Inverter

DATAVISION Digital inverter is based on the latest state-of-the-art embedded Microcomputer technology from Microchip incU.S.A. The Digital Technology used in the product offers HighReliability, Optimum performance and enhances the life of the batteries and reduces the effort needed for regular maintenance procedures.

MICRO CONTROLLER BASED DESIGN
LED/LCD Alphanumeric Display
Software controlled CC-CV Charging Technology
Smart Multistage Charging with Top-up Pulse Mode
Battery status Monitoring and Display
Realtime input Main Voitage Monitoring
Load Status Display on Battery Mode
Smart Overload Sensing with Auto-Restart
SAFETY INSTRUCTIONS
- Always connect the inverter to a two pole, three wire mains socket. The socket must be connected to appropriate branch protection ( fuse/ circuit-breaker).
- Always ensure that the electrical connection to the inverter is properly earthed. Improper earthling might cause unexpected current leakage and prove hazardous.
- Do not install the inverter in open, excessively humid place or where there is water. Foreign objects or water ingress inside that unit can severely damage the internal components of the inverter.
- Care should be taken to ensure that the inverter is kept away from direct sunlight and heat emitting appliances. The place of installation should be well ventilated and easily accessible.
- The inverter does not contain any user serviceable parts inside. Do not attempt to remove the cover the unit. Live main present inside the circuits can render and electric shock.

Electronic Short Ciruit Protection on Batt Mode

Inverter

SALIENT FEATURES

DATAVISION Digital inverter is based on the latest state-of-the-art embedded Microcomputer technology from Microchip inc U.S.A. The Digital Technology used in the product offers High Reliability, Optimum performance and enhances the life of the batteries and reduces the effort needed for regular maintenance procedures.

MICRO CONTROLLER BASED DESIGN
LED/LCD Alphanumeric Display
Software controlled CC-CV Charging Technology
Smart Multistage Charging with Top-up Pulse Mode
Battery status Monitoring and Display
Realtime input Main Voitage Monitoring
Load Status Display on Battery Mode
Smart Overload Sensing with Auto-Restart
Electronic Short Ciruit Protection on Batt Mode

SAFETY INSTRUCTIONS

Always connect the inverter to a two pole, three wire mains socket. The socket must be connected to appropriate branch protection ( fuse/ circuit-breaker).
Always ensure that the electrical connection to the inverter is properly earthed. Improper earthling might cause unexpected current leakage and prove hazardous.
Do not install the inverter in open, excessively humid place or where there is water. Foreign objects or water ingress inside that unit can severely damage the internal components of the inverter.
Care should be taken to ensure that the inverter is kept away from direct sunlight and heat emitting appliances. The place of installation should be well ventilated and easily accessible.
The inverter does not contain any user serviceable parts inside. Do not attempt to remove the cover the unit. Live main present inside the circuits can render and electric shock.

OPERATING MODES OF THE INVERTER

Mains/charging of the mode
The inverter function on Mains Mode when the input AC mains is within the stipulated range from 90V AC to 280 V AC. The charger section starts functioning and continues to boost charge the batteries till the top-up voltage is reached . Thereafter the batteries are pulse charged to maintain optimum battery condition for an extended period of time.The connected loads are fed from input Mains Power. LED status indicator is GREEN. In the LCD models, mains Mode , Charging Mode, Mains input voltage, Battery level percentage etc are sequentially displayed on (16×2) backlit LCD.

Inverter / Backup mode
In the event of brownouts (<90V AC) on High Voltage (>280V AC) or Total Mains Failure(blackouts), the Inverter switches to loads derived from the Batteries. The Inverter keeps on supplying power till the time the battery gets depleted, in which case the inverter put out an alarm and thereafter shuts off. During invertor Mode, if for any reason the inverter gets overloaded , it trips and then restart after a while. The inverter makes a total of 5 restart attempts. Front panel LED status indicator is RED. In the LCD models, Inverter mode, Battery level percentage, Load level percentage, Input voltage level etc are sequentially displayed on (16×2) backlit LCD.

REAR PANEL DESCRIPTION

Three Pin Mains input Terminal Block for mains input
Positive (Red) & Negative (Black) Battery Leads
Output Socket for connecting Load
Circuit Breaker for Mains Input Protection.

Technical Specification

Input Voltage Range :	90-280 V AC
Low voltage Cut-Off :	90 V AC+ 10 V
High Voltage Cut-Off :	280 V AC + 10 V
Output Voltage (on Mains) :	Same as input
Output Voltage (on Batt) :	195-245 V AC
Transfer Time :	Within 20 ms
Frequency (on Batt) :	50 HZ + 1%
Charging Current :	10% of Battery Content
Pulse Charging Mode :	Auto Top-up Pulse Mode
Mains Mode Overload :	Circuit Breaker Trip
Inverter Mode Overload :	Electronic Shut Down
Auto Restart Feature :	Yes
Inverter short circuit :	Electronic Shut Down

Inverter

SALIENT FEATURES

DATAVISION Digital inverter is based on the latest state-of-the-art embedded Microcomputer technology from Microchip inc U.S.A. The Digital Technology used in the product offers High Reliability, Optimum performance and enhances the life of the batteries and reduces the effort needed for regular maintenance procedures.

MICRO CONTROLLER BASED DESIGN
LED/LCD Alphanumeric Display
Software controlled CC-CV Charging Technology
Smart Multistage Charging with Top-up Pulse Mode
Battery status Monitoring and Display
Realtime input Main Voitage Monitoring
Load Status Display on Battery Mode
Smart Overload Sensing with Auto-Restart
Electronic Short Ciruit Protection on Batt Mode

SAFETY INSTRUCTIONS

Always connect the inverter to a two pole, three wire mains socket. The socket must be connected to appropriate branch protection ( fuse/ circuit-breaker).
Always ensure that the electrical connection to the inverter is properly earthed. Improper earthling might cause unexpected current leakage and prove hazardous.
Do not install the inverter in open, excessively humid place or where there is water. Foreign objects or water ingress inside that unit can severely damage the internal components of the inverter.
Care should be taken to ensure that the inverter is kept away from direct sunlight and heat emitting appliances. The place of installation should be well ventilated and easily accessible.
The inverter does not contain any user serviceable parts inside. Do not attempt to remove the cover the unit. Live main present inside the circuits can render and electric shock.

OPERATING MODES OF THE INVERTER

Mains/charging of the mode
The inverter function on Mains Mode when the input AC mains is within the stipulated range from 90V AC to 280 V AC. The charger section starts functioning and continues to boost charge the batteries till the top-up voltage is reached . Thereafter the batteries are pulse charged to maintain optimum battery condition for an extended period of time.The connected loads are fed from input Mains Power. LED status indicator is GREEN. In the LCD models, mains Mode , Charging Mode, Mains input voltage, Battery level percentage etc are sequentially displayed on (16×2) backlit LCD.

Inverter / Backup mode
In the event of brownouts (<90V AC) on High Voltage (>280V AC) or Total Mains Failure(blackouts), the Inverter switches to loads derived from the Batteries. The Inverter keeps on supplying power till the time the battery gets depleted, in which case the inverter put out an alarm and thereafter shuts off. During invertor Mode, if for any reason the inverter gets overloaded , it trips and then restart after a while. The inverter makes a total of 5 restart attempts. Front panel LED status indicator is RED. In the LCD models, Inverter mode, Battery level percentage, Load level percentage, Input voltage level etc are sequentially displayed on (16×2) backlit LCD.

REAR PANEL DESCRIPTION

Three Pin Mains input Terminal Block for mains input
Positive (Red) & Negative (Black) Battery Leads
Output Socket for connecting Load
Circuit Breaker for Mains Input Protection.

Technical Specification

Input Voltage Range :	90-280 V AC
Low voltage Cut-Off :	90 V AC+ 10 V
High Voltage Cut-Off :	280 V AC + 10 V
Output Voltage (on Mains) :	Same as input
Output Voltage (on Batt) :	195-245 V AC
Transfer Time :	Within 20 ms
Frequency (on Batt) :	50 HZ + 1%
Charging Current :	10% of Battery Content
Pulse Charging Mode :	Auto Top-up Pulse Mode
Mains Mode Overload :	Circuit Breaker Trip
Inverter Mode Overload :	Electronic Shut Down
Auto Restart Feature :	Yes
Inverter short circuit :	Electronic Shut Down

View Complete Details

Ask Latest Price & Details

Offline UPS

Uninterrupted PowerAutomatic emergency backup power available in the event of power failure.

Voltage RegulationProvide regulated output for wide range of input voltage variations.

Surge ProtectionFull time protection against AC line surge, Spike, Noise and interference.

Modem ProtectionProvides protection against lightning strike entering the system through modem lines.

ProtectsYour precious software, PC and peripherals.

Model	U.P.S. 600	U.P.S. 700	U.P.S. 1250	U.P.S. 2000
Capacity	600 VA	700 VA	1250 VA	2 KVA

Input
Input Voltage Range	145V – 265 V AC
Frequency Range	50 HZ + 5%
Phase	Single Phase
Regulation of Mains	Automatic Voltage Regulation

Output
Output Voltage	220 V AC + 10%
Regulation Voltage on Battery	Pulse Width Modulation
Transfer Time	3 – 7 ms (typical)
Waveform	Stepped approximation of Sine wave
Efficiency	> 83%
Power Factor	0.7 lag to unity

Protection
Surge	E . M . I. , R . F. I., Spike and Surge Protection Provided
Input Fuse	Fuse Protection Provided
Short Circuit Protection	Pulse to Pulse Electronic Shutdown Provided
Modem / Network	RJ – 11 or RJ – 45 Jack optional
Noise Level
Audible Noise	< 40 dBA or one meter
RFI Noise	< 10dB at 0.15 MHZ, < 50 dB at 50 MHZ

Crest Ratio
Crest Ratio at Output	3:1

Annunciations & Alarms
Charging / Mains Mode	Green LED On
Battery Low / Overload	Red LED With buzzer

Battery
Built in Models	Sealed Lead Acid Maintenance Free Batteries built- in
Charger	Fully Optimized CC – CV Charger
Protection	Overcharge , Deep Discharge Protection Provided
Extended Backup Models	Sealed or Stationary Lead Acid or Tubular Plate Batteries upto 100 Ah Connected externally

Physical
Dimensions H X W X D (inches)	6.5 X 4 X 12	7 X 4.5 X 13	8 X 6 X 14	8 X 6 X 14
Weight (Kgs)	6.5	10.5	16.0	18.0

Ambient Conditions
Temperature 0oC ~ 48o C; 32oF ~ 120o F
Humidity <95% R . H. (non condensing)

View Complete Details

Ask Latest Price & Details

Online UPS With Isolation

Ideal for embroidery, knitting, quilting, sortex, flex & digital printing, medical, server, networking & computer application.

View Complete Details

Ask Latest Price & Details

Multipurpose CFL Inverter

Ideal for home, shops, party , picnic and camping etc.
Material : High quality ABS plastic bodyHolder: CFL or Bulb holderStrong LED torchUSB Port : Pen drive for music & Mobile Charging through USBDigital FM RadioSMPS Charger of 8 Amp (switch mode power supply)12V 7.2Ah maintenance free dry batteryBattery Charging- 100 Volt To 280 Volt3 Inch High Quality SpeakerLoad: Upto 45 wattsCharging Cut: 14.2 VoltOverload: 60WLow Battery Cut: 9.5 VoltDigital controller base designHigh frequency PWM (pulse-width modulation)Indication: Overload, Charging On , Mains On, UPS On, Low battery, Over load.Supports 4 10W CFL (Not included), Only one CFL is connected, rest three needs to be connected with wires/holdersPlugs : 3 x 2 pin plugsSolar panel input port, you can directly connect external solar panel (not included)Fuse : over load protection fuse (10 Amp)Digital panel buttonsYou can run DC voltage operated mini fanFull function Remote Control2 Pin power cord : 1.5 MeterMinimum 5 hours continues charging required

Note : Specifications are subject to change without notice.

View Complete Details

Ask Latest Price & Details