request)with ambient 45c & class "F" Insulation.

Material Of Construction:

Standard Cast Iorn Construction With Bronze Vane

Standard Accessories:

Overflow Control Valve Pump Stand Motor-Pump Pulley Pipe T Piston Ring Set Nozzle Set Pipe Nipple Pipe Bend

Applications:

• Agriculture / Industrial purpose
• Auto Two & Four Wheel Workshop
• Mineral Water & Soda Water Plants
• Boiler & Steam Engines
• State Transport & Workshop
• Railway Workshop & Cleaning Yards/ Air Port & Ship Yards

Benefits:

• Minimum Maintenance
• Very Easy to Operate
• Energy & Water Save

eatures:

• As all pumps are made from rolled stainless steel, mechanical properties are far superior then cast material.
• Pore free, non-pitting and non-adhering smoother surface, so less friction losses, and less crevice corrosion.
• Super finish surface also ensure no ingress or emission of germs or impurities
• Pumps are highly energy efficient and requires less NPSH to function without cavitation
• Pump can handle liquids having viscosities up to 1500 centipoise
• The pumps can work under a vacuum of 720 mm of Hg, suitable for vacuum evaporators.
• Pumps are available with closed/semiopen impellers.
• The best elastomers are used in the pumps to provide optimum resistance for high temperatures and chemicals.
• Minimum working / rotating parts
• Safe and quite operation levels.
• Gentle product handling with lower maintenance and downline cost.
• Dynamically combinations of seal faces as per customer's requirement (single seal / double seal, seal external cooling)
• Suitable for standard motor or flange type or foot cam flange type motor or engine
• Monobloc or bare pumps or with trolley
• Also with flame proof motors
• Various types of connection like - tri'clove joints SMS, Flanges or threaded nipple/coupling

ZYB-50/ ZYB-80V an epump built in air separator, by pass valve, filteris with threed if ferent top covers for different connecting pipes.A type, B type and C type.With the advantage of low noise, high flowrate, long life services etc.

Features:

• Can withstand wide voltage fluctuation - from 300-440 volts.
• Suction lift up to 7.5 meters.
• Top flat efficiency curve : minimum variation in efficiency in entire operating range
• Efficiency at par with internationally available pumps - higher up to 10 points than minimum required by Indian standards specification
• Models are with IP - 44 protection. Models with IP - 55 protection are also available on request
• Inside and outside of pump covered by anticorrosive paint
• Continuous rated motor
• Designed for automatic air release during priming
• Replaceable wearing parts and hence longer life
• Dynamically balanced rotating parts ensure minimum vibrations
• Designed to prevent overloading and motor burning
• Class of insulation 'B' ( 'F' Class for 9.3 kw and 11.0 Kw ratings).

• Applications:

  • Industries for clear water handling .
  • Water supply for domestic use in apartments, Buildings and hotels.
  • MMP Series Three Phase Pumps : Single stage, High speed horizontal, Centrifugal , Monobloc with volute type delivery casing

  Range:

  • Head :6-52 meters
  • Capacity :19.0-2.0 liters per second
  • Power rating :0.37 Kw to 5.5 Kw (0.5 HP to 7.5 HP )

  Material Of Construction Standard Supply:

  • Impeller:Cast iron
  • Delivery casing :Cast iron
  • Motor body :Cast iron
  • Shaft :EN -8
  • Shaft Sleeve :SS-410

  • Optional Supply:

    • Impeller:Bronze / Stainless Steel
    • Shaft :Stainless steel
    • Shaft Sleeve :Chrome Steel

The aptitude of pump to run dry eliminates single reason of interruption which is regularly attributable to the human component this feature is very convenient in process needing continuous transference of a corrosive fluid with a high gradation of reliability e.g. Disposal of acid effluent.the maximum main improvements to be derivative from the use of glandless pump are in the province of maintenance and following reduction in down time invention victims. Normal maintenance on the glandless pump is confined to lubrication of the driving.reduction of downtime production losses in view of above features.