GST : 03AUJPM4063C1Z0
Verified
Add Review
Our Products
Our offered Product range includes Cap Nuts, Coupling Nuts, Hex Nuts, Hex Slotted Nuts/Castle Nuts and Heavy Hex Nuts.
DIC Fasteners is a Manufacturer of Cap Nuts, typically used as a decorative finish to cover up with studs or threaded bolts that are sticking out. These nuts prevent stripping of screws and bolts on engines, machinery and wood frames so that it can be easily removed and reused. If an application requires a smooth finish or exposed threads to be covered, Cap nuts are perfect solution for this, comes in number of number of styles and dimensions including low crown and acron nuts.
Acorn Nuts have a dome shaped end at the top. The nuts can come either completely closed or with an open end cap depending on the application. Size range of acorn nut start at 4-40 and go up to 1-8 thread size.Cap Nuts helps in maintaining better insulation for different uses, like buildings, airplanes cars and boats. DIC Fasteners carries acorn nuts in brass, plastic, steel with a nickel plate, 18-8 stainless steel, steel black oxide, plain steel and black zinc.We can provide acorn nuts with a washer base for both open and closed acorn Cap Nuts.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : FASTENERS PACKING
1. Bulk packing 25 kg in a carton or bag
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet
3. As customers' requirement
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Coupling Nuts, hex shaped nuts that are usually used to join the external threaded fasteners together. The outer side of fastener is usually hex so a wrench can hold it. DIC Fasteners carries Coupling Nuts in many different sizes and materials. We offer wide range of stainless steel coupling nuts in a range of sizes and dimensions. As coupling nuts helps in extending the threaded rod and so they are named as extension nuts. Most common types of coupling nuts include hex coupling and round coupling. Coupling nuts are produced in all material categories and astm specifications in both inch and metric thread profile.Besides standard coupling nuts, we also offer sleeve nuts and coupling nuts with a sight hole so as to make sure that the nut is properly installed. From off the shelf standard sizes to special lengths, we can supply the coupling nut as per your requirement.If you are looking for a reliable supplier of coupling nuts, DIC Fasteners is ready to serve your all kinds of needs.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet
3. As customers' requirement
Port
NEW DELHI
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Hex Nuts, general purpose nuts used for industrial, petrochemical and commercial purpose. Hex nuts are one of the widely used fasteners for petrochemical applications, made from stainless steel, metric and inch sizes and a variety of standard finishes including plain, zinc yellow and zinc.DIC Fasteners offers a wide range of hex nuts dimensions to suit the different use of hex nuts of our customers in both inch and metric thread profiles. Our products are made from facilities equipped with the state of art technology and modern machinery to make sure that these products are of high quality and durability.If you are looking for a reliable supplier for hex nuts, DIC is ready to serve your all kinds of needs.
OUR HEX NUT TYPES INCLUDES:Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet
3. As customers' requirement
Port
NEW DELHI
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Hex Slotted Nuts, also referred to as Slotted Nuts or castellated nuts, are used to secure a safety wire or cotter pin to fastener with a drilled hole. The nuts have slot on the top generally used with a cotter pin to secure the fastener, make it possible to insert a split pin and secure the nut in place. Hex Slotted Nuts are used where longer engagement length is needed.All of our Hex Slotted nuts are made with high quality raw material, providing complete satisfaction to our customers.Our Slotted nuts start at a 1/4" and go up to a 2 thread size. We carry hex slotted nuts in plain steel, steel zinc, and in a heavy pattern. We have the capability to supply hex slotted nuts in various materials such as brass, silicon bronze depending on application.If you are looking for a reliable supplier of hex slotted nuts, DIC is ready to serve your all kinds of needs. We have hex slotted nuts in custom as well as non-custom sizes.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet
3. As customers' requirement
Port
NEW DELHI
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Heavy Hex Nuts, slightly wider and thicker than the standard hex nut pair with large diameter and high strength bolts. Various types of coatings are provided on Heavy hex Nuts Include zinc, zinc yellow and hot dipped galvanized for better performance. Heavy Hex Nuts provides a greater length of thread engagement and better resistance to stretching or widening. These are often referred to as hexagon heavy nuts or large hex nuts.We provide heavy hex nuts in both metric and imperial sizes with unified national coarse pitch, fine pitch, and ISO metric thread profile.DIC Fasteners is pioneer in offering various heavy hex nuts sizes that meet the desired and necessary heavy hex nuts standards. We assure you that all our products are in compliance with the industry standards. All types of custom, as well as non- custom sizes, are available with us.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet
3. As customers' requirement
Port
NEW DELHI
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Lock Nuts, primarily used for when you need a nut to resist loosening when vibration or torque is present. Lock nuts are primarily made from stainless steel and other finishes. The nuts do not easily loosen when placed on bolts, making them useful for holding wheel into axles or in automotive engines where machine vibration would otherwise loosen the fastener. Lock nuts are available in wide styles, grades, and finishes.The most common lock nut styles are Anco and Tri-lok nuts. The anco-style lock nut is a self-locking nut with a ratchet pin made from stainless steel whereas the Tri-lok style is a prevailing-torque locknut that is frictionally resistant to rotation due to the thread wrap on the top thread of the nut.Lock nuts with an integrated locking mechanism minimize the cost of the shaft as no key is required. Installation is also easier because no locking device is required. We carry lock nuts in many styles and plating as per the requirements.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet
3. As customers' requirement
Port
NEW DELHI
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Square Nuts in India, designed for use with a square head bolt and flat washer. These nuts provide great surface contact with the part being fastened compared to standard hex nut. Square nut works well in tight spaces when using pliers or a wrench and are less likely to become rounded off after repeated loosening.The square head design of the square nut has a sharp corner that can sometimes be harmful for wood or metal surrounding the nut.We supply wide range of square nuts dimensions to suit the different use of square nuts to our clients in materials such as Alloy Steel, Brass and Carbon Steel at our facilities that are equipped with the state of the art technology and modern machinery to make sure that these products are of the highest quality and durability.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union
Packaging Details : 1. Bulk packing 25 kg in a carton or bag;
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet;
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fastener is a Manufacturer of Weld Nuts, a special type of nut specifically designed to be welded to another object. The nuts are closely fixed to the target material and can be circular, square or hexagonal. One advantage of weld nut is that it can be used in restricted or limited space areas after installation. Its thicker design makes it suitable for heavy-duty applications. We have a wide variety of weld nuts in many different styles and sizes. These nuts form the strongest bonds when compared to mechanically clinched fasteners. However, these are not plated for corrosion protection due to the necessary welding process.Our weld nuts are made under strict supervision of professionals in accordance with the national and international standards. We have a wide collection of various weld nuts in various materials and, in both inch and metric sizes.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet
3. As customers' requirement
Port
NEW DELHI
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Anchor bolts, used to connect structural and non - structural elements to concrete. We supply wide range of anchor bolts from wedge anchors that can secure into concrete to small conical drywall anchors. There are four types of Anchor Bolts i.e. L shaped, double-end rods with plate, headed, and swedge, each having their own sizes and applications. Anchor bolts prevent separation, lifting, moving and falling of the objects to which they are fastened. If you are searching for a reliable supplier of Anchor Bolts, DIC is ready to serve your all kinds of needs. All kinds of Customized and non-customized sizes are available with us.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag;
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet;
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Eye Bolts, a commonly used component in various construction works. Eye Bolts are externally threaded fastener featuring loops that secure cable, wires and chains to help with vertical lifting. Eye bolts are made by hot forging and cold forging, with and without shoulder. These eye bolts are made with high tensile alloy steel, carbon steel, stainless steel, and ASTM specifications for high tensile material confirming to ASTM A193, A307, and A325 etc. We carry wide assortment of eye bolts. We provide both bent eye bolt and forged eye bolts. Eye Bolts are used to lift and transport heavy objects.
It is attached to the target object and the wire or chain is passed through the ring for lifting work. These are used in industries such as civil engineering industry, construction and shipbuilding.
We supply Bent Eye Bolts in steel zinc and 18-8 (300 series stainless steel). It also contains machine and lag threads for both materials. We also have the capability to supply special made bent eye bolts per your requirement.
These bolts are used when there is larger working load than for a bent eye bolt. Our diameter starts from and can supply them up to 1. We have the capability to supply your eye bolts as per your requirement of thread lengths and eye sizes.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag;
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet;
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Flange Bolts, having circular flange under the head that acts like a washer to distribute the load. Flange bolts may be partially threaded or fully threaded. These bolts are used in automotive uses; plumbing and more. The flange made the bolts suitable for use in hard to reach areas; hence it is ideal choice for heavier industrial applications. Flange screws and bolts can be secured much more quickly and efficiently than many other screws, because no washer is required.Flange Bolts are available in material like stainless steel, carbon steel and alloy steel to bear more wear and tear while also making it more corrosion resistant. If you are looking for a reliable supplier of Flange Bolts, DIC is ready to serve all your needs. All kinds of customized and non- customized sizes of Flange Bolts are available with us.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag;
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet;
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Hex Bolts, used to fasten two or more parts together. Bolts are mostly used in repair and construction work and can be used for many other different applications that include fastening wood, steel, and other construction materials for projects such as bridges, highway structures and buildings. Hexagonal Bolts are most commonly used fastener among all and is generally suitable for heavy duty applications.
Hex Bolts which consist of 6 sides on the head, come in variety of plating and materials. We offer zinc, zinc yellow, black oxide, and other coatings as required. Our sizes start at 1/4 diameter and go up to 2-1/2. If you are looking for a reliable supplier of hex bolts, DIC is ready to serve all your needs. All kinds of sizes, grades and material range is available with us.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag;
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet;
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of J Bolts, is a J- shaped bolt with machine screw at the shaft and an open hook at the end, used for anchoring pipes, and round or square profiles. J Bolts are often known as bent hook bolts, bent J bolts, J hook bolts etc. We provide corrosion-resistant and durable J- Bolts according to our client requirements.J bolt is used in variety of applications, often they are used in structural applications like securing walls to concrete foundations. Each bolt comes with a furnished hex nut. Due to its open hook design, J bolts provide partial support to structural. The bolts are made from several materials and subjected to various treatments depending on how and where they will be used.If you are looking for a reliable supplier of J Bolts, DIC is ready to serve all your kinds of needs. All custom and non- custom fasteners can be provided by us.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag;
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet;
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Square Bolts, usually used in new construction along with square plate washer and taper washer. These Bolts are most commonly used for aesthetic purposes to provide a rustic look in a new structure or to match existing fasteners in an older structure. Square Bolts are easy to tight using a wrench with a nut.DIC Fasteners supply Square Bolts from 1/2 diameter through 2 diameter in most ASTM, AASHTO, and SAE specifications. Special tooling can also be created to produce non-standard head dimensions or head bolts as per specific requirement. We offer a huge selection of Square Bolts in plain, zinc, and hot dipped galvanized which provides the most- corrosion resistance for harsh environments. All standard and non-standard sizes, lengths and materials are available with us.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union
Packaging Details : 1. Bulk packing 25 kg in a carton or bag;
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet;
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Shoulder Bolts, also known as Shoulder screws are widely used in wide variety of applications because of their versatility and unique attributes upon installation. Shoulder bolts have three main parts: the head, the shoulder and the thread. It can be specify by its shoulder diameter and shoulder length.Also known as stripper bolts, shoulder bolts are screws with an unthreaded shoulder which is larger in diameter than the threads. We are a reliable supplier of shoulder bolts, made using high quality raw material.We can supply shoulder bolts in all material categories, grades and various ASTM specifications. If you are looking for a reliable supplier of Shoulder Bolts, DIC is ready to serve your all kinds of needs.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag;
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet;
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Concrete screws, also called anchor screws, designed for quick, safe, secure fastening for a variety of jobs in concrete, brick and cinder block/ masonry. These screws cut their own threads and when used in concrete, brick or block they eliminate the need for an anchor in light or medium-duty applications. Concrete screws are easy to use and remove, theres no hammering required or anchor or shield to install. These are available in two head styles: flat head and hex head. Flat head concrete screws have a Philips drive style, while hex head can be slotted or unslotted head style.
TYPES OF CONCRETE SCREWS:
Concrete screws size range varies between 3/16- and 1/4-inch diameter, in lengths up to 3-3/4 inches. Moreover, any customized sizes, lengths and materials are available on request.If you are looking for a reliable supplier of any kind of fastener, DIC is ready to serve your all kinds of needs.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag;
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet;
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Deck Screws, typically come with a flat bugle head and can come either with a phillips or square recess drive. The screws are used for securing pressure treated lumber when building decks, fences, or similar outdoor structures. Deck screws come in either carbon steel or stainless steel 300 series with a Dacrotized finish that provide high resistance to corrosion.Dacrotized finish can be used in treated lumber without discoloring the wood and it is similar to galvanized coating.Deck Screws feature type 17 point which allows for an easy installation in wood and composite deck materials. DIC supply wide range of lengths suitable for your next decking project. If you are looking for a reliable supplier of any kind of fastener, DIC is ready to serve your all kinds of needs.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag.
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet.
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Drywall Screws, used for the attachment of drywalls to a pre- prepared structure. It is the most constant method of finishing the construction of interior walls and ceilings. These screws have deeper threads than the regular screws, which prevents them from dislodging easily from the drywall. In addition, drywall screws are also used along with plastic anchors that help to distribute the weight of the hung object evenly over the surface.The sharp end of Drywall Screws is designed to make hole in 1mm metal and ensure immediate and wobble free penetration of the board. A Standard Drywall Screws can be recognized by its black colour, this finish comes from a phosphate coating which is applied to these screws.Our Drywall Screws comes in coarse thread, fine thread, and high-low pattern thread, and sometimes feature a trim head rather than a bugle head.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag;
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet;
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Machine Screws, used to hold parts together in all types of machines such as electronics, engines and huge industrial manufacturing equipment. Machine screws comes in various head types, most common head types includes pan head, flat head, round head, oval head, truss head and hex head.Round head screws are most commonly used while flat heads are particularly useful when the screws need to be flush with the surface screwed onto.Machine screws have a consistent diameter the entire length of the shaft as opposed to tapered screws which have a pointed tip at end. These are smaller screws with uniform threads. Our Machine screws are available in a variety of head styles, materials, and sizes depending on the particular application.Besides standard sizes, we also provide non-standard sizes as per your drawings.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag;
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet;
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
DIC Fasteners is a Manufacturer of Sems Screws, a combination of a screw or a bolt with a built-in washer or set of washers. These are also known as captive fasteners since they are associated with one or more permanently fixed washers. Sems screws allow for fast installation, permanence and easy adaptability to many applications, with washers under the head. As these screws use washers, they have an inherent ability to distribute the load on the surface evenly.Their installation is simple and time-saving. Thats why it is even used for electrical components designing and manufacturing.We supply Sems Screws in various materials such as stainless steel, carbon steel, and alloy steel to bear more wear and tear while also making it more corrosion resistant. These are available in all sizes, grades and materials as per specific requirement.
WE OFFER STYLES OF SEMS SCREWS:
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet
3. As customers' requirement
Delivery Time : 20-25 Days
dic fasteners is a manufacturer of set screws that typically comes headless with just a drive on top. it is a type of screw that is used to secure object within or against another object. set screws are also known as a blind screw or a grub screw, are widely used in all manner of engineering, product design and repair applications, often keep a potentially moving part locked in place. a set screw can be identified by its headless body; its entire body is threaded and comes in various dimensions. it has different point types depending on the applications such as plain cup, knurled cup, flat, oval, cone, half dog, and soft tipped. we offer multiple selections of set screws that are durable and versatile for any applications.
common type of set screws involves:
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet
3. As customers' requirement
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Shoulder Socket Screws, used in applications that require a decent tensile strength. These are used in punch and die applications. Shoulder Socket Screws are also referred to as shoulder bolts, stripper bolts or precision shoulder screws. The plain-shouldered section of Shoulder screws is larger in diameter than the threaded section of the fastener and is usually used as a pivot, shaft or stationary guide in applications such as pulleys, cams, gears, latches etc. Its outer head is commonly knurled allowing better manual tightening and grip from the user.Our Shoulder socket screws are available in sizes from M5 to M20 with other diameters and length as required. We offer shoulder bolts in various materials, sizes and thread profile to meet customer specific requirement.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet
3. As customers' requirement
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Socket Cap Screw, machine screws with a cylindrical barrel-shaped head containing a hexagonal socket. The screws are used in machine parts, die fixturing, and clamping. Socket Cap Screw is a threaded fastener whose head diameter is normally 1.5 times or more than the screw shank diameter.Our Socket Cap Screws are made of alloy steel and scientifically heat treated, they are stronger than conventional screws, size for size. These screws are also referred to as socket head cap screw, a cap head socket screw or hex socket head screw. Besides Socket Cap Screw, we also offer hex keys to install them. We can supply these screws in materials such as Inconel, Brass, Aluminum, Hastelloy and many others.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag.
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet.
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Thumb Screws that can be used to tighten without tools. Thumb Screws has specially designed head that makes it easy to turn with one head. It offers hand- adjustment feature which allows for simple action to fasten, tighten, loosen or remove the screws. The main advantage of thumb screw is that no tools are needed so end user consumer can adjust the screws with thumb. These are installed in pre drilled and tapped holes and tightened by hand.Thumb screws head varies in shapes and includes plain and hex socket head. Plain Head Thumb Screws have a flat head with straight knurled surface and Hex Socket Head Thumb Screws have raised knurled head for fastening by hand.
Some of the common applications for thumbscrews include:DIC offer Thumb Screws in various materials which include stainless steel, brass, aluminium, nylon, steel zinc and black oxide in both inch and metric sizes. All kinds of standard as well non-standard Thumb Screws can be supplied by us.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag.
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet.
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Wood Screws in different styles and materials. The screws are specifically designed to fasten together pieces of wood. Wood Screw is a steel screw used to clamp items into wood, chipboard, MDF and wood pulp based materials. Wood Screws are made in a wide variety of diameters and lengths in either hexagonal or square heads.Our range of woodworking screws includes wood screws for assembly of wooden components or attaching hardware to those components, mechanical screws for temporary or permanent assembly of knock- down furniture and cabinetry and for assembly or hardware installation.
DIC offers various types of Wood Screws in different styles which includes:
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag.
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet.
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Flange Washers, designed to maintain minimum load to tighten bolts. Flange washers has raised up inside diameter with a flange base. These are also known as pressure washers as they maintain the union pre charged with consistent with constant load, absorbing the relaxation which occurs due to temperature changes. DIC Flange Washers are designed to maintain sufficient bolt tension in high temperature and high pressure applications where safety is utmost priority.DIC Flange Washers are simply Belleville springs that are designed to be used in flange application. The springs of flange washers are set up to fit into flange designs and loads are typically higher than the standard washers. If you are searching for reliable and best source of Flange washers, and other similar components such as structural washers, stainless dock washers or zinc flat washers, DIC is ready to serve all your needs.
We can provide you with comprehensive support in addition to offering competitive price and high quality products. All types of Custom Washers can be provided by us as per requirement.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag.
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet.
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Flat Washers, placed under the head of bolt or nut in order to provide a smooth bearing surface and distribute the fastener load over a wide area. Flat washers are available in various Materials as per need. These washers protect surface by evenly distributing torque when a bolt or screw is tightened and prevents corrosion between a steel screw and an aluminum surface.Flat washers can be used when working with soft materials and oversized or irregular-shaped holes.
DIC Flat washers are commonly available in variety of materials including aluminum, brass, nylon, silicon bronze, stainless steel and steel in various grades and coatings. Common coatings are zinc plating and hot dip galvanizing. Hot dip galvanized coating is usually recommended when flat washers are to be used with pressure preservative treated wood.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag.
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet.
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Lock Washers, designed to keep nuts and bolts from coming loose because of vibration and torque. The basic concept of lock washers is to hold the nut and bolt in place. Various types of lock washers are available and each one have specific application. Washers dimensions can come in inch and metric units.
Various types of Lock washers available with us include:
Internal Tooth Lock washer
External Tooth Lock washer
Internal External Tooth Lock Washer
Split lock washerr
Hi-collar split Lock Washers
Lock set pair Lock Washers
Our lock washers comes in variety of materials which includes low carbon steel, through harden steel, various grades of stainless steel, silicon bronze, brass, aluminum and other material. . If you are searching for reliable and best source of Lock washers, and other similar components, DIC is ready to serve all your needs. We can provide you with comprehensive support in addition to offering competitive price and high quality products.All types of Custom Washers can be provided by us as per requirement.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag.
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet.
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Shoulder Washers, used to insulate against moisture and electricity, and are often used as guides, bumpers and spacers. We have wide variety of non-metallic shoulder washers. We carry these washers in materials such nylon, Teflon, phenolic, fiber and other materials. Shoulder washers are great for thermal and electrical insulation, since they are non- metallic.We supply wide range of washers up to 1- outside diameters. Wide range of size options are available for shoulder washers with different inside diameter, shoulder thickness and lengths.If you are searching for reliable and best source of Shoulder washers, and other similar components, DIC is ready to serve all your needs. We can provide you with comprehensive support in addition to offering competitive price and high quality products.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag.
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet.
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of a wide variety of Spring Washers, sometimes also called disc springs, provide a vibration resistant function, they contain ring split at one point and bent into a helical shape, causing the washer to exert a spring force between the fastener head and bearing face which maintains the washer hard against the face. We provide spring washers in every material such as brass, copper, aluminum, mild steel, stainless steel, carbon steel, high tensile steel, plastic etc. We make sure that all our products meet the desired industrial spring washer standard and apply for all spring washer use. The washers are made out of spring steel and are hardened to HV 430 to 530.
We provide various styles of spring washers in wide range of sizes:
Wave
Internal
External
Internal/External
Countersunk internal
Countersunk external
Belleville
Conical
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag.
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet.
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fastener is a Manufacturer of Blind Rivets, also known as pop rivets, consists of both the rivet as well as a mandrel. Blind rivets are ideal for projects where access to the joint is limited to one side only. The rivets are available in various head types, length, diameters and material based upon specific application. Before installing the blind rivets it is important to know the details of the application on which they are to be installed like hole diameter, grip, materials to be fastened, shear and tensile resistance etc. Rivets come in variety of head types each having different benefits.
Most common rivet type includes:
Our stock of rivets includes variety of rivet nuts and tools required to install rivets. If you are searching for a reliable supplier for various kinds of rivets, DIC is ready to serve your all kinds of needs as per your specific requirement.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag.
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet.
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Semi Tubular Rivets also known as tubular rivets are same as solid rivets, but it has shallow hole at the top, opposite to the head. The purpose semi-tubular rivet is to minimize the amount of force needed for application by rolling the tubular portion outward. This is most common forms of rivets used, can be used for multiple applications, such as luggage, brakes and 3 ring binders. Depending on the application, semi tubular rivets can be either tight or loose.
Our head style includes:
MATERIAL INCLUDES:
DIC Fasteners offers a wide variety of semi- tubular rivets, start at 1/6 of an inch diameter and go all the way up to 3/8 of an inch. We carry a huge stock of semi-tubular rivets in a variety of sizes, materials and head style. Moreover, any kind of custom rivet can be provided by us as per specific requirement.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag.
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet.
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Spring Pins, a hollow, split dowel pin that exerts uniform outward pressure when fitted into a nut or shaft hole. These are headless cylinder shaped tube with a slot that runs down the middle of the pin. Spring pins are also called tension, roll and expansion pins. These are installed in holes slightly smaller than the outside diameter of the pin. Throughout its installation, the pin is compressed along its length to create a tension which holds it tightly in the hole.
Spring pins are referred to as most universal, economical and time saving because they can be installed in a single operation. Typically spring pins are of two types: Slotted Spring Pins and Coiled Spring Pins.
DIC Fasteners carries wide assortment of spring pins in various materials which include stainless steel (in 302 and 420 stainless steel), and alloy steel (plain and zinc) both in inch and metric sizes. All types of Custom and non- custom sizes are available with us.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet
3. As customers' requirement
Delivery Time : 20-25 Days
A threaded rod, also known as a stud, is a relatively long rod that is threaded on both ends; the thread may extend along the complete length of the rod. They are designed to be used in tension. Threaded rod in bar stock form is often called all-thread. As for types of metal used in the manufacturing of threaded rod, the most common include low carbon steel, B7 and stainless steel. However, other metals used include: Grade 5 and Grade 8, stainless steel 303, 304 and 316, A449, Brass, aluminum, copper and silicon bronze.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet
3. As customers' requirement
Delivery Time : 20-25 Days
A threaded rod, also known as a stud, is a relatively long rod that is threaded on both ends; the thread may extend along the complete length of the rod. They are designed to be used in tension. Threaded rod in bar stock form is often called all-thread. As for types of metal used in the manufacturing of threaded rod, the most common include low carbon steel, B7 and stainless steel. However, other metals used include: Grade 5 and Grade 8, stainless steel 303, 304 and 316, A449, Brass, aluminum, copper and silicon bronze.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet
3. As customers' requirement
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Flange Nut, having wide flange at one end that acts as an integrated, non- spinning washer. Flange nuts distribute the load evenly to avoid uneven fastening surface of the operations. They make sure that the fasteners are in place without moving about loosely. The base of the flange is normally plain but can have radial serrations that produce a locking action on the bearing surface. Flange nuts are mostly hexagonal in shape coated with different types of coating depending on application.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet
3. As customers' requirement
Port
NEW DELHI
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Keps Lock Nuts, a hex nut with captive free spinning lock washers, which are often external tooth. Keps nuts are most common lock nuts because of its versatility, cost, and ease of installation. They are perfect for applications where quick assembly or disassembly of fasteners is required. Keps Nuts have washer integrated on one side which provides locking tension when tightened. Washers can be external or internal tooth lock washers or split lock washers depending on the applications.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet
3. As customers' requirement
Port
NEW DELHI
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Thumb Nuts, circular shaped nuts with knurls on the sides to easily tighten without tools. We offer wide range of thumb nuts including: adjusting nuts, knurled nuts, tommy nuts and lock nuts, in both metric and imperial sizes. Thumb Nuts can be tighten by hands without any tools. Thumb nuts or knurled nuts are used mostly on finished products such as light fixtures, antique cars and motorcycles. It provides a unique and finished look.The benefit of using Thumb nut is that it improves the ease of removal, deters the possibly over-tightening/stripping, and does not require any tools to manipulate the fastener.If you are looking for a reliable supplier of Thumb nuts, DIC is ready to serve your all kinds of needs. All kinds of custom as well as non- custom sizes, materials are available with us.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag.
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet.
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Thumb Nuts, circular shaped nuts with knurls on the sides to easily tighten without tools. We offer wide range of thumb nuts including: adjusting nuts, knurled nuts, tommy nuts and lock nuts, in both metric and imperial sizes. Thumb Nuts can be tighten by hands without any tools. Thumb nuts or knurled nuts are used mostly on finished products such as light fixtures, antique cars and motorcycles. It provides a unique and finished look.The benefit of using Thumb nut is that it improves the ease of removal, deters the possibly over-tightening/stripping, and does not require any tools to manipulate the fastener.If you are looking for a reliable supplier of Thumb nuts, DIC is ready to serve your all kinds of needs. All kinds of custom as well as non- custom sizes, materials are available with us.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet
3. As customers' requirement
Port
NEW DELHI
Delivery Time : 20-25 Days
DIC Fastener is a Manufacturer of Weld Nuts, a special type of nut specifically designed to be welded to another object. The nuts are closely fixed to the target material and can be circular, square or hexagonal. One advantage of weld nut is that it can be used in restricted or limited space areas after installation. Its thicker design makes it suitable for heavy duty applications. We have a wide variety of weld nuts in many different styles and sizes. These nuts form the strongest bonds when compared to mechanically clinched fasteners. However, these are not plated for corrosion protection due to the necessary welding process.Our weld nuts are made under strict supervision of professionals in accordance with the national and international standards. We have a wide collection of various weld nuts in various materials and, in both inch and metric sizes.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag.
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet.
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Carriage Bolts, comes with a square neck under the round head. Carriage Bolts have a smooth domed head with a square section under that pulls into the material to prevent spinning during installation. As they are used with wood, carriage bolts are rarely high strength and virtually always supplied in ASTM standard. These are used in different industries for assembling and fixing the machines and equipment. DIC Fasteners is specialized in manufacturing and supplying a wide variety of Carriage bolts which resist to rust and chemical and serves the users long duration. Carriage bolts are supplied in both inch and metric dimensions. Moreover all kinds of sizes, material and grades of carriage bolts are available with us.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag;
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet;
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Elevator Bolts, a large flat head bolt designed to hold together canvas belts in conveyer systems. They get their name from being used in grain elevators and other conveyor systems. Elevator Bolts consist of a wide, countersunk flat head, a square neck and a unified thread pitch. These are often referred to as bucket bolts or elevator bucket bolts, often used with hex nuts or nylock nut along with washer set. Elevator Bolts are being produced in all sizes, materials and ASTM specifications as per specific request. The common use of elevator bolt is industrial or agricultural belting systems or conveyor systems, where head clearance must be minimal and wide thin bearing surface is desired. If you are looking for a reliable supplier of elevator bolts, DIC is ready to serve all your needs as per your specific requirement.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag;
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet;
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Hanger Bolts, have machine screw thread on end and lag screw thread with a gimlet point on the other side. These are headless bolts with lag or wood screws threads at one end while machine threads at the other. They are used for overhead applications such as attaching sheet metal or electrical wires and typically need a pre drill hole. Hanger bolts are also known as headless hanger bolts or hanger screws. The dimensions are defined in both metric and imperial sizes with unified coarse pitch, fine pitch, and ISO metric thread profile. As hanger bolts are headless so they require a specific driver tool to install them. Our Hanger bolts are supplied in all material categories and ASTM specifications. We supply premium quality Hanger Bolts from Nickel Alloys , Stainless Steel, Super Alloy , Duplex steels & Super Duplex, Copper & Copper Alloys, Aluminium Alloys , Bronze alloys, Titanium grades with ASTM/ASME/DIN Standards & Specifications.Also, we provide passivation, quality coating further processing as per customer requirement. If you are looking for a reliable supplier of hanger bolts, DIC is ready to serve your all kinds of needs. All types of Hanger bolts are available in standard as well as non-standard sizes.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag;
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet;
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Heavy Hex Bolts, having a larger heads than the standard hex bolt. The bolts are designed for use in a variety of high-temperature and high-strength industrial applications. They have a wide head than the standard or regular hex bolts and provide a great bearing surface that distributes the clamping load over a wider area. Heavy hex bolts can be made with different materials including low and medium carbon steel, alloy, and stainless steel in different platings as hot dip galvanized, phosphate, zinc, and Cardium plating. They are supplied in both metric and imperial sizes. If you are looking for a reliable supplier of hex bolts, DIC is ready to serve all your needs. All kinds of sizes, grades and material range is available with us.
OUR HEAVY HEX BOLTS INCLUDES:Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag;
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet;
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of T- Bolts, often used to make a bolted joint. T- Bolts are same as T- nuts in function but offer a male threaded extrusion for attaching modular elements to your fixture or application. These are closely related to screws and useful in making jigs and fixtures, especially when used with our aluminum extrusions. We have well equipped storage facilities that stores the biggest inventory of different types of T- Bolts such as brass T-Bolts, copper T- Bolts, and Nickel alloy T- Bolts that can be shipped at client notice. If you are looking for a reliable supplier of T- Bolts, DIC is ready to serve your all kinds of needs. All kinds of customized and non -customized bolts can be supplied by us.
T BOLTS SPECIFICATIONS:
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag;
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet;
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Lag Bolts also called Lag Screws, are large wood screws with hexagonal heads, having sharp cutting thread and shoulder below the head. Lag Bolts have a hex head that is designed to be driven with a wrench or hex driver. These are basically large wood screws with the diameter range from 1/4 to 3/4, and lengths from 1 to 24 or longer, with coarse threads of a wood-screw or sheet-metal-screw thread form.Lag Bolts are usually large, heavy duty bolts, though smaller variations are available for use in furniture and cabinetry industries. We provide Lag Bolts in stainless steel, Carbon Steel & Alloy Steel with Hot dipped galvanizing as protective coating. If you are looking for a reliable supplier of Lag Bolts, DIC is ready to serve your all kinds of needs. All kinds of standard and non-standard sizes, lengths and materials are available with us.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag;
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet;
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Machine Bolts, having variety of different features. The bolts are used to fasten wood to wood, wood to metal and metal to metal. Machine bolts are also known as hex bolts, square bolts depending on head style. The bolts can be cut with fine or coarse threads that extend in length from double the diameter of bolts plus to double the diameter plus .Machine bolts are made from wide types of grades and types to suffice for the abundance of applications machine bolts are used. Common types of bolts include silicone bronze, brass, stainless steel, and zinc plated bolts. The heads of machine bolts can be square, hexagonal, rounded, or flat countersunk depending upon the applications. Common diameter of machine bolts ranges from to 3 depending upon the length required for each application.If you are looking for a reliable supplier of machine bolts, DIC is ready to serve with all your needs. All kinds of customized and non -customized bolts can be supplied by us.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag;
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet;
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Plow Bolts, typically used in snow plows and other heavy industrial equipment. Plow Bolts come with flat head, domed head, clipped head or elliptical head. These are heavy duty fasteners with non- protruding head, commonly found in farm, road construction and other heavy equipment. The bolts are used to attach the plow share (blade) to the frog (frame) and allow earth to pass over their heads without interference to the moldboard. The top head of the Plow Bolt can be flat, dome-shaped, conical shaped depending on the application.DIC Fasteners supply high quality Plow Bolts made from stainless steel, Super Alloys, Duplex steels & Super Duplex, Copper & Copper Alloys, Aluminium Alloys, Bronze alloys, Titanium grades with ASTM/ASME/DIN Standards & Specifications as per requirement. Plow Bolts are available in different dimensions in both metric and imperial threads.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag;
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet;
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Structural Bolts, designed for steel to steel applications and high load applications requiring a high tensile strength, such as construction of bridges and buildings. These are different from standard hex bolts by having heavy hex head to give it a larger bearing surface. They also come with larger unthreaded shank compared to same lengths to hex cap screws.DIC Fasteners carries A325, A490 heavy hex bolts and tension control bolts. Since these bolts are used for steel to steel connections, thats why structural bolt is designed with a shorter shank/ thread length than the standard hex bolt or hex cap screw. If you are searching for a reliable supplier of Structural Bolts, DIC is ready to serve your all kinds of needs. All kinds of customized and non-customized sizes and material is available with us.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag;
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet;
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
DIC Fasteners is a Manufacturer of Toggle Bolts, also known as butterfly anchor is used for hanging objects on hollow walls such as drywall. There are many different styles of bolts designed for use in specific applications; from hanging shelving and cabinetry on wallboard to supporting commercial and industrial fixtures on hollow materials such as cinder blocks.Toggle Bolts have folding metal wings that are held closed to be inserted into a drilled hole. Over being pushed through the wall material the spring-loaded wings pop open, restricting the toggle bolt from being pulled back through the hole. Reverse pressure is applied to the bolt to hold the wings against the wall, enabling the bolt to be tightened without the wings spinning. Once the Toggle Bolt is installed, the bolt itself may be removed, but the toggle will remain behind the wall. It can be simply pushed through the wall and the hole patched, when not required.If you are searching for a reliable supplier of toggle Bolts, DIC is ready to serve your all kinds of needs. All customized as well as non -customized sizes and material can be supplied by us.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : 1. Bulk packing 25 kg in a carton or bag;
2.1 kg in a box/bag, 25 boxes/bags in a carton then pallet;
3. As customers' require FOR Professional screw wood with CE certificate for New design machine screws with low price.
Delivery Time : 20-25 Days
Focal Point, Patiala, Punjab 
