Our Products
Sensors
2 Products availableMeasuring Instruments & Equipment
2 Products availableLevel Transmitters
2 Products availableAuto Interior Accessories
1 Products availableLED Lights
1 Products availableComputer Monitor
1 Products availableOur offered Product range includes mobile digital recording Device, auto dipper, Heated shutter camera and Cylinder camera.
When driving two hours at a speed of 100km/h, the driver has to struggle to stay awake on account of his lower levels physiological functions followed by inattention. In general, accidents rates are extremely high when the driver drives over 6 hours a day or is lack of proper rest (less than 4 or 5 hours ) According traffic accidents analysis from Europe and USA, 80-90% was caused by human factors. In USA, about 100, 000 traffic accidents were caused because of fatigue or drowsy driving every year, which leads to 1500people die, Similar situation in Europe? take Germany as an example, 25% of traffic accidents were caused by fatigue or drowsy driving.
DMI DDS works based on Advanced Face Recognition and Pupils Detection technology, detects drivers drowsy status, stores drowsy image and give outs alarm and reminding signals. It can help prevent drowsy driving and lower traffic accidents rate.
The Tire Pressure Monitoring System (TMPS) is an electronic system in your vehicle that monitors your tire air pressure and alerts you when it falls dangerously low.TPMS notifies you when your vehicles tire pressure is low or is going flat. By helping you maintain proper tire pressure, TPMS can increase your safety by improving your vehicles handling, decreasing tire wear, reducing braking distance and bettering fuel economy.
The PDTS display is a high quality low cost display unit for displaying angle in both X and Y axis (pitch and roll) to the operator. It can interface with many of our inclinometer sensors depending on the requirements for the application. The high contrast LED display is viewable in low light and direct sunlight, and the LED brightness is adjustable. It is designed to be panel mounted and is supplied with a sealing gasket and hardware for mounting on plates between 1mm and 10mm thick. As well as displaying angle it also has a built in tilt switch functionality. The two on board relays can be configured to operate when a certain angle is exceeded in the X or Y axis (or both), in either the positive or negative direction (or both). It is highly configurable with adjustable threshold, hysteresis and delay. There is a USB interface to allow the angle to be monitored or logged on a PC. The devices can be factory configured for OEM applications, or user configured using the simple Windows based configuration application supplied free of charge with this product. When connected the USB interface will supply power to the display and sensor. DC Power is supplied to the display, which in turn will provide power to the sensor, simplifying the wiring requirements. Connection is via spring release terminal block for simple and secure wiring.
Features
Specifications
PowerCurrent: 0.2 Amps
Durability & Standards
A Tyre Protection Chain is a close mesh of high-alloy, drop-forged, steel, wear links which wraps around the tyre to protect the tread and sidewalls. The flexible nature of the mesh enables the chain to adjust to the tyre as it deforms during the loading or hauling operation. The chains highly-efficient, self-cleaning properties prevents the mesh from becoming filled and clogged thus achieving the best possible traction and increasing the loaders productivity.
Through 70 years of development in co-operation with owners and operators of wheeled loaders and dump trucks, together with on-going investment in state-of the-art production facilities and quality control labs in Europe and South America, we have achieved pre-eminence in the tyre protection chain market with a wide range of chains designed to match the challenges of a multiplicity of site conditions.
By protecting tyres from excessive abrasion, punctures and sidewall damage, our Tyre Protection Chains saves thousands of dollars in tyre replacement costs and assures full loader productivity. For your confidence, our experts will be on hand from your initial enquiry, through delivery and installation, routine check-ups and on-call 24/7 for the life of your tyre protection chain.
At some sites, where the terrain is slippery because of mud or where trucks have to contend with icy haul roads, poor traction can be a major problem.Wrestling to control a loaded truck with a rend of its own is exhausting for the operator. can reduce concentration and risks losing the truck with all the collateral damage that may invoke. Where the tyre tread. atone. cannot provide an adequate grip. Our traction chains in protection plus traction.
By recording footage from vehicle mounted cameras, mobile digital recording provides an accurate witness, giving irrefutable evidence in the case of false claims, crash for cash incidents or vandalism. Disapproving these claims means companies can make major cost savings, whilst importantly supporting their drivers, who are often the subject of increased scrutiny.
The Nordic CENTAURUS LED work lamp delivers stunning illumination and is equipped with the revolutionizing QUAKE dampening system. The new QUAKE dampening system takes protection against vibration and shock to a whole new level never seen before. The work lamp meets the expectations of the most demanding situation.
Features:
Specifications:
Features
PowerPower consumption: 5 WattsCurrent: 0.4 Amps
Durability & Standards
Specifications
Features
Specifications
PowerPower consumption: 2.3 WattsCurrent: 0.2 Amps
Durability & Standards
South Tukoganj, Indore, Madhya Pradesh 